Podcast
Questions and Answers
During the annual testing of the pump, the pressure achieved should be what percentage of the design pressure?
During the annual testing of the pump, the pressure achieved should be what percentage of the design pressure?
- 65% (correct)
- 75%
- 100%
- 50%
What is the required flow rate during the annual testing compared to the design flow rate?
What is the required flow rate during the annual testing compared to the design flow rate?
- 150% of the design flow rate (correct)
- 175% of the design flow rate
- 125% of the design flow rate
- 100% of the design flow rate
What is the design flow rate if the pressure is 600 kPa and the flow rate is 15,000 L/m?
What is the design flow rate if the pressure is 600 kPa and the flow rate is 15,000 L/m?
- 12,000 L/m
- 10,000 L/m
- 15,000 L/m (correct)
- 20,000 L/m
What is the required flow rate during the annual testing if the pressure achieved is 390 kPa?
What is the required flow rate during the annual testing if the pressure achieved is 390 kPa?
What is the normal practice for testing fire pumps, in addition to the annual capacity testing?
What is the normal practice for testing fire pumps, in addition to the annual capacity testing?
What is the minimum requirement for testing fire pumps?
What is the minimum requirement for testing fire pumps?
Which of the following components is NOT involved in the annual testing of the pump?
Which of the following components is NOT involved in the annual testing of the pump?
What is the pressure required to be achieved during the annual testing if the design pressure is 500 kPa?
What is the pressure required to be achieved during the annual testing if the design pressure is 500 kPa?
What is the required flow rate during the annual testing if the design flow rate is 20,000 L/m?
What is the required flow rate during the annual testing if the design flow rate is 20,000 L/m?
How often is it recommended to test run the fire pumps (not a capacity test) to ensure they are ready and able to start in an emergency?
How often is it recommended to test run the fire pumps (not a capacity test) to ensure they are ready and able to start in an emergency?
During the annual testing of the pump, what is the required flow rate if the pressure achieved is 455 kPa?
During the annual testing of the pump, what is the required flow rate if the pressure achieved is 455 kPa?
What is the design pressure if the required pressure during the annual testing is 390 kPa?
What is the design pressure if the required pressure during the annual testing is 390 kPa?
What is the required flow rate during the annual testing if the design pressure is 520 kPa?
What is the required flow rate during the annual testing if the design pressure is 520 kPa?
What is the required pressure during the annual testing if the design flow rate is 20,000 L/m?
What is the required pressure during the annual testing if the design flow rate is 20,000 L/m?
What is the design flow rate if the required pressure during the annual testing is 715 kPa?
What is the design flow rate if the required pressure during the annual testing is 715 kPa?
What is the required pressure during the annual testing compared to the design pressure?
What is the required pressure during the annual testing compared to the design pressure?
What is the required flow rate during the annual testing compared to the design flow rate?
What is the required flow rate during the annual testing compared to the design flow rate?
Which of the following components is involved in the annual testing of the pump?
Which of the following components is involved in the annual testing of the pump?
What is the minimum requirement for testing fire pumps?
What is the minimum requirement for testing fire pumps?
How often is it recommended to test run the fire pumps (not a capacity test) to ensure they are ready and able to start in an emergency?
How often is it recommended to test run the fire pumps (not a capacity test) to ensure they are ready and able to start in an emergency?
During the annual testing of the pump, what is the required flow rate if the pressure achieved is 520 kPa?
During the annual testing of the pump, what is the required flow rate if the pressure achieved is 520 kPa?
What is the design flow rate if the required pressure during the annual testing is 390 kPa?
What is the design flow rate if the required pressure during the annual testing is 390 kPa?
What is the required pressure during the annual testing compared to the design pressure?
What is the required pressure during the annual testing compared to the design pressure?
What is the normal practice for testing fire pumps, in addition to the annual capacity testing?
What is the normal practice for testing fire pumps, in addition to the annual capacity testing?
How often is it recommended to test run the fire pumps (not a capacity test) to ensure they are ready and able to start in an emergency?
How often is it recommended to test run the fire pumps (not a capacity test) to ensure they are ready and able to start in an emergency?
What is the required flow rate during the annual testing if the design flow rate is 20,000 L/m?
What is the required flow rate during the annual testing if the design flow rate is 20,000 L/m?
What is the required flow rate during the annual testing compared to the design flow rate?
What is the required flow rate during the annual testing compared to the design flow rate?
What is the required pressure during the annual testing if the design flow rate is 20,000 L/m?
What is the required pressure during the annual testing if the design flow rate is 20,000 L/m?
What is the required flow rate during the annual testing if the design pressure is 520 kPa?
What is the required flow rate during the annual testing if the design pressure is 520 kPa?
What is the required pressure during the annual testing if the design flow rate is 15,000 L/m?
What is the required pressure during the annual testing if the design flow rate is 15,000 L/m?
