11 Questions
What is the primary purpose of the assembly area in the CSSD?
To inspect and assemble surgical instruments
Who should perform the job in the assembly area?
Only trained decontamination specialists and technicians
What is the purpose of maintaining the assembly room under positive pressure?
To reduce the risk of airborne bacteria introduction
What is the temperature range for the comfortable working environment in the assembly room?
20-23°C
What is required for the furniture in the assembly area?
It should be made of smooth, non-porous, easy to clean materials
What should be followed for environmental cleaning in the assembly area?
Policies and procedures approved by the hospital infection control committee
Why is environmental cleaning essential in the IAP room?
To reduce the risk of patient infection
What is the primary function of microbiological monitoring in the IAP room?
To serve as an early warning system for environmental quality
What is the purpose of placing contact or settle plates in the IAP room?
To monitor the level of microorganisms in the environment
What is compared to the baseline counts of microorganisms during microbiological monitoring?
The results of the analysis
Why is it essential to carry out part of the sampling program when the facility is unoccupied?
To determine the baseline contamination level
Study Notes
Assembly Area in CSSD
- A clean area in CSSD where surgical instruments are inspected for intactness, cleanliness, and functionality before being dispensed to OR rooms or clinics.
- Critical task requiring trained decontamination specialists and technicians, following manufacturer's IFU.
Environmental Requirements for IAP
- Ventilation meets clean room standards according to ISO 14644-1: 1999 Class 8 or equivalent international standard.
- Room must be maintained under positive pressure to prevent airborne bacteria introduction.
- Temperature range: 20-23°C, relative humidity: 30-60%.
Environmental Cleaning
- Follows approved hospital infection control policies and procedures.
- Furniture must be made of smooth, non-porous, easy-to-clean materials.
- Daily cleaning is essential to prevent lint from air currents settling on clean surgical instruments, which can cause patient infections.
Dedicated Cleaning Room and Microbiological Monitoring
- A dedicated cleaning room is located within the IAP room to clean the area.
- Microbiological monitoring is carried out according to hospital infection control policies.
- Monitoring involves placing contact or settle plates in pre-planned locations, sending them to the lab for analysis, and comparing results to baseline counts of microorganisms.
Testing and Sampling
- Testing results should be the same or better than the baseline counts of microorganisms.
- Sampling program includes testing when the facility is unoccupied to achieve a baseline contamination level prior to sampling when occupied.
- This helps determine how well the IAP room is being cleaned and identifies contamination during traffic flows and peak periods.
Test your knowledge on the critical process of inspecting surgical instruments in the CSSD assembly area. Learn about the importance of trained personnel, manufacturer's IFU, and controlled environments in ensuring instrument cleanliness and functionality.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
