Industrial Safety and Sterilization Procedures

What is the primary reason for investigating excessive wetness in a WD process?

To identify the root cause of the problem, whether it's blocked arms, incorrect loading, or WD settings

What is the consequence of a device not being properly disassembled in the wash area?

The entire tray must be considered contaminated and sent back to the wash area via the transfer hatch

Who should be notified immediately in the event of a non-conformance or rejected load?

The line manager

Why is it recommended to wear shoes that cover the feet?

To protect shoes from contamination Signup and view all the answers

What is the purpose of checking the chart record for the cycle?

To confirm that the recorded variables are within the permitted parameters Signup and view all the answers

What is the primary purpose of quality checks during the unloading process?

To ensure correct cycle usage Signup and view all the answers

What must be inspected visually during the quality checks?

The instruments for soil or stain Signup and view all the answers

What determines the next steps in the process after unloading?

Local policies, procedures, and guidelines Signup and view all the answers

What is the consequence of Spray arm rotation hindrance in the WD process?

The entire load has been compromised and must be returned for re-processing Signup and view all the answers

What is the recommended action if a load is found to have been processed using an incorrect cycle?

Reject the load and send it back for reprocessing Signup and view all the answers

Why is it crucial to handle utensils like gallipots or kidney dishes with care during unloading?

They may have turned upside down during the washing process Signup and view all the answers

What is the maximum temperature that the chamber of the washer-disinfector can reach?

90°C Signup and view all the answers

What is the primary reason for performing a visual inspection of the load?

To identify any damage, staining, or residue on the instruments Signup and view all the answers

What should be done if a small percentage of RMD in a load were not cleaned and/or dried effectively?

The entire load should be returned for reprocessing Signup and view all the answers

What is a rejection criterion for manually cleaned devices?

Any visible soil or staining Signup and view all the answers

Why is it important to ensure the load is dry before moving to the IAP room?

To prevent the growth of microorganisms Signup and view all the answers

What should be done with items that have been manually cleaned and disinfected but are not dry?

They should be reprocessed Signup and view all the answers

Why must documentation be completed for manually cleaned items and rejected items?

To report nonconformances and rejected items to the line manager Signup and view all the answers

What is the primary purpose of inspecting devices for free movement of all parts and non-sticking joints?

To detect any potential damage during the cleaning process Signup and view all the answers

What is the primary function of a track and trace system in a modern CSSD?

To accurately track devices and device trays through the decontamination process Signup and view all the answers

What occurs when a new processing cycle begins in a computerized track and trace system?

A new unique unit number is produced each and every time Signup and view all the answers

What is the purpose of using a water-based lubricant in the maintenance of devices?

To overcome any issues with non-sticking joints Signup and view all the answers

What is the primary advantage of using a computerized track and trace system over a manual system?

It allows for more accurate tracking of devices and device trays Signup and view all the answers

What information is stored by the PC's connected to handheld barcode readers in a computerized track and trace system?

The information for each tray and device Signup and view all the answers

What is the usual arrangement of items in a surgical instrument tray?

From left to right in the order of use Signup and view all the answers

Why is it important to have an accurate checklist for surgical instrument trays?

To ensure consistency across different procedures Signup and view all the answers

What is the purpose of placing forceps on instrument pins?

To prevent tangling and reduce clutter Signup and view all the answers

What should be done with devices that have ratchets during sterilization?

They should be left open to ensure proper sterilization Signup and view all the answers

Why is it important to follow the manufacturer's IFU for device sterilization?

To ensure that devices are sterilized in a particular way Signup and view all the answers

What is the purpose of verifying the contents of a surgical instrument tray against its checklist?

To ensure that all items are accounted for Signup and view all the answers