SOP 608 Hose Loads

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the position of the Officer Rear Discharge in relation to the apparatus?

Farthest from the center

Closest to the center (correct)

On the right side

On the left side

What shape does the first fold at the rear of the hose bed take when processing the 50-foot section?

Straight fold

Dog ear (correct)

Zigzag fold

Double fold

How much of the 1 ¾” hose is needed for the front bumper 150-foot pre-connect?

150 feet (correct)

200 feet

100 feet

175 feet

What technique is used to load the 150-foot pre-connect hose?

Donut roll Signup and view all the answers

Which nozzle is attached to the 100-foot pre-connect for Contender and Enforcer Engines?

75/175 fog nozzle Signup and view all the answers

When loading the 100-foot section of hose, what is the initial loading style used?

Flat load Signup and view all the answers

What is done with the male coupling when performing the donut roll?

It is placed on top of the female coupling. Signup and view all the answers

How is the hose secured after loading in the 150-foot pre-connect?

With two Velcro straps Signup and view all the answers

What is the primary purpose of the established procedure for hose loads?

To establish standards for loading hose in a safe and efficient manner Signup and view all the answers

What is a Minuteman load primarily designed for?

To assist in the stretching of hose Signup and view all the answers

What is the function of a Dog Ear in hose loading?

To allow easy access to hose for firefighters Signup and view all the answers

Which component represents the portion of the minuteman load placed on the firefighter’s shoulder?

Shoulder Load Signup and view all the answers

What type of coupling is used with the Fire Chief break-away nozzle in the rear pre-connect setup?

Female end coupling Signup and view all the answers

What is the intended length of the hose in the rear pre-connect setup specified?

150 feet Signup and view all the answers

What is the purpose of using a “J”-Strap during hose operations?

To secure courtyard stretches to solid objects Signup and view all the answers

Which type of nozzle is specified in the rear pre-connect configuration?

Fog nozzle with 75/175 tip Signup and view all the answers

What is the first step in loading the 100-foot sections of 1 ¾” hose?

Place the male coupling towards the cab. Signup and view all the answers

Where should the Break-A-Way smoothbore nozzle be positioned when loading the hose?

On the rear end of the hose bed facing the rear. Signup and view all the answers

How should the 100 feet of 1 ¾” hose be loaded to create the shoulder load?

In a flat load starting towards the cab. Signup and view all the answers

When connecting the hoses after loading, where should the couplings be placed?

On top of the 100 foot shoulder load nearest the nozzle. Signup and view all the answers

Which equipment is necessary for loading the Coil Hose Load?

A 6-foot hook. Signup and view all the answers

What is the correct method to secure the Coil Hose Load once it is fully loaded?

Place straps at the nozzle, middle, and opposite end. Signup and view all the answers

Where should the 2 ½” static load be located in relation to the apparatus?

Nearest to the driver's side of the apparatus. Signup and view all the answers

How much length of the 2 ½” static load should be used?

200 feet. Signup and view all the answers

What is the initial orientation of the female coupling when loading the 2 ½” hose on the driver side of the rear hose bed?

Facing the rear of the hose bed Signup and view all the answers

How is the 100 feet of 2 ½” hose loaded after the female coupling is attached to the driver's rear discharge?

In a flat load with a dog ear at the 50-foot interval Signup and view all the answers

What type of nozzle is attached to the 100-foot section of the 2 ½” hose?

Smoothbore nozzle with a 1 1/8” tip Signup and view all the answers

What technique is used to prevent the couplings from flipping over while loading the 3” hose?

Using a Dutchman Signup and view all the answers

What is the final placement of the male coupling after loading the 300 feet of 3” hose?

Near the rear of the hose bed with a full fold length on top Signup and view all the answers

What type of load is the left 3” hose bed required to have?

Minuteman load Signup and view all the answers

How is the entire length of the 200 feet of 2 ½” hose ultimately connected in the rear pre-connect?

The male of the drag load is connected to the female of the shoulder load Signup and view all the answers

What components are included in the loading of the 2 ½” rear pre-connect?

