Fundamentals of Electronic Communication System Quiz PDF
Document Details
Tags
Summary
This document contains a quiz on the fundamentals of electronic communication systems. It covers various topics such as analog vs. digital signals, signal degradation, different types of modulation, multiplexing methods, and examples of communication channels.
Full Transcript
Here are the answers to each question for your quiz on the Fundamentals of Electronic Communication System: 1. **Analog vs. Digital Signal:** - Analog signal: Continuous and varies smoothly over time. - Digital signal: Discrete and changes in steps or intervals, typically represented as b...
Here are the answers to each question for your quiz on the Fundamentals of Electronic Communication System: 1. **Analog vs. Digital Signal:** - Analog signal: Continuous and varies smoothly over time. - Digital signal: Discrete and changes in steps or intervals, typically represented as binary (0s and 1s). 2. **Signal degradation proportional to the square of the distance** – Free-space path loss. 3. **Decibels** – Noise power is measured in decibels (dB), which expresses the signal-to-noise ratio (SNR) as 10 * log(signal power/noise power). 4. **Ways to make the baseband signal change the carrier sine wave:** - Amplitude Modulation (AM) - Frequency Modulation (FM) - Phase Modulation (PM) 5. **Message in electronic communication system** – Information or signal. 6. **Range of electromagnetic signals encompassing all frequencies** – Electromagnetic spectrum. 7. **Long-distance communications invented in the 19th century** – Telegraph, Telephone, Radio. 8. **Modulation vs. Multiplexing:** - Modulation: Altering the properties of a carrier signal to transmit data. - Multiplexing: Combining multiple signals for transmission over a single communication channel. 9. **Components of a communication system:** - Transmitter - Medium/Channel - Receiver 10. **Government agencies responsible for spectrum management:** - Federal Communications Commission (FCC) - National Telecommunications Commission (NTC) - International Telecommunication Union (ITU) 11. **Most commonly used digital code in communications** – ASCII (American Standard Code for Information Interchange). 12. **Different light waves of the optical spectrum:** - Infrared (IR) - Visible light - Ultraviolet (UV) 13. **General term for phenomenon degrading transmitted information** – Noise. 14. **Basic types of multiplexing:** - Time Division Multiplexing (TDM) - Frequency Division Multiplexing (FDM) - Code Division Multiplexing (CDM) 15. **Long-distance communication methods used by early humans:** - Smoke signals - Fire beacons - Drums - Flags - Carrier pigeons 16. **Form of two-way communication where only one party transmits at a time** – Half-duplex. 17. **Number of times a phenomenon occurs in a given period** – Frequency. 18. **Specifications and guidelines for compatibility between equipment** – Standards. 19. **Collection of electronic components designed for transmission** – Transmitter. 20. **Organizations that maintain communication system standards:** - IEEE (Institute of Electrical and Electronics Engineers) - ITU (International Telecommunication Union) - ISO (International Organization for Standardization) 21. **Examples of communication channels:** - Optical fiber - Radio waves - Coaxial cable 22. **Transmitter and receiver at the same time** – Transceiver. 23. **General model of a communication system:** - Information source → Transmitter → Channel → Receiver → Destination (Draw this model in the exam). 24. **Range of FM radio broadcasting** – 88 MHz to 108 MHz. 25. **Baseband vs. Broadband:** - Baseband: Transmits a single signal over a channel, often over short distances. - Broadband: Transmits multiple signals simultaneously over long distances. 26. **Medium by which the signal is sent** – Communication channel. 27. **Process allowing multiple signals to share the same medium** – Multiplexing. 28. **Light signal with a narrow beam that can be modulated** – Laser. 29. **Electromagnetic spectrum:** (Draw the spectrum showing radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays in order). 30. **Portion of the electromagnetic spectrum occupied by a signal** – Bandwidth. 31. **Collection of components accepting and converting transmitted messages** – Receiver. 32. **Examples of transmitting digital data by modulation:** - ASK (Amplitude Shift Keying) - FSK (Frequency Shift Keying) 33. **Term describing equipment compatibility across manufacturers** – Interoperability. 34. **Process of exchanging information** – Communication. 35. **Common AC power line frequency range** – 50 Hz to 60 Hz. 36. **System using free space as a communication medium** – Wireless communication. 37. **Upper-frequency limit of a television signal occupying 6 MHz bandwidth (Channel 2 with 54 MHz lower limit):** - Upper limit = 54 MHz + 6 MHz = **60 MHz**. 38. **Frequency of an electromagnetic wave with 8-inch separation between peaks**: - Using \( f = \frac{c}{\lambda} \), where \( c \) is the speed of light and \( \lambda \) is the wavelength, the frequency is approximately **1.5 GHz**. 39. **Emphasis shifting from manufacturing to information exchange** – Information Age. 40. **Examples of communication channels:** - Fiber-optic cables - Satellite links - Twisted pair wires.