Innovate Machine Cleaning and Maintenance Quiz
20 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which sanitizer should be used to clean the outside of the injector compartment?

  • Water
  • Air
  • Virkon (correct)
  • Klericide
  • How many times should the injector 1 button be pressed rapidly to draw up Klericide?

  • 1 time
  • 2 times
  • 4 times
  • 3 times (correct)
  • What should be done with the uptake tubes after drawing up air from the lines?

  • Insert them into a container with water (correct)
  • Dispose of them
  • Leave them in the waste container
  • Clean them with Klericide
  • How many times should the injector 1 button be pressed rapidly to draw up water?

    <p>2 times</p> Signup and view all the answers

    What should be done with the injectors after cleaning them?

    <p>Place them back into their respective holders</p> Signup and view all the answers

    What should be used to clean the fire extinguisher?

    <p>Klericide</p> Signup and view all the answers

    How should the fridges be organized?

    <p>Alphabetical order</p> Signup and view all the answers

    When should the water level in the autoclaves be checked and topped up if necessary?

    <p>Before every run</p> Signup and view all the answers

    How should the autoclave be drained of old water?

    <p>Using gravity</p> Signup and view all the answers

    What should be done before cleaning the storage and media shelving?

    <p>Remove everything off the shelves</p> Signup and view all the answers

    Which cleaning solution should be used to clean the outside of the Innovate?

    <p>Virkon</p> Signup and view all the answers

    How often should the Monthly Maintenance & Cleaning kit be used on each injector line on each Innovate?

    <p>Once a month</p> Signup and view all the answers

    What should be done if the waste collection bottle is more than half-way full?

    <p>Empty it into the liquid waste drum</p> Signup and view all the answers

    How long should Reagent 1 be left on the instrument?

    <p>20 hours</p> Signup and view all the answers

    What should be done after removing Reagent 1?

    <p>Connect Reagent 2</p> Signup and view all the answers

    How long should Reagent 2 be left on the injectors?

    <p>30 minutes</p> Signup and view all the answers

    What should be done after removing Reagent 2?

    <p>Replace injectors with Microwash</p> Signup and view all the answers

    What should be done after removing Reagent 3?

    <p>Replace injectors with Microwash</p> Signup and view all the answers

    What should be done after replacing injectors with Microwash?

    <p>Click on 'instrument' then 'wash'</p> Signup and view all the answers

    When can the instrument be used for assays?

    <p>Immediately after completing the cleaning procedure</p> Signup and view all the answers

    More Like This

    Belang van innovatie in ondernemen
    5 questions
    Meaning of the Word 'Innovate'
    28 questions
    Using Core Values to Innovate
    21 questions
    Use Quizgecko on...
    Browser
    Browser