Field PPE DECON

Play an AI-generated podcast conversation about this lesson

What is the purpose of the policy on on-scene cleaning procedures for personnel and PPE?

To discourage the field decontamination of PPE and SCBA after use at structure fires.

To minimize the risk of dermal absorption of carcinogenic contaminants and cross-contamination of fire apparatus cab interiors. (correct)

To limit the use of SCBA during structural firefighting operations at an incident.

To establish guidelines for using personal protective equipment (PPE) for non-firefighting activities.

Who does the policy apply to?

All fire station facilities in Fresno.

Only the incident commander at the fire scene.

Only those engaging in structural firefighting operations at an incident. (correct)

All personnel working at the Fresno Fire Department (FFD).

When should personnel ensure decontamination of their PPE and SCBA harness?

During the incident, regardless of exposure levels.

After returning from the incident to the fire station.

Before placing PPE and SCBA harness on apparatus after use. (correct)

At the discretion of the individual who wore it.

Who can deem the field decontamination of PPE or SCBA necessary?

The incident commander or their designee. Signup and view all the answers

What is the goal of the cleaning procedures for PPE and SCBA as per the policy?

To minimize potential exposure to smoke and products of combustion. Signup and view all the answers

What is not intended to limit or discourage as per the policy?

The field decontamination of PPE or SCBA if deemed necessary. Signup and view all the answers

What is the recommended ratio of Dawn dish soap to water for the soap solution in the 5-gallon bucket?

2 teaspoons of soap to 64 oz. of water Signup and view all the answers

What should be done immediately after removing the helmet, hood, and SCBA face-piece?

Remove contaminants from exposed skin using wet wipes Signup and view all the answers

What should be used to clean SCBA masks when members return to quarters?

Manufacturer’s recommended cleaning solution Signup and view all the answers

What should be avoided during on-scene cleaning of PPE?

Use of compressed air Signup and view all the answers

What is the purpose of allowing PPE/SCBA harness to air dry for at least 15 minutes before placing it back on the apparatus?

To remove volatile organic compounds Signup and view all the answers

What can potentially damage hearing during the decontamination process?

Use of compressed air Signup and view all the answers

When should wet wipes be used to remove contaminants from exposed skin?

After returning to quarters Signup and view all the answers

What should be used to pre-rinse the PPE/SCBA harness?

$25 foot section of marine grade water hose with 1/2” fittings Signup and view all the answers

What should NOT be used for on scene cleaning of PPE when active interior firefighting operations are ongoing?

$Garden hose spray nozzle with 1/2” fittings Signup and view all the answers

What is advised when using compressed air during the decontamination process?

$Appropriate hearing protection techniques should be employed Signup and view all the answers

What is recommended immediately after removing contaminants from exposed skin using wet wipes?

Scrub PPE/SCBA harness using scout brush soaked in soap solution Signup and view all the answers

What is advised after cleaning and drying soiled PPE in accordance with manufacturer’s guidelines?

Launder soiled day uniform items and place clean turnouts in service as soon as is practical. Signup and view all the answers

Field PPE DECON

Choose a study mode

Podcast

Questions and Answers