Aircraft Maintenance Regulations

What LTP tag is used to signify that an article has passed receiving inspection and records the part’s movement?

In case of conflict between the MPM and IQ MOVE, which document's provision should be followed?

Who is LTP’s Accountable Manager as approved by CAAP?

What three actions should be taken when voiding maintenance documents to ensure traceability?

What is the minimum rest period required before a person can perform maintenance functions on an aircraft?

What is the maximum number of consecutive hours a person can be scheduled to perform maintenance functions on an aircraft?

Following unscheduled duty periods, what is the mandatory rest period for a person performing maintenance functions on an aircraft?

How many consecutive hours of relieved duties should a person performing maintenance functions receive during any 7 consecutive day period?

For EWIS initial training, which target group includes personnel who perform wiring system inspection?

What term describes parts that are too costly to repair compared to the price of a replacement?

What type of check involves quantitative empirical data to see if an item is performing within specified limits?

What type of check qualitatively confirms that a system or component is operating in a normal and intended manner?

What method is used to suggest improvements to a manual?

True or False: The purpose of the Work Turn Over Report Form is to ensure proper recording of incomplete maintenance or inspection tasks during shift changes.

What form is used for Line Maintenance Work Turn Over Logbook?

When must an Airworthiness Directive be complied with after it becomes effective?

The planning of maintenance tasks, and the organizing of shifts, shall take into account what?

What are the two recurrent items for Human Factors?

Where can LTP perform Base Maintenance?

What is an authorized individual called who wishes to void a signature or stamp on aircraft documents to make corrections?

Under JCAB, what classification of work does not require an operational test?

What type of work is LTP approved to perform under JCAB?

True or False: LTP is part of the LHT group approval for CAAP.

Where is the Base Maintenance location in LTP?

What does the letter represent in the stamp?

When parts are rejected during receiving inspection, what should be attached?

What are parts that if repaired would exceed the budget called?

Which manual is used for Korea MOLIT approval?

What steps must be taken to void a maintenance document?

When must work-done turn over be completed?

What approval number can be found on the Germany EASA Certificate?

What type of test checks the functionality of a component?

What type of test checks the operation of a component?

What does IMM stand for, and what is its general purpose?

Which manual is used for maintaining customer aircraft?

What documents are attached to raw and consumable materials?

What is the certificate for standard parts specification called?

What is the acceptable certificate of airworthiness for used components and repairable parts?

What is the CAAP AMO Certificate Number?

What is the Aviation Authority and approval number indicated in the release to service document of a European registered customer aircraft?

How to descibe IMM (Integrated Management Manual)

Where can LTP Policies and Procedure as an approved EASA Part 145 Maintenance Organization be found?

What is the validity of the LTP CAAP Approved Maintenance Organization Certificate Number?

Australia Approval Number and Manual used for LTP to conduct operation as Repair Station?

If there is a conflict between the MPM and IQ MOVE, which document takes precedence?

According to LTP, who is the Accountable Manager approved by CAAP?

What three actions must be taken when voiding maintenance documents to maintain traceability?