Construction Project: Two-Storey Hotel Specifications

Play an AI-generated podcast conversation about this lesson

What should be done to the steel trusses?

Steel trusses should be painted before installation.

Steel trusses should be galvanized before installation.

Steel trusses should be left unpainted.

Steel trusses should be painted after installation. (correct)

What is the requirement for roofing materials according to the text?

Roofing materials should be galvanized steel sheets.

Roofing materials should be asphalt shingles.

Roofing materials should be single-ply painted long span or its equivalent.

Roofing materials should be multi-ply painted long span or its equivalent. (correct)

How should the roofing sheets be stored according to the text?

Roofing sheets should be stored in a dry place, clear of the ground. (correct)

Roofing sheets should be stored stacked directly on the ground.

Roofing sheets should be stored in a wet place, clear of the ground.

Roofing sheets should be stored in a humid environment.

What type of finish is required for the concrete surfaces according to the text?

Concrete surfaces should have a cement plaster finish. Signup and view all the answers

What is the requirement for the installation of wall papers according to the text?

Wall papers should be installed under the direct supervision of an Architect or Interior Designer. Signup and view all the answers

What should be done to projecting wires and other design elements on the concrete surface?

Projecting wires and other design elements should be cut off or at least flushed with the surface. Signup and view all the answers

What type of wood should be used for panel doors?

Hardwood Signup and view all the answers

How deep should the side walls be tailed for engine crack repair?

5 cm Signup and view all the answers

What should flush type doors be made of?

Marine plywood Signup and view all the answers

How should door joints be constructed?

Tenoned and mortised joints glued well and planed Signup and view all the answers

What brand of hinges should be used?

Stanley Signup and view all the answers

What type of lock should be installed on door frames?

Yale locks Signup and view all the answers

What should be done with wall tiles before applying waterproofing?

Chipped off and cleaned thoroughly with a wire brush, washed with clean water, and painted up solid with 1:2 cement mortar Signup and view all the answers

What is the requirement for tiles and their accessories?

They should be free from imperfections that affect their quality, appearance, and strength Signup and view all the answers

How should tiles for wainscoting be installed?

Set in correct grades and level true to lines, laid even, and set vertical in accordance with the details shown on the drawing Signup and view all the answers

What type of cement paste should be used for laying tiles?

1:2 cement paste Signup and view all the answers

What brands of glazed tiles are recommended in the text?

'GRANITO' or 'MARIWASA' or other approved equivalent Signup and view all the answers

What code and regulations should the electrical work comply with?

The latest edition of the National Electrical Code of the Philippines and the Rules and Regulations of the Albay Electric Cooperative Signup and view all the answers

What type of building is being proposed?

A 2-storey hotel Signup and view all the answers

What should be followed in preference to measurement by scale when figures are given?

The figures given in the drawings Signup and view all the answers

How should materials be delivered and stored according to the specifications?

Both A and B Signup and view all the answers

What should be done with packages showing evidence of water or other damage?

They should be rejected Signup and view all the answers

According to the specifications, what should be furnished and installed?

Anything reasonably implied by either the specifications or drawings Signup and view all the answers

What should be done if there is a conflict between the drawings and written specifications?

The drawings and specifications are intended to cooperate, not contradict Signup and view all the answers

What material should be used for making tape in the installation process?

Copper solder-less connectors Signup and view all the answers

What type of boxes should be used for outlets and switches?

Plastic boxes Signup and view all the answers

Which type of gang boxes should be used for wall outlets?

Rectangular flush-type gang boxes Signup and view all the answers

What kind of switches should be provided as indicated on the plans?

Single pole and three-way switches of the flush tumbler type Signup and view all the answers

Where should convenience outlet receptacles be installed?

Flushed or wall-mounted Signup and view all the answers

Who has the authority to direct minor changes in the location of switches and receptacles?

Engineer Signup and view all the answers