Cyber-Physical Systems Quiz
30 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Actuators affect the digital world.

False

The sensor feeds data directly to the actuator.

False

An analog to digital converter is needed if the sensor directly senses digital data.

False

The processing system is a digital machine.

<p>True</p> Signup and view all the answers

A D to A converter is needed when giving data to a digital environment.

<p>False</p> Signup and view all the answers

Actuators can provide direct control in some cases.

<p>True</p> Signup and view all the answers

In order to keep the speed constant when friction increases, less force needs to be applied.

<p>False</p> Signup and view all the answers

IoT stands for Internet of Technology.

<p>False</p> Signup and view all the answers

Embedded systems usually consist of processing units, sensors, and actuators.

<p>True</p> Signup and view all the answers

Each system in IoT has its own dedicated internet connection.

<p>False</p> Signup and view all the answers

IoT systems can only communicate with systems within close range.

<p>False</p> Signup and view all the answers

Friction decreasing on a road requires more force to maintain the same speed.

<p>False</p> Signup and view all the answers

A microcontroller is a type of processor.

<p>True</p> Signup and view all the answers

A multiplier can be considered as a processor according to the text.

<p>True</p> Signup and view all the answers

Reactive systems react to non-urgent events.

<p>False</p> Signup and view all the answers

Transformational systems are involved in image processing.

<p>True</p> Signup and view all the answers

All processors mentioned in the text can only be implemented in hardware.

<p>False</p> Signup and view all the answers

Reactive systems do not work continuously but only when an event occurs.

<p>True</p> Signup and view all the answers

An answering machine is an example of a system that runs a single program repeatedly.

<p>True</p> Signup and view all the answers

General purpose systems are tightly constrained and can only serve a single purpose.

<p>False</p> Signup and view all the answers

Tightly constrained systems like answering machines must have high cost and consume a lot of power.

<p>False</p> Signup and view all the answers

Tightly constrained systems are usually preferred to be portable and run on batteries.

<p>True</p> Signup and view all the answers

Tightly constrained systems should always operate at very slow speeds.

<p>False</p> Signup and view all the answers

Programs in tightly constrained systems are typically written once and then run repeatedly in embedded processors.

<p>True</p> Signup and view all the answers

A real-time system will not cause any catastrophe if the picture capture is slow.

<p>True</p> Signup and view all the answers

If the image capture process is very slow, it is classified as hard real-time.

<p>False</p> Signup and view all the answers

Communication is not an important part of the embedded system ecosystem.

<p>False</p> Signup and view all the answers

The CCD processor data is communicated through a bus in the embedded system architecture.

<p>True</p> Signup and view all the answers

The JPEG codec is responsible for converting and compressing data in the embedded system.

<p>True</p> Signup and view all the answers

The UART function in the embedded system architecture converts serial data to parallel data.

<p>False</p> Signup and view all the answers

More Like This

Introduction to Cyber-Physical Systems
30 questions
Cyber Physical Systems Security Quiz
6 questions
Cyber Physical Systems
17 questions

Cyber Physical Systems

EndearingHydrogen avatar
EndearingHydrogen
Cyber-Physical Systems Module 1
16 questions
Use Quizgecko on...
Browser
Browser