Driver Improvement Program (DIP) Evaluation and Quality Assurance

Play an AI-generated podcast conversation about this lesson

Who is responsible for managing the quality assurance of the DIP?

The TRB

The BC

The AOS (correct)

The Fire Operations Assistant Chief

What is the deadline for submitting evaluations to the TRB AOS?

September 30 of each year

January 1 of each year

December 31 of each year

June 30 of each year (correct)

What is the purpose of the daily check of the apparatus?

To determine the condition of the vehicle for instant response and fire fighting duty (correct)

To perform routine maintenance on the apparatus

To prepare for emergency response commitments

To ensure the apparatus is in a state of readiness for daily operations

What is the primary function of departmental functions such as preplanning, company training, and inspections?

To prepare for emergency response commitments Signup and view all the answers

What happens to the evaluations after they are completed?

They are placed in the personnel's driver training file Signup and view all the answers

What is the importance of adhering to established procedures during apparatus inspections?

It is extremely important to adhere to established procedures Signup and view all the answers

What is the primary purpose of the brake emergency release valve?

To release the anchor lock to move the vehicle Signup and view all the answers

What is the minimum thickness of brake linings considered safe?

1/8 inch Signup and view all the answers

What should be inspected on the brake drum and linings?

Contaminants, such as grease or oil Signup and view all the answers

What is the purpose of the brake pedal and hand control valve?

To regulate air pressure throughout the air brake system Signup and view all the answers

What should be checked on brake hoses and lines?

Cracks, worn, or frayed conditions Signup and view all the answers

In what condition should the vehicle be during the inspection of the brake pedal and hand control valve?

In gear, rolling forward at five mph Signup and view all the answers

What is the purpose of a slack adjuster in a vehicle's brake system?

To provide a means for adjusting the slack in the brake linkage Signup and view all the answers

Why is it important to check the space between the rear dual tires?

To check for even spacing, damage, and foreign objects Signup and view all the answers

What is the function of a shock absorber in a vehicle?

To stabilize the vehicle's ride Signup and view all the answers

What is the purpose of carrying spare electrical fuses in a vehicle?

To ensure the vehicle is equipped with all necessary amperages Signup and view all the answers

What is the unit of measurement on a vehicle's speedometer?

Miles per hour Signup and view all the answers

What is the consequence of an adjustment that is too tight on the slack adjuster?

Wheel lock or excessive heat on the brake drum Signup and view all the answers

What is the primary purpose of rear running lights?

To indicate the vehicle's presence to other drivers Signup and view all the answers

What is the minimum distance to the side that side mirrors should be adjusted to see?

Two feet Signup and view all the answers

What is the primary function of lug nuts?

To hold the wheel on the axle Signup and view all the answers

What is the primary purpose of brake lights?

To indicate when the brakes are applied Signup and view all the answers

What is the correct color for clearance lights on the rear of a vehicle?

Red Signup and view all the answers

What is the purpose of inspecting response lights?

To ensure they are functioning properly Signup and view all the answers

What is the correct order of lights on top of a vehicle, from top to bottom?

Emergency, clearance, identification, reverse, tail/brake, turn signals Signup and view all the answers

What is the primary concern when inspecting a reflector?

Verifying the proper color and mounting Signup and view all the answers

When inspecting the tailboard, what should be done if signs of damage are found?

Check the frame for secondary damage Signup and view all the answers

What is the primary concern when inspecting the drive shaft?

Verifying the proper lubrication and securing couplings Signup and view all the answers

What should be done during an inspection of the exhaust system?

Verify the exhaust system is connected tightly and has no damage Signup and view all the answers

When inspecting the frame, what should be checked for?

Cracks, bends, and loose cross members Signup and view all the answers