100 feet of flat load with a drag load and shoulder load Signup and view all the answers

What is the required length of the 5” hose attached to each pump panel side intake with a side-well?

50 feet Signup and view all the answers

Which type of hose must be loaded in a donut roll and stored in the rear compartment of Velocity Engines?

One 25-foot 5” hose section Signup and view all the answers

What is the flow rate for a Break-a-way Fog nozzle when used for structural firefighting?

175 gpm Signup and view all the answers

Which engine types require two 25-foot 3” hose sections loaded in a donut roll in the driver compartment?

Enforcer Engines Signup and view all the answers

How should the 5” hose for the side-well be loaded?

In a flat load Signup and view all the answers

What type of nozzle is described as having a 1-inch tip with a flow of 210 gpm?

Break-a-way Smoothbore nozzle Signup and view all the answers

What is the first step in loading a 5” hose in a flat load for the front intake?

Attach the threaded end to the swivel front intake Signup and view all the answers

What should each nozzle be engraved with?

The respective station number Signup and view all the answers

Study Notes

Hose Load Standards

Established standards for the safe and efficient loading of hose supplies on fire apparatus.
Minimum quantities defined for various types of hose loads.

Glossary of Terms

Minuteman Load: Simplifies hose stretching.
Dog Ear: Large fold at 50-foot intervals, aids in hose removal.
Shoulder Load: Portion of minuteman load carried on the shoulder, typically 100 feet.
Drag Load: Portion of minuteman load dragged behind during stretch.
"J"-Strap: Carabineer and webbing device secures courtyard stretches.

1 ¾” 150-foot Rear Pre-Connect

Consists of 150 feet of 1 ¾” hose with connected Fire Chief break-a-way nozzle.
Loaded in minuteman fashion with specific connections:
- Female end connects to Officer Rear Discharge.
- First fold is a dog ear at the hose bed's rear.
- Male coupling towards the cab creates drag load.

1 ¾” Front Bumper Pre-Connect

150 feet of 1 ¾” hose with Fire Chief break-a-way nozzle on Pierce Velocity Engines.
Loaded using a donut roll:
- Hose folded and rolled tightly.
- Coupling secured facing forward in the hose well.

1 ¾” Front Bumper 100-foot Pre-Connect

100 feet of 1 ¾” hose loaded in a flat format on Contender and Enforcer Engines.
Male coupling attached and stored on top of hose load, secured by a cover.

1 ¾” Coil Hose Load

Consists of 100 feet of 1 ¾” hose loaded in a coil.
Nozzle attached and hose wrapped with Velcro straps to secure.
Stored on top of 2 ½” hose bed for accessibility.

2 ½” Static Load

200 feet of 2 ½” hose loaded flat on the driver’s side.
Female coupling faces the rear of the hose bed, ensuring easy access.

2 ½” Rear Pre-Connect

200 feet of 2 ½” hose loaded in minuteman order.
Smoothbore nozzle with 1 1/8” tip attached at designated points.

3” Hose Loads

Static Load: 300 feet of 3” hose loaded flat, utilizing Dutchman technique to prevent coupling flipping.
Courtyard Load: Loaded in minuteman fashion for effective deployment.

5” Hose Loads

Side-Wells: 50-foot sections attached at intake valves, loaded flat and secured with Velcro.
Front Intake: 25-foot section loaded flat and secured for easy access.

Donut Rolls

Each engine carries specified amounts of hose in donut rolls:
- Velocity Engines: 25-foot sections of 3” and 5” hose stored in designated compartments.
- Other Engines: Similar specifications with variations in storage locations.

Nozzle Specifications

1 ¾” Nozzles:
- Break-a-way Fog: Minimum flow of 175 gpm, adjustable to 200 gpm.
- Break-a-way Smoothbore: 1-inch tip with flow of 210 gpm.
Each nozzle engraved with respective station number for identification.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

This quiz covers the Standard Operating Procedure (SOP) 608 of the Clearwater Fire and Rescue Department, focusing on hose loads. Participants will learn about operational guidelines and methods to optimize fire suppression techniques. Ideal for fire service professionals and trainees.