Engine Ops | Hose Line Deployment 3
25 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the main benefit of utilizing the back stretch technique for deploying the hose bundle?

  • It minimizes the risk of messy hose deployment
  • It provides better water flow to extinguish the fire
  • It ensures timely delays in deploying the bundle
  • It allows for quick and efficient deployment in narrow spaces (correct)

Why is it important for firefighters to fully commit to the chosen technique when deploying the hose bundle?

  • To prevent messy hose deployment (correct)
  • To allow for quick and efficient deployment in narrow spaces
  • To minimize time delays in deploying the bundle
  • To ensure better water flow for fire extinguishment

What should firefighters remember when making entry into the structure, regardless of the deployment technique used?

  • To split the door as outlined in the manual (correct)
  • To fully commit to the chosen deployment technique
  • To avoid using the back stretch technique during entry
  • To walk the hose into place with a forward stretch

Why is being indecisive when deploying the hose bundle problematic for firefighters?

<p>It increases the risk of messy hose deployment (A)</p> Signup and view all the answers

What should firefighters ensure when deploying a modified minuteman load?

<p>Choosing the correct technique for deploying the load (D)</p> Signup and view all the answers

In what situation is utilizing the back stretch technique particularly beneficial?

<p>In areas where walking the hose into place with a forward stretch may be difficult (C)</p> Signup and view all the answers

What does the driver do after the nozzle firefighter walks between the cars?

<p>The driver pulls the loop section until it is tight and completely out of the hose bed. (C)</p> Signup and view all the answers

What does the crew achieve by placing the looped section between the two cars?

<p>Maximized working length of hose (D)</p> Signup and view all the answers

What does the pump operator do after the crew places all its workable hose on the fire side of the vehicles?

<p>Returns to the pump panel to charge the line (C)</p> Signup and view all the answers

What does the driver do with the loop section after it is pulled past the chosen opening?

<p>Places it between the two cars (A)</p> Signup and view all the answers

What does the nozzle firefighter do after reaching the opening between the two cars?

<p>Proceeds to walk in a straight line between the cars (A)</p> Signup and view all the answers

What action does the driver take at the back tire of the first target car?

<p>Waits with the loop section (A)</p> Signup and view all the answers

What happens to the driver with the loop section when the bundle is carried through by the nozzle firefighter?

<p>Continues to pull the loop until it is tight (A)</p> Signup and view all the answers

What is the main drawback of the back stretch?

<p>Crews have to backtrack their steps multiple times (D)</p> Signup and view all the answers

What is the key benefit of the forward stretch?

<p>Minimizing wasted effort by walking toward the structure (D)</p> Signup and view all the answers

In what type of environment is split stretching most beneficial?

<p>Tight urban environments and narrow access walkways (B)</p> Signup and view all the answers

What is crucial to remember when split stretching in relation to the door?

<p>The orientation of the hose nozzle and first coupling (C)</p> Signup and view all the answers

What does the formula for estimating hose stretch help with?

<p>Estimating how much hose is needed to cover the entire structure (D)</p> Signup and view all the answers

What is recommended if in doubt when estimating the size of a structure?

<p>Overestimate rather than cut it short (D)</p> Signup and view all the answers

What does pulling the engine past the structure allow for?

<p>Easier access for ladder deployment (D)</p> Signup and view all the answers

What is the goal of splitting cars when performing a fire deployment?

<p>&quot;To get 100' of usable hose on the fire side of the cars along the street&quot; (B)</p> Signup and view all the answers

"What should be rotated 180° to prevent a possible kink from forming?"

<p>Shoulder load (B)</p> Signup and view all the answers

What should be done before splitting cars during a two-firefighter deployment method?

<p>Start by pulling whichever section is closest to the building (C)</p> Signup and view all the answers

What should be deployed and set up for a successful attack after splitting cars for a two-firefighter deployment method?

<p>Nozzle firefighter's shoulder bundle (B)</p> Signup and view all the answers

What happens when there is too much hose in front of a house during hose advancement?

<p>It creates a potential safety hazard and slows down hose advancement (C)</p> Signup and view all the answers

More Like This

Primary Search FOG
20 questions

Primary Search FOG

DevoutCharacterization6077 avatar
DevoutCharacterization6077
Firefighter Rescue Techniques
43 questions
Use Quizgecko on...
Browser
Browser