Aircraft Maintenance Regulations

What LTP tag is used to signify that an article has passed receiving inspection and records the part’s movement?

In case of conflict between the MPM and IQ MOVE, which document's provision prevails?

Who is LTP’s Accountable Manager as approved by the CAAP?

What three things shall be followed when voiding maintenance documents to ensure traceability and proper filing?

What is the minimum rest period required before a person can perform maintenance functions on an aircraft?

What is the maximum number of consecutive hours a person may be scheduled to perform maintenance functions on an aircraft?

Following unscheduled duty periods, what mandatory rest period is required for a person performing maintenance functions on an aircraft?

How many consecutive hours of rest must LTP provide to personnel performing maintenance functions during any 7 consecutive day period?

For EWIS Initial Training, which target group includes personnel who perform wiring system inspections?

What term describes parts where the repair/overhaul cost would exceed the replacement cost?

What type of check quantitatively verifies if an item's functions perform within specified limits?

What type of check qualitatively verifies that a system or component is operating in the normal and intended manner?

What method is used to submit proposals for improving a manual?

True or False: The purpose of the Work Turn Over Report Form is to ensure that unfinished maintenance/inspection tasks are recorded before a shift change to they are completed prior to return to service.

What form is used for Line Maintenance Work Turn Over?

When must an Airworthiness Directive be complied with after it becomes effective?

What factor must be taken into account when planning maintenance tasks and organizing shifts?

List the two recurrent requirements for Human Factors training.

Where is LTP authorized to perform Base Maintenance?

What is the title of an authorized individual who voids a signature or stamp impression on aircraft documents to correct or modify the entry?

Under JCAB regulations, what classification of work does not require an operational test?

What type of work is LTP approved to conduct under JCAB regulations?

True or False: LTP is part of the LHT group approval for CAAP.

Where is LTP's Base Maintenance location?

What does the letter in the stamp (e.g., 87744A) signify?

What documents should be attached to parts rejected during receiving inspection?

What term describes parts that are too expensive to repair?

Which manual is used for Korea MOLIT approval?

What information needs to be included when voiding a maintenance document?

When must a work turnover be documented?

What approval number can be found on the Germany EASA Certificate?

What type of test checks the functionality of a component?

What type of test checks the operation of a component?

What is the purpose of the IMM?

What type of manual is used for maintaining customer aircraft?

What documents are attached to raw and consumable materials?

What certificate is for standard parts specification?

What acceptable certificate of airworthiness is used for used components and repairable parts?

What is LTP CAAP AMO Certificate Number?

What LTP tag is used to signify that an article has passed receiving inspection and records the part’s movement from store, to aircraft, to the shop?

According to the content, who is LTP’s Accountable Manager as approved by CAAP?

What three actions are required to properly void a maintenance document to ensure traceability and proper filing?

According to the policy outlined, what minimum rest period must a person have prior to performing maintenance on an aircraft?

What document should personnel use to submit proposals to improve manuals?