Fire Alarms SOG 100-03 Quiz
13 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What should personnel do if water flow is confirmed during a fire alarm response?

  • Gain access to the interior of the structure. (correct)
  • Immediately contact the monitoring company.
  • Activate the water gong alarm.
  • Silence the fire alarm system.
  • What is required to be maintained in a Knox Box in buildings with fire alarm systems?

  • Maintenance logs.
  • Fire drill schedules.
  • Emergency contact information.
  • Building access keys. (correct)
  • What action should be taken if the Knox Box is not functioning properly during an incident?

  • Proceed with forced entry immediately.
  • Ignore the malfunction if it is not an emergency.
  • Report it to the Bureau of Safety Services. (correct)
  • Wait for a key holder to arrive.
  • What should the Communication Center be advised of if no building representative is present?

    <p>The alarm has been silenced. (A)</p> Signup and view all the answers

    In the event that the proper keys are not available in the Knox Box during an emergency, what should the Company Officer do?

    <p>Determine if a key holder can respond timely. (A)</p> Signup and view all the answers

    What response code should units generally use when dispatched to an automatic fire alarm?

    <p>Code 1 (A)</p> Signup and view all the answers

    Under what circumstance may Company Officers choose to respond with Code 3?

    <p>Based on their discretion and information from the Communications Center (A)</p> Signup and view all the answers

    What action should responding units take if notified by a business that there is no emergency?

    <p>Continue Code 1 to verify the situation (D)</p> Signup and view all the answers

    How should personnel access a building if the interior is not readily visible from the exterior?

    <p>By using forcible entry methods (B)</p> Signup and view all the answers

    What should personnel check for on the alarm annunciator panel?

    <p>For activated pull stations or smoke detectors (A)</p> Signup and view all the answers

    What is the proper action regarding resetting a fire alarm system after checking for fire conditions?

    <p>Silence the alarm but do not reset the system (C)</p> Signup and view all the answers

    What is the correct response code for units dispatched to reported water flow alarms?

    <p>Code 3 (D)</p> Signup and view all the answers

    Which of the following actions is NOT part of the arrival procedure for a fire alarm response?

    <p>Reset the fire alarm upon arrival (C)</p> Signup and view all the answers

    Flashcards

    Code 3

    A designated signal used for emergency vehicles to travel at a faster speed, signifying urgency.

    Code 1

    A designated signal used for emergency vehicles to travel at a normal speed, signifying routine response.

    Water Flow Alarm

    An alarm triggered by a water sprinkler system activating, often indicating a potential fire or system malfunction.

    Annunciator Panel

    A central panel displaying information about the fire alarm system, often with a location of activated devices.

    Signup and view all the flashcards

    360-Degree Size Up

    The process of assessing the situation and identifying potential hazards and resources around a location.

    Signup and view all the flashcards

    Pull Stations

    Manually activated devices on a fire alarm system, usually in a visible location to alert for emergencies.

    Signup and view all the flashcards

    Smoke Detectors

    Devices that detect smoke and are part of a fire alarm system, triggering an alarm when smoke is detected.

    Signup and view all the flashcards

    Resetting a Fire Alarm

    The act of regaining control of a building or system after an emergency, such as resetting a fire alarm.

    Signup and view all the flashcards

    Locate the outside risers

    The process of physically locating and examining the external components of a fire alarm system.

    Signup and view all the flashcards

    Check for water flow

    Verify if water is actually flowing through the fire alarm system's plumbing. Check for signs like pressure gauges or water gong alarms.

    Signup and view all the flashcards

    Gain access to the building

    Access the inside of the building to understand the cause of the fire alarm activation.

    Signup and view all the flashcards

    Knox Box

    Buildings with fire alarm systems must have a Knox Box containing keys for emergency access.

    Signup and view all the flashcards

    Forced entry

    In case of an emergency, determine if a key holder can quickly provide access or if immediate forced entry is necessary.

    Signup and view all the flashcards

    Study Notes

    Palm Beach County Fire Rescue - Standard Operating Guideline (SOG 100-03) - Fire Alarms

    • Purpose: Establish procedures for responding to fire alarms.

    • Authority: Fire Rescue Administrator

    • Scope: Applies to all Emergency Operations personnel.

    • Procedure for Response:

      • Code 1 Response: Upon dispatch for an automatic fire alarm, units respond code 1.
      • Code 3 Discretion: Company Officers can use discretion to respond code 3, based on updated information from the Communications Center.
      • Monitoring Company Notification: If the Communications Center is notified by a monitoring company of a false alarm, all responding units should cancel.
      • No Emergency Notification: If the Communications Center is notified by a business or homeowner that there is no emergency, responding units continue code 1 verification.
    • Arrival Procedure:

      • Arrival Report: Provide an arrival report per SOG 210-01.
      • Building Inspection: Conduct a building inspection for fire, smoke, or water flow issues.
      • Access: Gain building access where possible but forcibly-enter if needed and indicators suggest an actual fire.
      • Alarm System Check: Locate and check alarm annunciator panel, pull stations, and smoke detectors for activation.
      • Fire Condition Check: Thoroughly search the building to determine fire conditions.
      • Alarm System Deactivation: Do not reset a fire alarm system.

    Water Flow Alarms Response

    • Response Code 3: Respond code 3 to reported water flow alarms.
    • Initial Evaluation: Conduct a 360 degree size up and check pressure gauges for water flow.
    • Gaining Access: Gain access to interior of the building if water flow is confirmed to investigate the alarm cause.
    • Building Access: All buildings must maintain building access keys in a Knox Box.
    • Report and Communication: Notify Building Representative or Communication Center of the situation, or silence alarm with notification to Communications Center.
      • Notifications to monitoring company is to be made if no representative is available.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    Test your knowledge on the Standard Operating Guidelines for responding to fire alarms as established by Palm Beach County Fire Rescue. This quiz covers procedures, response codes, and communication protocols relevant to all Emergency Operations personnel.

    More Like This

    Fire Alarm Evacuation Procedures Quiz
    10 questions
    Fire/Medical Alarms
    24 questions

    Fire/Medical Alarms

    AstonishedOnomatopoeia avatar
    AstonishedOnomatopoeia
    I-B-01 Response to Alarms 07/16/2020
    16 questions
    Use Quizgecko on...
    Browser
    Browser