Engine Ops | Teach Backs
16 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is required for the submission of a Teach-Back?

  • Only the completion acknowledgment by the Officer or A/O on paper
  • The completion acknowledgment by the Officer or A/O on Vector Solutions (correct)
  • The completion acknowledgment by the entire crew on Vector Solutions
  • The completion acknowledgment by the entire crew on paper

    • How many Teach-Back Skill Sheets must be completed and submitted by the apprentice firefighter?

  • 5
  • 3 (correct)
  • 4
  • 2

    • What is the method for submitting the paper evaluation forms filled out by the crew?

  • Faxed to an official contact at CFDJATC2@columbus
  • Mailed to Vector Solutions headquarters
  • Scanned and emailed to CFDJATC2@columbus (correct)
  • Submitted to the Officer or A/O in person

    • What is the total number of skill sheets that must be completed by the apprentice firefighter?

    <p>3 Teach-Back Skill Sheets and 3 Hands-On Skill Sheets</p> Signup and view all the answers

    What is the purpose of the apprentice firefighter's teach-back?

    <p>To stimulate discussion at the station level</p> Signup and view all the answers

    What must be done to submit a Hands-On Skill Sheet?

    <p>The Officer or A/O must log into Vector Solutions and acknowledge completion</p> Signup and view all the answers

    What is the goal of the apprentice firefighter while presenting the material during teach-backs?

    <p>To require minimal assistance from the crew</p> Signup and view all the answers

    What should be done as part of electronic acknowledgement for the Hands-On Skill Sheets?

    <p>List which skill sheets are being verified from which manual</p> Signup and view all the answers

    When should teach-backs be performed?

    <p>With minimal assistance from the crew</p> Signup and view all the answers

    What should be discussed during a teach-back about pressurized water cans?

    <p>The limitations, specifications, and components of pressurized water cans</p> Signup and view all the answers

    What is the appropriate use of Class B foam?

    <p>For foam operations using SM20FLP</p> Signup and view all the answers

    What should be explained during a teach-back about discharge relief valves?

    <p>What a discharge relief valve is and how it operates</p> Signup and view all the answers

    What needs to be explained regarding the operation of Pro-Pak during a teach-back?

    <p>Explain how to operate the Pro-Pak. Specify pressures, flows, and steps for cleaning after use.</p> Signup and view all the answers

    What needs to be explained regarding two-stage pump during a teach-back?

    <p>Explain how a two-stage pump works; explain the difference between pressure and volume</p> Signup and view all the answers

    When should Pressure Mode and RPM Mode be discussed during a teach-back?

    <p>While explaining the safety features of Pressure Mode: RPM Limit, Low Water, and No Water</p> Signup and view all the answers

    What needs to be discussed during a teach-back about foam concentrates?

    <p>Explain what can happen if two different types of foam concentrate are mixed</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser