Monochrome and Colour Television (PDF)

http://fribok.blogspot.com/ NEW AGE INTERNATIONAL (P) LIMITED, PUBLISHERS New Delhi · Bangalore · Chennai · Cochin · Guwahati · Hyderabad Jalandhar · Kolkata · Lucknow · Mumbai · Ranchi PUBLISHING FOR ONE WORLD Visit us at www.newagepublishers.com http://fribok.blogspot.com/ Copyright © 2005, 1983, New Age International (P) Ltd., Publishers Published by New Age International (P) Ltd., Publishers All rights reserved. No part of this ebook may be reproduced in any form, by photostat, microfilm, xerography, or any other means, or incorporated into any information retrieval system, electronic or mechanical, without the written permission of the publisher. All inquiries should be emailed to [email protected] ISBN (13) : 978-81-224-2489-8 PUBLISHING FOR ONE WORLD NEW AGE INTERNATIONAL (P) LIMITED, PUBLISHERS 4835/24, Ansari Road, Daryaganj, New Delhi - 110002 Visit us at www.newagepublishers.com http://fribok.blogspot.com/ To My Wife PARKASH http://fribok.blogspot.com/ Preface Out of the various television systems in use in different countries, India adopted the 625-B monochrome (black and white) and the compatible PAL-B colour systems. Most European and many other countries are also using these standards. However, majority of the available books on television deal with the American 525 line monochrome and NTSC colour systems. Moreover, in the latest editions of the popular books on this subject, emphasis has totally shifted to colour television because of its wide acceptance in all the advanced countries. Since colour television has just been introduced in India, both monochrome and colour transmissions will co-exist for a long time in this country. Keeping these facts in view, this text has been prepared to provide an integrated approach with equal emphasis on both monochrome and colour systems. The book has been designed to meet the requirements of a modern text book on ‘Television Engineering’ for Electrical and Electronics Engineering students at the degree level. It will also meet the needs of a comprehensive course on TV Engineering in Polytechnics and Technical Schools. In addition the book will be of immense value to practising engineers and technicians. Students engaged in self study will also benefit very much from this text. The matter has been so presented that any Engineering student with a basic knowledge of the various electronic building blocks and fundamentals of communication systems will have no difficulty in understanding the subject. Comprehensive design criteria for various sections of the receiver have been given in each chapter without going into rigorous mathematical details. Due emphasis has also been laid on TV receiver servicing and servicing equipment. Detailed charts for locating faults and trouble shootting together with alignment procedures for the various sections of the receiver have also been included. Early TV receivers manufactured in India and other countries used vacuum tube circuitry. However, with rapid advances in technology, hybrid circuitry soon came into use and transistors replaced most vacuum tubes. With the widespread development of integrated circuits, special ICs are now available and are fast replacing discrete circuitry employing transistors. Since these developments have been very fast, sets employing tubes, only transistors and ICs are in use simultaneously. In view of this fact discussion of TV circuits using tubes, hybrid circuitry and ICs has been included in the chapter devoted to receiver circuits. The stress, however, is more on solid state receiver circuits and design. Because of the importance of colour transmission and reception, two comprehensive chapters have been exclusively devoted to the techniques of colour television and various colour television systems. All modern colour receivers use solid-state devices in most sections of the receiver. It is natural that receivers manufactured in India will also be of this type with specially http://fribok.blogspot.com/ designed ICs for performing almost all the functions in the receiver. Therefore, the description of colour receivers using vacuum tubes has been totally omitted. However, the functioning and use of special instruments necessary for the manufacture, testing and servicing all types of colour receivers has been included in corresponding chapters. Chapter 1 gives basic principles of TV transmission and reception. Chapters 2, 3 and 4 deal with analysis and synthesis of TV pictures, composite video signal and channel bandwidth requirements. Chapters 5 and 6 include discussion on receiver picture tubes and television camera tubes. Chapter 7 is on TV studio equipment and transmission principles. Chapter 8 gives a block schematic approach to monochrome TV receivers. Chapter 9 explains the propagation phenomena and antenna systems with special reference to TV transmission and reception. Chapter 10 is devoted to various applications of television. In Chapters 11 to 24 detailed circuit analysis and design principles of the various sections of the receiver are given. In Chapters 25 and 26 fundamentals of colour television and various colour TV systems have been fully described, naturally with a greater emphasis on the PAL-B & G systems. Chapter 27 is exclusively devoted to special circuits like remote control tuning, automatic fine tuning etc. Chapter 28 deals with all types of equipment needed for testing, alignment and servicing monochrome and colour receivers. Chapter 29 discusses in detail procedures for alignment of various sections of the receiver. Comprehensive details for trouble shooting and servicing are presented in Chapter 30. Diagnostic test charts are also included. The manuscript and its various pre-drafts have been used successfully by the author for a selective one semester course on TV Engineering at the final degree level at BITS, Pilani. About twice the material necessary for a one semester course is included in the book. By a judicious choice of chapters and sequencing the instructor can prepare suitable presentations for a two semester sequence for both degree and diploma students emphasising basic principles, overall systems or technological details. To assist the student and the instructor a set of review questions are included at the end of each chapter. R.R. Gulati http://fribok.blogspot.com/ Suggested Further Reading This book was published in 1983 and ever since its popularity has been growing. Its relevance as a comprehensive course in Television Engineering lies in its excellent presentation of the fundamentals of television transmission and reception. In it, analysis and synthesis of TV pictures, generation of composite video and audio signals, channel bandwidth requirements and design factors for various sections of the receiver have been evolved from first principles and supported with mathematical derivations where necessary. However, the author wishes to point out that during the past two decades or so, television receiver designs have gradually changed because of rapid technological advances in the field of entertainment electronics. Therefore, the students are advised to reinforce their learning by further reading books which describe latest techniques and circuits of modern television receivers. This author has contributed in this direction by writing the following three books now published by NEW AGE INTERNATIONAL PUBLISHERS. 1. COLOUR TELEVISION–PRINCIPLES AND PRACTICE. This book describes colour TV principles in depth and gives detailed insight of colour TV systems and standards, frequency synthesized tuning and channel selection, chroma processing sub-systems and matrixing, modern receiver circuits employing latest ICs and also colour receiver alignment and servicing. 2. MODERN TELEVISION PRACTICE–PRINCIPLES, TECHNOLOGY AND SERVICING. The main feature of this book is the side by side coverage of B&W and colour TV transmission and reception techniques for a better grasp of the entire field of television engineering. The 2nd edition of this book published in 2002 also contains chapters on Satellite Television Technology, Cable Television, VCR and Video Disc Recording and Playback, Teletext Broadcast Service and TV Games, Digital Television and Advanced Television Systems. 3. COMPOSITE SATELLITE AND CABLE TELEVISION. This book presents basics and systematic exposition to various equipments, devices, and circuit formulations involved in Satellite and Cable Television. Its 2nd edition contains extended coverage on Signal Encoding & Compression Techniques, Digital Satellite Transmission and Reception, Conditional Access (CAS) System, Direct-to-Home Satellite Broadcasts, High Definition TV (HDTV) and TV Home Entertainment Theatres. R. R. Gulati http://fribok.blogspot.com/ Contents Preface v Suggested Further Reading vii Introduction........................................................................................................................ 1 1. Elements of a Television System................................................................................... 8 1.1 Picture Transmission................................................................................................. 8 1.2 Sound Transmission................................................................................................. 11 1.3 Picture Reception..................................................................................................... 11 1.4 Sound Reception....................................................................................................... 12 1.5 Synchronization........................................................................................................ 12 1.6 Receiver Controls..................................................................................................... 13 1.7 Colour Television...................................................................................................... 13 2. Analysis and Synthesis of Television Pictures........................................................ 16 2.1 Gross Structure........................................................................................................ 16 2.2 Image Continuity...................................................................................................... 16 2.3 Number of Scanning Lines...................................................................................... 19 2.4 Flicker........................................................................................................................ 21 2.5 Fine Structure.......................................................................................................... 25 2.6 Tonal Gradation........................................................................................................ 31 3. Composite Video Signal................................................................................................. 36 3.1 Video Signal Dimensions......................................................................................... 36 3.2 Horizontal Sync Details........................................................................................... 39 3.3 Vertical Sync Details................................................................................................ 41 3.4 Scanning Sequence Details...................................................................................... 47 3.5 Functions of Vertical Pulse Train........................................................................... 49 3.6 Sync Details of the 525 Line System...................................................................... 49 4. Signal Transmission and Channel Bandwidth........................................................ 54 4.1 Amplitude Modulation............................................................................................. 54 4.2 Channel Bandwidth................................................................................................. 56 4.3 Vestigial Sideband Transmission............................................................................ 57 4.4 Transmission Efficiency........................................................................................... 58 4.5 Complete Channel Bandwidth................................................................................ 59 http://fribok.blogspot.com/ 4.6 Reception of Vestigial Sideband Signals................................................................ 60 4.7 Frequency Modulation............................................................................................. 62 4.8 FM Channel Bandwidth........................................................................................... 66 4.9 Channel Bandwidth for Colour Transmission....................................................... 67 4.10 Allocation of Frequency Bands for Television Signal Transmission.................... 68 4.11 Television Standards................................................................................................ 68 5. The Picture Tube............................................................................................................. 74 5.1 Monochrome Picture Tube....................................................................................... 74 5.2 Beam Deflection....................................................................................................... 76 5.3 Screen Phosphor....................................................................................................... 79 5.4 Face Plate.................................................................................................................. 79 5.5 Picture Tube Characteristics................................................................................... 82 5.6 Picture Tube Circuit Controls................................................................................. 82 6. Television Camera Tubes.............................................................................................. 86 6.1 Basic Principle.......................................................................................................... 86 6.2 Image Orthicon......................................................................................................... 89 6.3 Vidicon....................................................................................................................... 94 6.4 The Plumbicon.......................................................................................................... 97 6.5 Silicon Diode Array Vidicon..................................................................................... 99 6.6 Solid State Image Scanners................................................................................... 100 7. Basic Television Broadcasting................................................................................... 106 7.1 Television Studio.................................................................................................... 106 7.2 Television Cameras................................................................................................ 108 7.3 Programme Control Room..................................................................................... 110 7.4 Video Switcher........................................................................................................ 111 7.5 Synchronizing System............................................................................................ 115 7.6 Master Control Room (MCR)................................................................................. 117 7.7 Generation of Amplitude Modulation................................................................... 118 7.8 Television Transmitter.......................................................................................... 119 7.9 Positive and Negative Modulation........................................................................ 120 7.10 Sound Signal Transmission................................................................................... 122 7.11 Merits of Frequency Modulation........................................................................... 123 7.12 Generation of Frequency Modulation................................................................... 125 7.13 Stabilized Reactance Modulator............................................................................ 127 7.14 Generation of FM from PM.................................................................................... 128 7.15 FM Sound Signal.................................................................................................... 130 8. Television Receiver....................................................................................................... 134 8.1 Types of Television Receivers................................................................................ 134 8.2 Receiver Sections.................................................................................................... 135 8.3 Vestigial Sideband Correction............................................................................... 139 http://fribok.blogspot.com/ 8.4 Choice of Intermediate Frequencies..................................................................... 140 8.5 Picture Tube Circuitry and Controls.................................................................... 143 8.6 Sound Signal Separation....................................................................................... 143 8.7 Sound Section......................................................................................................... 144 8.8 Sync Processing and AFC Circuit......................................................................... 146 8.9 Vertical Deflection Circuit..................................................................................... 146 8.10 Horizontal Deflection Circuit................................................................................ 147 9. Television Signal Propagation and Antennas....................................................... 150 9.1 Radio Wave Propagation........................................................................................ 150 9.2 Television Signal Transmission............................................................................ 152 9.3 Interference Suffered by Carrier Signals............................................................. 153 9.4 Preference of AM for Picture Signal Transmission............................................. 155 9.5 Antennas................................................................................................................. 156 9.6 Television Transmission Antennas....................................................................... 161 9.7 Television Receiver Antennas............................................................................... 164 9.8 Colour Television Antennas.................................................................................. 170 9.9 Transmission Lines................................................................................................ 173 9.10 Attenuation Pads.................................................................................................... 178 10. Television Applications................................................................................................ 182 10.1 Television Broadcasting......................................................................................... 182 10.2 Cable Television...................................................................................................... 182 10.3 Closed Circuit Television (CCTV)......................................................................... 186 10.4 Theatre Television.................................................................................................. 188 10.5 Picture Phone and Facsimile................................................................................. 189 10.6 Video Tape Recording (VTR)................................................................................. 189 10.7 Television via Satellite........................................................................................... 196 10.8 TV Games................................................................................................................ 199 11. Video Detector................................................................................................................ 210 11.1 Video (Picture) Signal Detection........................................................................... 210 11.2 Basic Video Detector.............................................................................................. 211 11.3 IF Filter................................................................................................................... 213 11.4 DC Component of the Video Signal...................................................................... 215 11.5 Intercarrier Sound.................................................................................................. 216 11.6 Video Detector Requirements................................................................................ 217 11.7 Functions of the Composite Video Signal............................................................. 217 12. Video Section Fundamentals...................................................................................... 220 12.1 Picture Reproduction............................................................................................. 220 12.2 Video Amplifier Requirements.............................................................................. 220 12.3 Video Amplifiers..................................................................................................... 225 12.4 Basic Video Amplifier Operation.......................................................................... 228 http://fribok.blogspot.com/ 12.5 Comparison of Video Signal Polarities in Tube and Transistor Circuits........... 230 12.6 Relative Merits of Grid and Cathode Modulation of the Picture Tube.............. 233 13. Video Amplifiers—Design Principles....................................................................... 236 13.1 Vacuum Tube Amplifier......................................................................................... 236 13.2 High Frequency Compensation............................................................................. 238 13.3. Low Frequency Compensation.............................................................................. 243 13.4 Transistor Video Amplifier.................................................................................... 245 13.5 Transistor Circuit Analysis................................................................................... 246 13.6 Guidelines for Broad-Banding............................................................................... 250 13.7 Frequency Compensation...................................................................................... 251 13.8 Video Driver............................................................................................................ 254 13.9 Contrast Control Methods..................................................................................... 254 13.10 Screen Size and Video Amplifier Bandwidth....................................................... 257 14. Video Amplifier Circuits.............................................................................................. 260 14.1 Direct Coupled Video Amplifier............................................................................ 260 14.2 Problems of DC Coupling....................................................................................... 262 14.3 Partial DC Coupling............................................................................................... 264 14.4 Consequences of AC Coupling............................................................................... 267 14.5 DC Reinsertion....................................................................................................... 269 14.6 AC Coupling with DC Reinsertion........................................................................ 270 14.7 The AC Coupling.................................................................................................... 271 14.8 Video Preamplifier in an IC Chip......................................................................... 272 15. Automatic Gain Control and Noise Cancelling Circuits..................................... 276 15.1 Advantages of AGC................................................................................................ 276 15.2 Gain Control of VT and FET Amplifiers............................................................... 277 15.3 Gain Control of Transistor Amplifiers.................................................................. 278 15.4 Types of AGC.......................................................................................................... 279 15.5 Various AGC Systems............................................................................................ 281 15.6 Merits of Keyed AGC System................................................................................ 285 15.7 Delayed AGC........................................................................................................... 285 15.8 Noise Cancellation.................................................................................................. 286 15.9 Typical AGC Circuits............................................................................................. 287 15.10 AGC Adjustments................................................................................................... 291 16. Sync Separation Circuits............................................................................................. 296 16.1 Sync Separator—Basic Principle.......................................................................... 296 16.2 Sync Separator Employing a Pentode.................................................................. 298 16.3 Transistor Sync Separator..................................................................................... 299 16.4 Noise in Sync Pulses.............................................................................................. 300 16.5 Typical Tube Sync Separator Circuit.................................................................... 302 16.6 Transistor Noise Gate Sync Separator................................................................. 303 http://fribok.blogspot.com/ 16.7 Improved Noise Gate Sync Separator.................................................................. 304 16.8 Sync Amplifier........................................................................................................ 305 17. Sync Processing and AFC Circuits........................................................................... 308 17.1 Sync Waveform Separation................................................................................... 308 17.2 Vertical Sync Separation....................................................................................... 309 17.3 Horizontal Sync Separation................................................................................... 311 17.4 Automatic Frequency Control............................................................................... 312 17.5 AFC Circuit Employing Push-Pull Discriminator............................................... 313 17.6 Single Ended AFC Circuit..................................................................................... 316 17.7 Phase Discriminator (AFC) with Push-Pull Sawtooth........................................ 318 17.8 DC Control Voltage................................................................................................ 319 18. Deflection Oscillators................................................................................................... 324 18.1 Deflection Current Waveforms.............................................................................. 325 18.2 Generation of Driving Voltage Waveforms.......................................................... 327 18.3 Blocking Oscillator and Sweep Circuits............................................................... 329 18.4 Multivibrator Deflection Oscillators..................................................................... 335 18.5 Complementary-Symmetry Relaxation Oscillator.............................................. 340 18.6 Sine-Wave Deflection Oscillators.......................................................................... 341 19. Vertical Deflection Circuits........................................................................................ 346 19.1 Requirements of the Vertical Deflection Stage.................................................... 346 19.2 Vacuum Tube Vertical Deflection Stage............................................................... 354 19.3 Transistor Multivibrator Driven Vertical Output Stage..................................... 356 19.4 Blocking Oscillator Driven Output Stage............................................................. 357 19.5 Transformerless Output Circuit............................................................................ 358 19.6 Vertical Sweep Module.......................................................................................... 359 19.7 The Miller Deflection Circuit................................................................................. 360 19.8 Integrated Circuit for the Vertical System.......................................................... 362 20. Horizontal Deflection Circuits................................................................................... 366 20.1 Horizontal Output Stage........................................................................................ 366 20.2 Equivalent Circuit.................................................................................................. 367 20.3 Horizontal Amplifier Configurations.................................................................... 370 20.4 Vacuum Tube Horizontal Deflection Circuit........................................................ 370 20.5 Sequence of Operations.......................................................................................... 377 20.6 Horizontal Amplifier Controls............................................................................... 378 20.7 ‘S’ Correction........................................................................................................... 381 20.8 Improved Line Output Circuit.............................................................................. 382 20.9 Output Circuit Stabilization.................................................................................. 384 20.10 Transistor Horizontal Output Circuits................................................................. 385 20.11 Transistor Line Output Stage............................................................................... 386 20.12 Horizontal Combination IC-CA.920...................................................................... 388 http://fribok.blogspot.com/ 20.13 Horizontal Deflection Circuits in Colour Receivers............................................. 391 20.14 SCR Horizontal Output Circuit............................................................................. 394 21. Sound System.................................................................................................................. 400 21.1 Sound Signal Separation....................................................................................... 400 21.2 Sound Take-off Circuits......................................................................................... 401 21.3 Inter-carrier Sound IF Amplifier.......................................................................... 403 21.4 AM Limiting............................................................................................................ 404 21.5 FM Detection.......................................................................................................... 405 21.6 FM Sound Detectors............................................................................................... 408 21.7 Sound Section Integrated Circuits........................................................................ 420 21.8 Audio Output Stage................................................................................................ 423 22. RF Tuner.......................................................................................................................... 428 22.1 Tuner Operation..................................................................................................... 428 22.2 Factors Affecting Tuner Design............................................................................ 429 22.3 Basic Coupling Circuits......................................................................................... 430 22.4 Tuner Circuit Arrangement.................................................................................. 434 22.5 Types of Tuners...................................................................................................... 436 22.6 Various Sections of a VHF Tuner.......................................................................... 438 22.7 Electronic Tuning................................................................................................... 441 22.8 Vacuum Tube Tuner............................................................................................... 444 22.9 Transistor Tuners................................................................................................... 445 22.10 UHF Tuners............................................................................................................ 447 23. Video IF Amplifiers....................................................................................................... 452 23.1 Video IF Section...................................................................................................... 452 23.2 IF Amplifiers........................................................................................................... 454 23.3 Vacuum Tube and Solid-State IF Amplifiers....................................................... 455 23.4 Vestigial Sideband Correction............................................................................... 460 23.5 The IF Sound Signal.............................................................................................. 460 23.6 Adjacent Channel Interference............................................................................. 460 23.7 Video IF Amplifier Circuits................................................................................... 463 23.8 IF Sub-systems Employing ICs............................................................................. 465 24. Receiver Power Supplies............................................................................................. 472 24.1 Low Voltage Power Supplies................................................................................. 473 24.2 Types of Rectifier Circuits..................................................................................... 475 24.3 Heater Circuits....................................................................................................... 478 24.4 Voltage Regulators................................................................................................. 479 24.5 Low Voltage Power Supply Circuits..................................................................... 482 24.6 High Voltage Power Supply................................................................................... 483 24.7 Stabilized Thyristor Power Supply....................................................................... 484 24.8 Switch Mode Power Supply (SMPS)..................................................................... 485 http://fribok.blogspot.com/ 25. Essentials of Colour Television................................................................................. 490 25.1 Compatibility.......................................................................................................... 490 25.2 Natural Light.......................................................................................................... 491 25.3 Colour Perception................................................................................................... 492 25.4 Three Colour Theory.............................................................................................. 493 25.5 Luminance, Hue and Saturation........................................................................... 495 25.6 Colour Television Camera..................................................................................... 497 25.7 The Luminance Signal........................................................................................... 498 25.8 Values of Luminance (Y) and Colour Difference Signals on Colours................. 502 25.9 Polarity of the Colour Difference Signals............................................................. 503 25.10 Colour Television Display Tubes........................................................................... 505 25.11 Delta-Gun Colour Picture Tube............................................................................ 505 25.12 Purity and Convergence......................................................................................... 507 25.13 Precision-in-Line (P.I.L.) Colour Picture Tube.................................................... 510 25.14 The Deflection Unit................................................................................................ 513 25.15 Purity and Static Convergence Adjustments....................................................... 514 25.16 Dynamic Convergence Adjustments..................................................................... 516 25.17 Trintron Colour Picture Tube................................................................................ 519 25.18 Pincushion Correction Techniques....................................................................... 521 25.19 Automatic Degaussing (ADG) Circuit................................................................... 522 25.20 Grey Scale Tracking............................................................................................... 523 26. Colour Signal Transmission and Reception........................................................... 528 26.1 Colour Signal Transmission.................................................................................. 528 26.2 Bandwidth for Colour Signal Transmission......................................................... 530 26.3 Modulation of Colour Difference Signals.............................................................. 530 26.4 Weighting Factors.................................................................................................. 533 26.5 Formation of the Chrominance Signal................................................................. 535 26.6 NTSC Colour TV System....................................................................................... 537 26.7 NTSC Colour Receiver........................................................................................... 541 26.8 Limitations of the NTSC System.......................................................................... 544 26.9 PAL Colour Television System.............................................................................. 544 26.10 Cancellation of Phase Errors................................................................................. 546 26.11 PAL-D Colour System............................................................................................ 547 26.12 The PAL Coder....................................................................................................... 549 26.13 PAL-D Colour Receiver.......................................................................................... 551 26.14 Merits and Demerits of the PAL System.............................................................. 559 26.15 SECAM System...................................................................................................... 559 26.16 Merits and Demerits of SECAM Systems............................................................ 563 27. Remote Control and Special Circuits....................................................................... 566 27.1 Remote Control....................................................................................................... 566 27.2 Electromechanical Control System....................................................................... 569 http://fribok.blogspot.com/ 27.3 Electronic Control Systems................................................................................... 571 27.4 Electronic Touch Tuning........................................................................................ 573 27.5 Frequency Synthesizer TV Tuner......................................................................... 574 27.6 Automatic Fine Tuning (AFT)............................................................................... 575 27.7 Booster Amplifiers.................................................................................................. 578 27.8 Automatic Brightness Control............................................................................... 579 27.9 Instant-on Circuitry............................................................................................... 580 27.10 Picture-tube Boosters............................................................................................. 582 28. Alignment and Servicing Equipment....................................................................... 586 28.1 Multimeter.............................................................................................................. 586 28.2 Vacuum Tube Voltmeter (VTVM)......................................................................... 588 28.3 Digital Multimeters................................................................................................ 590 28.4 Cathode Ray Oscilloscope (CRO)........................................................................... 591 28.5 Video Pattern Generator........................................................................................ 599 28.6 Sweep Generator.................................................................................................... 601 28.7 Marker Generator.................................................................................................. 603 28.8 The Colour Bar Generator..................................................................................... 606 28.9 Vectroscope............................................................................................................. 611 28.10 High voltage Probe................................................................................................. 613 29. Receiver Circuits and Alignment.............................................................................. 616 29.1 Monochrome TV Receiver Circuit......................................................................... 616 29.2 Monochrome Receiver Alignment......................................................................... 618 29.3 Television Test Charts........................................................................................... 626 29.4 All IC Television Receivers.................................................................................... 628 29.5 Alignment of Colour Receivers.............................................................................. 630 30. Receiver Servicing........................................................................................................ 638 30.1 Trouble Shooting Procedure.................................................................................. 638 30.2 Trouble Shooting Monochrome Receivers............................................................ 641 30.3 Servicing of Various Functional Blocks................................................................ 644 30.4 Trouble Shooting Colour Receivers....................................................................... 663 30.5 Servicing Circuit Modules..................................................................................... 663 30.6 Safety Precautions in Televisions Servicing........................................................ 666 Appendices......................................................................................................................... 671 A. Conversion Factors and Prefixes...................................................................... 670 B. Transient Response and Wave Shaping.......................................................... 671 C. Television Broadcast Channels........................................................................ 679 D. Satellite Television............................................................................................ 681 Index................................................................................................................................. 685 http://fribok.blogspot.com/ Introduction http://fribok.blogspot.com/ Introduction Development of Television Television* means ‘to see from a distance’. The desire in man to do so has been there for ages. In the early years of the twentieth century many scientists experimented with the idea of using selenium photosensitive cells for converting light from pictures into electrical signals and transmitting them through wires. The first demonstration of actual television was given by J.L. Baird in UK and C.F. Jenkins in USA around 1927 by using the technique of mechanical scanning employing rotating discs. However, the real breakthrough occurred with the invention of the cathode ray tube and the success of V.K. Zworykin of the USA in perfecting the first camera tube (the iconoscope) based on the storage principle. By 1930 electromagnetic scanning of both camera and picture tubes and other ancillary circuits such as for beam deflection, video amplification, etc. were developed. Though television broadcast started in 1935, world political developments and the second world war slowed down the progress of television. With the end of the war, television rapidly grew into a popular medium for dispersion of news and mass entertainment. Television Systems At the outset, in the absence of any international standards, three monochrome (i.e. black and white) systems grew independently. These are the 525 line American, the 625 line European and the 819 line French systems. This naturally prevents direct exchange of programme between countries using different television standards. Later, efforts by the all world committee on radio and television (CCIR) for changing to a common 625 line system by all concerned proved ineffective and thus all the three systems have apparently come to stay. The inability to change over to a common system is mainly due to the high cost of replacing both the transmitting equipment and the millions of receivers already in use. However the UK, where initially a 415 line monochrome system was in use, has changed to the 625 line system with some modification in the channel bandwidth. In India, where television transmission started in 1959, the 625-B monochrome system has been adopted. The three different standards of black and white television have resulted in the development of three different systems of colour television, respectively compatible with the three monochrome systems. The original colour system was that adopted by the USA in 1953 on the recommendations of its National Television Systems Committee and hence called the NTSC system. The other two colour systems–PAL and SECAM are later modifications of the NTSC system, with minor improvements, to conform to the other two monochrome standards. *From the Greek tele (= far) and the Latin visionis (from videre = to see). http://fribok.blogspot.com/ 2 INTRODUCTION 3 Regular colour transmission started in the USA in 1954. In 1960, Japan adopted the NTSC system, followed by Canada and several other countries. The PAL colour system which is compatible with the 625 line monochrome European system, and is a variant of the NTSC system, was developed at the Telefunken Laboratories in the Federal Republic of Germany (FRG). This system incorporates certain features that tend to reduce colour display errors that occur in the NTSC system during transmission. The PAL system was adopted by FRG and UK in 1967. Subsequently Australia, Spain, Iran and several other countries in West and South Asia have opted for the PAL system. Since this system is compatible with the 625-B monochrome system, India also decided to adopt the PAL system. The third colour TV system in use is the SECAM system. This was initially developed and adopted in France in 1967. Later versions, known as SECAM IV and SECAM V were developed at the Russian National Institute of Research (NIR) and are sometimes referred to as the NIR-SECAM systems. This system has been adopted by the USSR, German Democratic Republic, Hungary, some other East European countries and Algeria. When both the quality of reproduction and the cost of equipment are taken into account, it is difficult to definitely establish the superiority of any one of these systems over the other two. All three systems have found acceptance in their respective countries. The deciding factor for adoption was compatibility with the already existing monochrome system. Applications of Television Impact of television is far and wide, and has opened new avenues in diverse fields like public entertainment, social education, mass communication, newscasts, weather reports, political organization and campaigns, announcements and guidance at public places like airport terminals, sales promotion and many others. Though the capital cost and operational expenses in the production and broadcasting of TV programmes are high compared to other media, its importance for mass communication and propagation of social objectives like education are well recognized and TV broadcasts are widely used for such purposes. Closed Circuit Television (CCTV) is a special application in which the camera signals are made available over cable circuits only to specified destinations. This has important applications where viewers need to see an area to which they may not go for reasons of safety or convenience. Group demonstrations of surgical operations or scientific experiments, inspection of noxious or dangerous industrial or scientific processes (e.g. nuclear fuel processing) or of underwater operations and surveillance of areas for security purposes are some typical examples. A special type of CCTV is what might be called wired community TV. Small communities that fall in the ‘shadow’ of tall geographical features like hills can jointly put up an antenna at a suitable altitude and distribute the programme to the subscribers’ premises through cable circuits. Another potential use of CCTV that can become popular and is already technically feasible is a video-telephone or ‘visiphone’. Equipment Television broadcasting requires a collection of sophisticated equipment, instruments and components that require well trained personnel. Television studios employ extensive lighting facilities, cameras, microphones, and control equipment. Transmitting equipment for http://fribok.blogspot.com/ 4 MONOCHROME AND COLOUR TELEVISION modulation, amplification and radiation of the signals at the high frequencies used for television broadcast are complex and expensive. A wide variety of support equipment essential in broadcast studios, control rooms and outside includes video tape recorders, telecine machines, special effects equipment plus all the apparatus for high quality sound broadcast. Coverage Most programmes are produced live in the studio but recorded on video tape at a convenient time to be broadcast later. Of course, provision for live broadcast also has to be there for VIP interviews, sports events and the like. For remote pick-ups the signal is relayed by cable or RF link to the studio for broadcasting in the assigned channel. Each television broadcast station is assigned a channel bandwidth of 7 MHz (6 MHz in the American, 8 MHz in the British and 14 MHz in the French systems). In the earlier days TV broadcast was confined to assigned VHF bands of 41 to 68 MHz and 174 to 230 MHz. Later additional channel allocations have been made in the UHF band between 470 and 890 MHz. Because of the use of VHF-UHF frequencies for television broadcast, reception of TV signals is limited to roughly the line of sight distance. This usually varies between 75 and 140 km depending on the topography and radiated power. Area of TV broadcast coverage can be extended by means of relay stations that rebroadcast signals received via microwave links or coaxial cables. A matrix of such relay stations can be used to provide complete national coverage. With the rapid strides made in the technology of space and satellite communication it has now become possible to have global coverage by linking national TV systems through satellites. Besides their use for international TV networks, large countries can use satellites for distributing national programmes over the whole area. One method for such national coverage is to set up a network of sensitive ground stations for receiving signals relayed by a satellite and retelecasting them to the surrounding area. Another method is to employ somewhat higher transmitter power on the satellite and receive the down transmissions directly through larger dish antenna on conventional television receivers fitted with an extra front-end converter. A combination of both the methods was successfully tested in India where NASA’s ATS-6 satellite was used for the SITE programme trials in 1975-76. This resulted in the launching of INSAT 1-A in April 1982. Recent Trends In the last decade, transistors and integrated circuits have greatly improved the quality of performance of TV broadcasting and reception. Modern camera tubes like vidicon and plumbicon have made TV broadcast of even dimly lit scenes possible. Special camera tubes are now used for different specific applications. The most sensitive camera tubes available today can produce usable signals even from the scenes where the human eye sees total darkness. With rapid advances in solid state technology, rugged solid state image scanners may conceivably replace the fragile camera tubes in the not-too-distant future. Experimental solid state cameras are already in use for some special applications. Solid state ‘picture-plates’ for use in receivers are under active development. Before long the highly vulnerable high vacuum glass envelope of the picture tube may be a thing of the past. Since solid state charge coupled devices are scanned by digital addressing, the camera scanner and picture plate can work in exact synchronism with no non-linear distortions of the reconstructed picture. An important recent technological advance is the use of pseudo-random scan. The signal so generated requires much less bandwidth than the one for conventional method of scanning. http://fribok.blogspot.com/ INTRODUCTION 5 Besides all this, wider use of composite devices, made by integrated solid state technology, for television studio and transmitter equipment as well as for receivers will result in higher quality of reproduction, lower costs and power consumptions with increased reliability and compactness. Special mention may be made of the surface acoustic wave filter to replace the clumsy and expensive IF transformer. Further, large screen TV reception systems based on projection techniques now under development will make it possible to show TV programmes to large audience as in a theatre. With the rapid development of large scale integrated (LSI) electronics in the last decade, digital communication by pulse code modulation (PCM) has made immense progress. The advantage gained is, that virtual freedom from all noise and interference is obtained by using a somewhat larger bandwidth and a specially coded signal. Even if the final transmission in TV is retained in its present form, so that all previous receivers remain usable, the processing of pictures from the camera to the transmitter input is likely to change over to PCM techniques. Unlike the case of monochrome TV standards, the International Telecommunication Union (ITU), a UN special agency, has already adopted a single set of standards accepted by all member countries for the production and processing of picture signals by digital methods. Digital TV has become all the more attractive since solid state cameras compatible with digital signal processing and deflection circuitry have also been developed and are at present in the field testing stage. http://fribok.blogspot.com/ 1 Elements of a Television System http://fribok.blogspot.com/ 1 Elements of a Television System The fundamental aim of a television system is to extend the sense of sight beyond its natural limits, along with the sound associated with the scene being televised. Essentially then, a TV system is an extension of the science of radio communication with the additional complexity that besides sound the picture details are also to be transmitted. In most television systems, as also in the C.C.I.R. 625 line monochrome system adopted by India, the picture signal is amplitude modulated and sound signal frequency modulated before transmission. The carrier frequencies are suitably spaced and the modulated outputs radiated through a common antenna. Thus each broadcasting station can have its own carrier frequency and the receiver can then be tuned to select any desired station. Figure 1.1 shows a simplified block representation of a TV transmitter and receiver. 1.1 PICTURE TRANSMISSION The picture information is optical in character and may be thought of as an assemblage of a large number of bright and dark areas representing picture details. These elementary areas into which the picture details may be broken up are known as ‘picture elements’, which when viewed together, represent the visual information of the scene. Thus the problem of picture transimission is fundamentally much more complex, because, at any instant there are almost an infinite number of pieces of information, existing simultaneously, each representing the level of brightness of the scene to the reproduced. In other words the information is a function of two variables, time and space. Ideally then, it would need an infinite number of channels to transmit optical information corresponding to all the picture elements simultaneously. Presently the practical difficulties of transmitting all the information simultaneously and decoding it at the receiving end seem insurmountable and so a method known as scanning is used instead. Here the conversion of optical information to electrical form and its transmission are carried out element by element, one at a time and in a sequential manner to cover the entire scene which is to be televised. Scanning of the elements is done at a very fast rate and this process is repeated a large number of times per second to create an illusion of simultaneous pick-up and transmission of picture details. A TV camera, the heart of which is a camera tube, is used to convert the optical information into a corresponding electrical signal, the amplitude of which varies in accordance with the variations of brightness. Fig. 1.2 (a) shows very elementary details of one type of camera tube (vidicon) to illustrate this principle. An optical image of the scene to be transmitted is focused by a lens assembly on the rectangular glass face-plate of the camera tube. The inner http://fribok.blogspot.com/ 8 ELEMENTS OF A TELEVISION SYSTEM 9 Crystal RF Power oscillator amplifier amplifier Transmitter antenna Scanning and synchronizing circuits Light Video AM Television modulating Combining camera amplifier amplifier network Microphone Audio FM FM amplifier modulating sound amplifier transmitter Fig. 1.1 (a) Basic monochrome television transmitter. Loudspeaker Sound FM Audio Receiver IF sound amplifier antenna amplifier demodulator Picture tube Common Video RF IF Video tuner detector amplifier amplifiers Light Scanning and synchronizing circuits Fig. 1.1 (b) Basic monochrome television receiver. Fig. 1.1 Simplified block diagram of a monochrome television broadcasting system. side of the glass face-plate has a transparent conductive coating on which is laid a very thin layer of photoconductive material. The photolayer has a very high resistance when no light falls on it, but decreases depending on the intensity of light falling on it. Thus depending on the light intensity variations in the focused optical image, the conductivity of each element of the photolayer changes accordingly. An electron beam is used to pick-up the picture information now available on the target plate in terms of varying resistance at each point. The beam is formed by an electron gun in the TV camera tube. On its way to the inner side of the glass face- plate it is deflected by a pair of deflecting coils mounted on the glass envelope and kept mutually perpendicular to each other to achieve scanning of the entire target area. Scanning is done in the same way as one reads a written page to cover all the words in one line and all the lines on the page (see Fig. 1.2 (b)). To achieve this the deflecting coils are fed separately from two sweep oscillators which continuously generate saw-tooth waveforms, each operating at a different desired frequency. The magnetic deflection caused by the current in one coil gives horizontal motion to the beam from left to right at a uniform rate and then brings it quickly to http://fribok.blogspot.com/ 10 MONOCHROME AND COLOUR TELEVISION the left side to commence the trace of next line. The other coil is used to deflect the beam from top to bottom at a uniform rate and for its quick retrace back to the top of the plate to start this process all over again. Two simultaneous motions are thus given to the beam, one from left to right across the target plate and the other from top to bottom thereby covering the entire area on which the electrical image of the picture is available. As the beam moves from element to element, it encounters a different resistance across the target-plate, depending on the resistance of the