PTI
21 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What should a driver do if passengers refuse to detrain?

  • Contact the police immediately.
  • Forcefully remove the passengers from the train.
  • Ignore the passengers and depart.
  • Inform the Signaller and discuss further action. (correct)

    • The driver is required to board the train to confront passengers who refuse to detrain.

    False (B)

    What technique should be used to carry out a train safety check along the train's length?

    Z scan technique

    After using the external saloon door, it is essential to ensure the door is properly closed and that the __________ light extinguishes.

    <p>orange hazard</p> Signup and view all the answers

    Match the following components of the dispatch process with their descriptions:

    <p>Local door close button = Ensures door is secured after use OTCM = Used for final interior checks via CCTV Signal check = Verification before train departure Z scan technique = Method for checking passenger safety at doors</p> Signup and view all the answers

    What must the driver announce as the train approaches the terminating station?

    <p>The train is no longer in service and will depart empty. (B)</p> Signup and view all the answers

    Once the passengers have alighted, the doors should remain open to prevent boarding in error.

    <p>False (B)</p> Signup and view all the answers

    What should the driver do after securing the train and shutting down the cab?

    <p>Check each coach for remaining passengers.</p> Signup and view all the answers

    If passengers refuse to detrain, the driver must inform the ______ and agree on further action.

    <p>Signaller</p> Signup and view all the answers

    What should the driver use to close the doors after passengers alight?

    <p>OTCM (B)</p> Signup and view all the answers

    Match the actions with the corresponding procedures for a train terminating and leaving as ECS:

    <p>Make an announcement = State the train is no longer in service Close doors using OTCM = Prevent passengers from boarding Check coach for passengers = Ensure safety before departure Inform Signaller = Discuss next actions if passengers refuse to detrain</p> Signup and view all the answers

    The driver should perform a final interior check using the internal saloon CCTV.

    <p>True (A)</p> Signup and view all the answers

    What is the purpose of using the orange hazard light during the door closing process?

    <p>It indicates whether the door is closed properly.</p> Signup and view all the answers

    What indicates that station work is complete according to Rule 9?

    <p>White dispatch bat or steady white light (C)</p> Signup and view all the answers

    According to the rules, drivers should check the starting signal only after closing the doors.

    <p>False (B)</p> Signup and view all the answers

    What action must a driver take if the CD/RA equipment is defective?

    <p>Observe the ready to start signal given by the PICOD.</p> Signup and view all the answers

    The driver must observe a _______ signal to confirm that station work is complete.

    <p>close doors indication</p> Signup and view all the answers

    What should a driver do when the PICOD is confirming the ready to start signal?

    <p>Observe a green flag or light held steady (C)</p> Signup and view all the answers

    A driver can initiate train movement without verifying that the starting signal displays a proceed aspect.

    <p>False (B)</p> Signup and view all the answers

    Match the rule with its corresponding requirement for drivers:

    <p>Rule 9 = Check starting signal before closing doors Rule 10 = Observe ready to start signal General Guidance = May pass starting signal at danger PICOD = Gives close doors indication</p> Signup and view all the answers

    In poor visibility, what does the ready to start signal look like?

    <p>A green light held steady.</p> Signup and view all the answers

    Study Notes

    Class 707 ECS Procedure

    • Train termination and dispatch as ECS (Empty Coaching Stock) occurs at unstaffed stations under Driver Controlled Operation (DCO).
    • Announcement required prior to arrival, indicating the train is no longer in service and will depart empty.
    • Doors are to be released after the train comes to a complete stop for passenger disembarkation.
    • Drivers must secure doors using the OTCM to prevent accidental boarding after passengers exit.
    • A thorough exterior check of each coach is necessary to ensure no passengers are left on board.
    • Use external saloon door handles for passenger egress, ensuring they are properly closed post-check.
    • In cases where passengers refuse to leave, the driver must contact the Signaller for advice, which may involve relocating the train.
    • Final interior check of the train should be conducted via internal saloon CCTV before leading cab setup for departure.

    Safety Checks Before Departure

    • A complete safety check must be performed using the ‘Z’ scan technique on the OTCM to verify door closure and ensure no individuals are trapped.
    • Confirmation of a clear starting signal is essential before departing, with strict adherence to not re-board the train to confront passengers.

    Rules for Dispatch with Monitoring Equipment Issues

    • For defective Platform CCTV, drivers must check:

      • Close doors indication from the PICOD (Passenger Information Control and Dispatch Officer).
      • Starting signal must display a proceed aspect prior to closing doors.
      • Ready-to-start signal observed from the PICOD position, indicated by a green flag or light, especially in poor visibility.

    • In case of defective CD/RA equipment:

      • Follow similar steps as for defective CCTV, ensuring close doors and ready-to-start signals are confirmed.
      • Drivers may need to pass starting signals at danger under specific circumstances.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Related Documents

    Southeastern Driver PTI Policy PDF 2021

    Description

    This quiz covers essential safety checks, passenger management, and compliance with operational protocols at unstaffed stations. Ensure you understand the necessary steps to prevent any mishaps during these procedures.

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser