Fire Department Safety Operations - Operating Power Tools

Questions and Answers

Which of the following is NOT a safety precaution specifically mentioned in the SOG regarding the operation of power saws?

Keep both hands on the control handles when operating the saw.

Have a plan of action before putting the saw into operation.

Carry the saw with engine stopped, blade forward, and muffler away from your body.

Ensure all power cords are properly grounded. (correct)

What is the main purpose of having a team of two people operate power saws, as stated in the SOG?

To ensure that someone is always present to provide first aid in case of an accident.

To increase efficiency by having one person cut and the other clear debris.

To have a second person assist and guide the operator, promoting safety. (correct)

To have one person operate the saw while the other communicates with other personnel.

According to the SOG, when should power tools be shut down?

When the power tool malfunctions or becomes damaged.

When the task is complete and the operator is ready to leave.

Whenever the operator is not actively using the tool. (correct)

Only when the operator needs to take a break.

Which of the following is a key element of a plan of action for operating a power saw, as outlined in the SOG?

Determining the location and sequence of cuts and openings. Signup and view all the answers

The SOG states that personnel operating power tools, and those in close proximity, must wear full protective clothing. Which of the following is NOT explicitly mentioned as part of this requirement?

Fire-resistant clothing Signup and view all the answers

What is the significance of the SOG's requirement for clothing to be “completely buttoned up and close fitting” when operating power tools?

To minimize the risk of clothing getting caught in moving parts. Signup and view all the answers

The SOG emphasizes the importance of considering wind direction before operating a power saw. Why is this crucial?

To prevent debris from being blown into the operator's face. Signup and view all the answers

What is the primary purpose of the SOG document as it relates to the operation of power tools?

To outline specific safety guidelines and procedures for power tool operation. Signup and view all the answers

What should be included in a pre-plan when working on a roof?

At least two means of egress if possible Signup and view all the answers

What is an appropriate practice when operating a power saw?

Cutting on horizontal surfaces near ground level Signup and view all the answers

What alternative is recommended for power saw use to prevent hazards?

Conducting cutting operations only under supervision Signup and view all the answers

What should you do if fuel is spilled while refueling a power saw?

Wipe off the saw before starting it Signup and view all the answers

Why should a carrying strap be used when climbing a ladder with a saw?

To keep one hand free for balancing Signup and view all the answers

What is one action that should NOT be taken when working in a flammable atmosphere?

Operating saws without precaution Signup and view all the answers

What is a critical consideration before ordering high-risk power saw operations?

Value gained versus extreme hazard to personnel Signup and view all the answers

What is a recommended practice when starting a saw after refueling in an enclosed space?

Ensure proper ventilation before starting Signup and view all the answers

Study Notes

Operating Power Tools

Full protective clothing, including face shield or eye protectors, must be worn when operating or near power tools to prevent accidents and ensure eye protection.
Clothing must be completely buttoned up and close-fitting to prevent accidents caused by moving parts.

Power Saws

Carry power saws with the engine stopped, blade frontward, and muffler away from the body.
Keep both hands on the control handles with a firm grip when operating the saw.
Ensure good footing before operating the saw.
Whenever possible, operate power saws in teams of two, with one person operating the saw and the other assisting and guiding.
Shut down power saws when unattended.
Plan the operation before starting, including the location and sequence of cuts, wind direction, and escape routes.

Safety Precautions

Always place the safety guard in the proper position before operating the saw.
Power saw operations are safest when cutting on horizontal surfaces near ground level or vertical surfaces at waist level or below.
Operating a power saw above chest height is extremely hazardous and should only be done under the direct order and supervision of an officer.
Use a carrying strap (safety harness) when carrying a saw while climbing a ladder to keep both hands free.
Take care to prevent ignition from sparks when operating near highly combustible or flammable materials.
Do not operate saws in suspected flammable/explosive atmospheres.

Fueling Guideline

Observe all safety regulations when handling fuel.
Never refuel a saw while the engine is running.
Wipe off spilled fuel before starting the saw.
Do not operate a saw with a fuel leak.
Do not restart a saw in a small enclosed space after refueling.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Standard Operating Guidelines for the Hoffman Estates Fire Department on safety operations, specifically on operating power tools, compliant with NIMS standards.