photoconductive coating. The result is a flow of current which varies in magnitude as the elements are scanned. This current passes through a load resistance RL, connected to the conductive coating on one side and to a dc supply source on the other. Depending on the magnitude of the current a varying voltage appears across the resistance RL and this corresponds to the optical information of the picture. Glass plate Conductive coating Focusing lens Photoconductive Cathode surface Light Electron beam Electron gun Object to be televised Video signal output Magnetic deflection and RL focusing coils Power supply Fig. 1.2 (a) Simplified cross-sectional view of a Vidicon TV camera tube. Top W dth Width Trace Retrace Height Bottom Fig. 1.2 (b) Path of scanning beam in covering picture area. http://fribok.blogspot.com/ ELEMENTS OF A TELEVISION SYSTEM 11 If the scanning beam moves at such a rate that any portion of the scene content does not have time to move perceptibly in the time required for one complete scan of the image, the resultant electrical signal contains the true information existing in the picture during the time of the scan. The desired information is now in the form of a signal varying with time and scanning may thus be identified as a particular process which permits the conversion of information existing in space and time coordinates into time variations only. The electrical information obtained from the TV camera tube is generally referred to as video signal (video is Latin for ‘see’). This signal is amplified and then amplitude modulated with the channel picture carrier frequency. The modulated output is fed to the transmitter antenna for radiation along with the sound signal. 1.2 SOUND TRANSMISSION The microphone converts the sound associated with the picture being televised into proportionate electrical signal, which is normally a voltage. This electrical output, regardless of the complexity of its waveform, is a single valued function of time and so needs a single channel for its transmission. The audio signal from the microphone after amplification is frequency modulated, employing the assigned carrier frequency. In FM, the amplitude of the carrier signal is held constant, whereas its frequency is varied in accordance with amplitude variations of the modulating signal. As shown in Fig. 1.1 (a), output of the sound FM transmitter is finally combined with the AM picture transmitter output, through a combining network, and fed to a common antenna for radiation of energy in the form of electromagnetic waves. 1.3 PICTURE RECEPTION The receiving antenna intercepts the radiated picture and sound carrier signals and feeds them to the RF tuner (see Fig. 1.1 (b)). The receiver is of the heterodyne type and employs two or three stages of intermediate frequency (IF) amplification. The output from the last IF stage Control grid Accelerating anode Cathode Focusing anode Final anode Heater Screen Electron beam Electron gun Phosphor Base coating Deflection coils EHT Fig. 1.3 Elements of a picture tube. http://fribok.blogspot.com/ 12 MONOCHROME AND COLOUR TELEVISION is demodulated to recover the video signal. This signal that carries the picture information is amplified and coupled to the picture tube which converts the electrical signal back into picture elements of the same degree of black and white. The picture tube shown in Fig. 1.3 is very similar to the cathode-ray tube used in an oscilloscope. The glass envelope contains an electron- gun structure that produces a beam of electrons aimed at the fluorescent screen. When the electron beam strikes the screen, light is emitted. The beam is deflected by a pair of deflecting coils mounted on the neck of the picture tube in the same way and rate as the beam scans the target in the camera tube. The amplitudes of the currents in the horizontal and vertical deflecting coils are so adjusted that the entire screen, called raster, gets illuminated because of the fast rate of scanning. The video signal is fed to the grid or cathode of the picture tube. When the varying signal voltage makes the control grid less negative, the beam current is increased, making the spot of light on the screen brighter. More negative grid voltage reduces the brightness. if the grid voltages is negative enough to cut-off the electron beam current at the picture tube there will be no light. This state corresponds to black. Thus the video signal illuminates the fluorescent screen from white to black through various shades of grey depending on its amplitude at any instant. This corresponds to the brightness changes encountered by the electron beam of the camera tube while scanning the picture details element by element. The rate at which the spot of light moves is so fast that the eye is unable to follow it and so a complete picture is seen because of the storage capability of the human eye. 1.4 SOUND RECEPTION The path of the sound signal is common with the picture signal from antenna to the video detector section of the receiver. Here the two signals are separated and fed to their respective channels. The frequency modulated audio signal is demodulated after at least one stage of amplification. The audio output from the FM detector is given due amplification before feeding it to the loudspeaker. 1.5 SYNCHRONIZATION It is essential that the same coordinates be scanned at any instant both at the camera tube target plate and at the raster of the picture tube, otherwise, the picture details would split and get distorted. To ensure perfect synchronization between the scene being televised and the picture produced on the raster, synchronizing pulses are transmitted during the retrace, i.e., fly-back intervals of horizontal and vertical motions of the camera scanning beam. Thus, in addition to carrying picture detail, the radiated signal at the transmitter also contains synchronizing pulses. These pulses which are distinct for horizontal and vertical motion control, are processed at the receiver and fed to the picture tube sweep circuitry thus ensuring that the receiver picture tube beam is in step with the transmitter camera tube beam. http://fribok.blogspot.com/ ELEMENTS OF A TELEVISION SYSTEM 13 1.6 RECEIVER CONTROLS The front view of a typical monochrome TV receiver, having various controls is shown in Fig. 1.4. The channel selector switch is used for selecting the desired channel. The fine tuning control is provided for obtaining best picture details in the selected channel. The hold control is used to get a steady picture in case it rolls up or down. The brightness control varies the beam intensity of the picture tube and is set for optimum average brightness of the picture. The contrast control is actually the gain control of the video amplifier. This can be varied to obtain the desired contrast between the white and black contents of the reproduced picture. The volume and tone controls form part of the audio amplifier in the sound section, and are used for setting the volume and tonal quality of the sound output from the loudspeaker. Vertical hold Channel selector Fine tuning Contrast Brightness Tone Volume and On - off Fig. 1.4 Television receiver controls 1.7 COLOUR TELEVISION Colour television is based on the theory of additive colour mixing, where all colours including white can be created by mixing red, green, and blue lights. The colour camera provides video signals for the red, green, and blue information. These are combined and transmitted along with the brightness (monochrome) signal. Each colour TV system* is compatible with the corresponding monochrome system. Compatibility means that colour broadcasts can be received as black and white on monochrome receivers. Conversely colour receivers are able to receive black and white TV broadcasts. This is illustrated in Fig. 1.5 where the transmission paths from the colour and monochrome cameras are shown to both colour and monochrome receivers. At the receiver, the three colour signals are separated and fed to the three electron guns of colour picture tube. The screen of the picture tube has red, green, and blue phosphors arranged in alternate dots. Each gun produces an electron beam to illuminate the three colour phosphors separately on the fluorescent screen. The eye then integrates the red, green and blue colour information and their luminance to perceive the actual colour and brightness of the picture being televised. * The three compatible colour television systems are NTSC, PAL and SECAM. http://fribok.blogspot.com/ 14 MONOCHROME AND COLOUR TELEVISION Colour Receiver Controls NTSC colour television receivers have two additional controls, known as Colour and Hue controls. These are provided at the front panel along with other controls. The colour or saturation control varies the intensity or amount of colour in the reproduced picture. For example, this control determines whether the leaves of a tree in the picture are dark green or light green, and whether the sky in the picture is dark blue or light blue. The tint or hue control selects the correct colour to be displayed. This is primarily used to set the correct skin colour, since when flesh tones are correct, all other colours are correctly reproduced. It may be noted that PAL colour receivers do not need any tint control while in SECAM colour receivers, both tint and saturation controls are not necessary. The reasons for such differences are explained in chapters exclusively devoted to colour television. Transmission Red, green and Optical filters Combining matrix path blue guns vR R1 R Red, green vG R2 R and blue Object G Colour G phosphors receiver B vB R3 B v Colour picture tube Colour camera R v = 0.3 vR + 0.59 vG + 0.11 vB Electron gun Phosphor screen Object Monochrome receiver Monochrome camera Black and white picture tube Fig. 1.5. Signal transmission paths illustrating compatibility between colour and monochrome TV systems. R, G and B represent three camera tubes which develop video signals corresponding to the red, green and blue contents of the scene being televised. Review Questions 1. Why is scanning necessary in TV transmission ? Why is it carried out at a fast rate ? 2. What is the basic principle of operation of a television camera tube ? 3. What is a raster and how is it produced on the picture tube screen ? 4. Why are synchronizing pulses transmitted along with the picture signal ? 5. Why is FM preferred to AM for sound signal transmission ? 