18 Questions
What is the maximum length of a single segment in Standard Ethernet?
100m
What type of cable is used in 10Base2 implementation?
Thin coaxial cable
What is the topology used in 10Base2 implementation?
Bus topology
What is the encoding scheme used in Standard Ethernet?
Manchester encoding
What is the main advantage of using Manchester encoding in Standard Ethernet?
It is self-synchronous
What is the name of the first implementation of Standard Ethernet?
10Base5
What is the primary purpose of autonegotiation in Fast Ethernet?
To allow incompatible devices to connect to one another
What type of topology is required when connecting three or more stations in Fast Ethernet?
Star topology with a hub or switch
What type of cable is used in the four-wire implementation of Fast Ethernet?
Category 3 UTP
What is the data rate of a device that can work at a lower rate when communicating with a 100 Mbps capacity device?
10 Mbps
What is the purpose of autonegotiation in allowing one device to have multiple capabilities?
To allow a device to operate at multiple speeds
What type of cable is used in the 100Base-FX implementation of Fast Ethernet?
Fiber-optic cable
What is the reason for the nickname of 10Base5 Ethernet specification?
The size of the cable is similar to a garden hose
What is the topology used in 10Base5 implementation?
Bus topology
What is the advantage of using thin coaxial cable in 10Base2 implementation?
It is less expensive than thick coaxial cable
What is the maximum length of each segment in 10Base2 implementation?
185 m
What type of topology is used in 10Base-T implementation?
Star topology
What is the maximum length of the twisted cable in 10Base-T implementation?
100 m
Learn about the 10Base5 Ethernet specification, its bus topology, and the use of thick and thin coaxial cables. Understand how it works and its cost effectiveness.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
