Recent Lessons

Show all results for ""

FSG and FB Rules Updates

Choose a study mode

Play Quiz

Study Flashcards

Spaced Repetition

Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Download our mobile app to listen on the go

Get App

Questions and Answers

What is the primary consideration for designing and fabricating a vehicle?

Good engineering practices (correct)
Following the Figure 4 guidelines
Achieving the minimum static ground clearance
Installation of an active suspension system

What is the minimum distance from the outer diameter of the front and rear tires that defines the keep-out-zone?

75 mm (correct)
100 mm
50 mm
60 mm

What is the purpose of the keep-out-zone in the vehicle design?

To provide clearance for the wheel/tire assembly (correct)
To ensure the driver's safety during the race
To enhance the vehicle's aerodynamic performance
To ensure proper installation of the suspension system

What is the minimum static ground clearance required for any portion of the vehicle, excluding the tires?

30 mm (A) Signup and view all the answers

What is prohibited in the vehicle design?

Sliding skirts or other aerodynamic devices that contact the track surface (C) Signup and view all the answers

What is the condition for measuring the static ground clearance when an active suspension system is installed?

In the lowest adjustable position (D) Signup and view all the answers

What is the valid fuel type mentioned in the standard?

91 Octane (A) Signup and view all the answers

What is the requirement for fuel lines according to the standard?

To have a temperature rating (D) Signup and view all the answers

What is the standard for fire resistant clothing?

Its validity is added to the standard (A) Signup and view all the answers

What is the requirement for embroidered driver's clothing?

It must be clarified according to the standard (B) Signup and view all the answers

What is the requirement for vehicle number on the vehicle?

It must include the prefix (B) Signup and view all the answers

What is the standard for frontal head restraint system?

It is added to the standard (B) Signup and view all the answers

What is the purpose of the rule EV5.4.3?

To limit the rule to TSAL's green light (C) Signup and view all the answers

What is the main change in EV5.5.3?

A 60 degree C requirement is introduced for calculations (D) Signup and view all the answers

What is the purpose of the rule EV5.8.4?

To clarify the rule for voltage at the vehicle side of the AIRs (B) Signup and view all the answers

What is the main change in EV8.1.6?

A detailed handcart firewall specification is added (D) Signup and view all the answers

What is the purpose of the rule EV9.1.1?

To remove ESF Parts (C) Signup and view all the answers

What is the main change in EV12.1.3?

The rule is now clarified, and the test piece and test fixture must be presented at mechanical inspection (B) Signup and view all the answers

Flashcards are hidden until you start studying