6. Describe briefly the functions of various controls provided on the front panel of a TV receiver. 7. Describe the basic principle of colour television transmission and reception. 8. Describe the function of saturation and hue controls in a NTSC colour TV receiver. http://fribok.blogspot.com/ 2 Analysis and Synthesis of Television Pictures http://fribok.blogspot.com/ 2 Analysis and Synthesis of Television Pictures The basic factors with which the television system must deal for successful transmission and reception of pictures are: (a) Gross Structure: Geometric form and aspect ratio of the picture. (b) Image Continuity: Scanning and its sequence. (c) Number of Scanning Lines: Resolution of picture details. (d) Flicker: Interlaced scanning. (e) Fine Structure: Vertical and horizontal resolution. (f) Tonal Gradation: Picture brightness transfer characteristics of the system. 2.1 GROSS STRUCTURE The frame adopted in all television systems is rectangular with width/height ratio, i.e., aspect ratio = 4/3. There are many reasons for this choice. In human affairs most of the motion occurs in the horizontal plane and so a larger width is desirable. The eyes can view with more ease and comfort when the width of a picture is more than its height. The usage of rectangular frame in motion pictures with a width/height ratio of 4/3 is another important reason for adopting this shape and aspect ratio. This enables direct television transmission of film programmes without wastage of any film area. It is not necessary that the size of the picture produced on the receiver screen be same as that being televised but it is essential that the aspect ratio of the two be same, otherwise the scene details would look too thin or too wide. This is achieved by setting the magnitudes of the current in the deflection coils to correct values, both at the TV camera and receiving picture tube. Another important requirement is that the same coordinates should be scanned at any instant both by the camera tube beam and the picture tube beam in the receiver. Synchronizing pulses are transmitted along with the picture information to achieve exact congruence between transmitter and receiver scanning systems. 2.2 IMAGE CONTINUITY While televising picture elements of the frame by means of the scanning process, it is necessary to present the picture to the eye in such a way that an illusion of continuity is created and any 16 http://fribok.blogspot.com/ ANALYSIS AND SYNTHESIS OF TELEVISION PICTURES 17 motion in the scene appears on the picture tube screen as a smooth and continuous change. To achieve this, advantage is taken of ‘persistence of vision’ or storage characteristics of the human eye. This arises from the fact that the sensation produced when nerves of the eye’s retina are stimulated by incident light does not cease immediately after the light is removed but persists for about 1/16th of a second. Thus if the scanning rate per second is made greater than sixteen, or the number of pictures shown per second is more than sixteen, the eye is able to integrate the changing levels of brightness in the scene. So when the picture elements are scanned rapidly enough, they appear to the eye as a complete picture unit, with none of the individual elements visible separately. In present day motion pictures twenty-four still pictures of the scene are taken per second and later projected on the screen at the same rate. Each picture or frame is projected individually as a still picture, but they are shown one after the other in rapid succession to produce the illusion of continuous motion of the scene being shown. A shutter in the projector rotates in front of the light source and allows the film to be projected on the screen when the film frame is still, but blanks out any light from the screen during the time when the next film frame is being moved into position. As a result, a rapid succession of still-film frames is seen on the screen. With all light removed during the change from one frame to the next, the eye sees a rapid sequence of still pictures that provides the illusion of continuous motion. Scanning. A similar process is carried out in the television system. The scene is scanned rapidly both in the horizontal and vertical directions simultaneously to provide sufficient number of complete pictures or frames per second to give the illusion of continuous motion. Instead of the 24 as in commercial motion picture practice, the frame repetition rate is 25 per second in most television systems. Horizontal scanning. Fig. 2.1 (a) shows the trace and retrace of several horizontal lines. The linear rise of current in the horizontal deflection coils (Fig. 2.1 (b)) deflects the beam across the screen with a continuous, uniform motion for the trace from left to right. At the peak of the rise, the sawtooth wave reverses direction and decreases rapidly to its initial value. This fast reversal produces the retrace or flyback. The start of the horizontal trace is at the left W Start of a line End of a line Trace Retrace H Raster Fig. 2.1 (a) Path of scanning beam in covering picture area (Raster). http://fribok.blogspot.com/ 18 MONOCHROME AND COLOUR TELEVISION edge of raster. The finish is at the right edge, where the flyback produces retrace back to the left edge. i(H) i(H) max Retrace Raster of 625 lines Trace Right t Trace Retrace 1st line 2nd line 3rd line Left Trace period Retrace t c period One cycle of deflection current Fig. 2.1 (b) Waveform of current in the horizontal deflection coils producing linear (constant velocity) scanning in the horizontal direction. Note, that ‘up’ on the sawtooth wave corresponds to horizontal deflection to the right. The heavy lines in Fig. 2.1 (a) indicate the useful scanning time and the dashed lines correspond to the retrace time. Vertical scanning. The sawtooth current in the vertical deflection coils (see Fig. 2.2) moves the electron beam from top to bottom of the raster at a uniform speed while the electron beam is being deflected horizontally. Thus the beem produces complete horizontal lines one below the other while moving from top to bottom. As shown in Fig. 2.2 (c), the trace part of the sawtooth wave for vertical scanning deflects the beam to the bottom of the raster. Then the rapid vertical retrace returns the beam to the top. Note that the maximum amplitude of the vertical sweep current brings the beam to the bottom of the raster. As shown in Fig. 2.2 (b) during vertical retrace the horizontal scanning continues and several lines get scanned during this period. Because of motion in the scene being televised, the information or brightness at the top of the target plate or picture tube screen normally changes by the time the beam returns to the top to recommence the whole process. This information is picked up during the next scanning cycle and the whole process is repeated 25 times to cause an illusion of continuity. The actual scanning sequence is however a little more complex than that just described and is explained in a later section of this chapter. It must however be noted, that both during horizontal retrace and vertical retrace intervals the scanning beams at the camera tube and picture tube are blanked and no picture information is either picked up or reproduced. Instead, on a time division basis, these short retrace intervals are utilized for transmitting distinct narrow pulses to keep the sweep oscillators of the picture tube deflection circuits of the receiver in synchronism with those of the camera at the transmitter. This ensures exact correspondence in scanning at the two ends and results in distortionless reproduction of the picture details. http://fribok.blogspot.com/ ANALYSIS AND SYNTHESIS OF TELEVISION PICTURES 19 Top Linear Vertical vertical retrace trace Bottom (a) Trace (b) Retrace i(V) One cycle of vertical Trace period deflection current Top Bottom W i(V) max vertical Retrace trace Raster H t 1st fframe a e 2nd fframe a e Top Retrace period Bottom t (c) Current waveform in vertical deflection coils Fig. 2.2 Vertical deflection and deflection current waveform. 2.3 NUMBER OF SCANNING LINES Most scenes have brightness gradations in the vertical direction. The ability of the scanning beam to allow reproduction of electrical signals according to these variations and the capability of the human eye to resolve these distinctly, while viewing the reproduced picture, depends on the total number of lines employed for scanning. It is possible to arrive at some estimates of the number of lines necessary by considering the bar pattern shown in Fig. 2.3 (a), where alternate lines are black and white. If the thickness of the scanning beam is equal to the width of each white and black bar, and the number of scanning lines is chosen equal to the number of bars, the electrical information corresponding to the brightness of each bar will be correctly reproduced during the scanning process. Obviously the greater the number of lines into which the picture is divided in the vertical plane, the better will be the resolution.However, the total number of lines that need be employed is limited by the resolving capability of the human eye at the minimum viewing distance. Beam spot Dark White Beam path D W D W D W Fig. 2.3 (a) Scanning spot perfectly aligned with black and white lines. http://fribok.blogspot.com/ 20 MONOCHROME AND COLOUR TELEVISION Angle subtended at the eye n th bar by picture elements at critical (n + 1) th bar viewing distance (a) H Eye of the observer Two adjacent black picture D = 4H elements just resolved Fig. 2.3 (b) Critical viewing distance as determined by the ability of the eye to resolve two separate picture elements. Beam spot Adjacent black and white lines of resolution Beam path Fig. 2.3 (c) Scanning beam focused on the junction of black and white lines. The maximum number of alternate light and dark elements (lines) which can be resolved by the eye is given by 1 Nv = αρ where Nv = total number of lines (elements) to be resolved in the vertical direction, α = minimum resolving angle of the eye expressed in radians, and ρ = D/H = viewing-distance/picture height. For the eye this resolution is determined by the structure of the retina, and the brightness level of the picture. it has been determined experimently that with reasonable brightness variations and a minimum viewing distance of four times th

Monochrome and Colour Television (PDF)

Document Details

Tags

Related

Summary

Full Transcript

Upgrade to continue