Biomolecules PDF

C HAPTER 9 B IOMOLECULES There is a wide diversity in living organisms in our biosphere. Now a question that arises in our minds is: Are all living organisms made of the same chemicals, i.e., elements and compounds? You have learnt in chemistry how elemental analysis is performed. If we perform...

C HAPTER 9 B IOMOLECULES There is a wide diversity in living organisms in our biosphere. Now a question that arises in our minds is: Are all living organisms made of the same chemicals, i.e., elements and compounds? You have learnt in chemistry how elemental analysis is performed. If we perform such an analysis on a plant tissue, animal tissue or a microbial paste, we obtain a list of elements like carbon, hydrogen, oxygen and several others and their respective content per unit mass of a living tissue. If the same analysis is performed on a piece of earth’s crust as an example of non-living matter, we obtain a similar list. What are the differences between the two lists? In absolute terms, no such differences could be made out. All the elements present in a sample of earth’s crust are also present in a sample of living tissue. However, a closer examination reveals that the relative abundance of carbon and hydrogen with respect to other elements is higher in any living organism than in earth’s crust (Table 9.1). 9.1 HO W TO ANALYSE CHEMICAL COMPOSITION? We can continue asking in the same way, what type of organic compounds are found in living organisms? How does one go about finding the answer? To get an answer, one has to perform a chemical analysis. We can take any living tissue (a vegetable or a piece of liver, etc.) and grind it in trichloroacetic acid (Cl3CCOOH) using a mortar and a pestle. We obtain a thick slurry. If we were to strain this through a cheesecloth or cotton we would obtain two fractions. One is called the filtrate or more technically, the acid-soluble pool, and the second, the retentate or the acid-insoluble fraction. Scientists have found thousands of organic compounds in the acid-soluble pool.  In higher classes you will learn about how TABLE 9.1 A Comparison of Elements Present to analyse a living tissue sample and identify a in Non-living and Living Matter* particular organic compound. It will suffice to Element % Weight of say here that one extracts the compounds, then Earth’s crust Human body subjects the extract to various separation Hydrogen (H) 0.14 0.5 techniques till one has separated a compound Carbon (C) 0.03 18.5 from all other compounds. In other words, one Oxygen (O) 46.6 65.0 Nitrogen (N) very little 3.3 isolates and purifies a compound. Analytical Sulphur (S) 0.03 0.3 techniques, when applied to the compound give Sodium (Na) 2.8 0.2 us an idea of the molecular formula and the Calcium (Ca) 3.6 1.5 probable structure of the compound. All the Magnesium (Mg) 2.1 0.1 carbon compounds that we get from living Silicon (Si) 27.7 negligible tissues can be called ‘biomolecules’. However, * Adapted from CNR Rao, Understanding Chemistry, Universities Press, Hyderabad. living organisms have also got inorganic elements and compounds in them. How do we know this? A slightly different but destructive experiment has to be done. One weighs a small amount of a living tissue (say a leaf or liver and this is called wet weight) and dry it. All the water, evaporates. The remaining material gives dry TABLE 9.2 A List of Representative Inorganic weight. Now if the tissue is fully burnt, all the Constituents of Living Tissues carbon compounds are oxidised to gaseous Component Formula form (CO2, water vapour) and are removed. What is remaining is called ‘ash’. This ash contains Sodium Na+ inorganic elements (like calcium, magnesium Potassium K+ etc). Inorganic compounds like sulphate, Calcium Ca++ phosphate, etc., are also seen in the acid-soluble Magnesium Mg++ fraction. Therefore elemental analysis gives Water H2O elemental composition of living tissues in the Compounds NaCl, CaCO3, form of hydrogen, oxygen, chlorine, carbon etc. PO34 − , SO24 − while analysis for compounds gives an idea of the kind of organic (Figure 9.1) and inorganic constituents (Table 9.2) present in living tissues. From a chemistry point of view, one can identify functional groups like aldehydes, ketones, aromatic compounds, etc. But from a biological point of view, we shall classify them into amino acids, nucleotide bases, fatty acids etc. Amino acids are organic compounds containing an amino group and an acidic group as substituents on the same carbon i.e., the α-carbon. Hence, they are called α-amino acids. They are substituted methanes. There are four substituent groups occupying the four valency positions. These are hydrogen, carboxyl group, amino group and a variable group designated as R group. Based on the nature of R group there are many amino acids. However, those which occur in proteins are only of twenty types. The R group in these proteinaceous amino acids could be a hydrogen (the amino acid is called glycine), a methyl group (alanine), hydroxy methyl (serine), etc. Three of the twenty are shown in Figure 9.1. The chemical and physical properties of amino acids are essentially of the amino, carboxyl and the R functional groups. Based on number of amino and carboxyl groups, there are acidic (e.g., glutamic acid), basic (lysine) and neutral (valine) amino acids. Similarly, there are aromatic amino acids (tyrosine, phenylalanine, tryptophan). A particular property of amino acids is the ionizable nature of –NH2 and –COOH groups. Hence in solutions of different pH, the structure of amino acids changes. B is called zwitterionic form. Lipids are generally water insoluble. They could be simple fatty acids. A fatty acid has a carboxyl group attached to an R group. The R group could be a methyl (–CH3), or ethyl (–C2H5) or higher number of –CH2 groups (1 carbon to 19 carbons). For example, palmitic acid has 16 carbons including carboxyl carbon. Arachidonic acid has 20 carbon atoms including the carboxyl carbon. Fatty acids could be saturated (without double bond) or unsaturated (with one or more C=C double bonds). Another simple lipid is glycerol which is trihydroxy propane. Many lipids have both glycerol and fatty acids. Here the fatty acids are found esterified with glycerol. They can be then monoglycerides, diglycerides and triglycerides. These are also called fats and oils based on melting point. Oils have lower melting point (e.g., gingelly oil) and hence remain as oil in winters. Can you identify a fat from the market? Some lipids have phosphorous and a phosphorylated organic compound in them. These are phospholipids. They are found in cell membrane. Lecithin is one example. Some tissues especially the neural tissues have lipids with more complex structures. Living organisms have a number of carbon compounds in which heterocyclic rings can be found. Some of these are nitrogen bases – adenine, guanine, cytosine, uracil, and thymine. When found attached to a sugar, they are called nucleosides. If a phosphate group is also found esterified to the sugar they are called nucleotides. Adenosine, guanosine, thymidine, uridine and cytidine are nucleosides. Adenylic acid, thymidylic acid, guanylic acid, uridylic acid and cytidylic acid are nucleotides. Nucleic acids like DNA and RNA consist of nucleotides only. DNA and RNA function as genetic material.  CH2OH HOCH2 O O OH HO OH OH OH OH OH Glycine Alanine Serine C6H12O6 (Glucose) C5H10O5 (Ribose) Amino acids Sugars (Carbohydrates) CH3 (CH2)14 COOH Fatty acid (Palmitic acid) Glycerol Triglyceride (R1, R2 and R3 are fatty acids) Phospholipid (Lecithin) Cholesterol Fats and oils (lipids) HOCH2 O Adenine O O Adenine HO P OCH2 OH OH OH Adenine (Purine) Adenosine O HOCH2 O Uracil OH OH HN Adenylic acid O N H OH OH Uracil (Pyrimidine) Uridine Nitrogen bases Nucleosides Nucleotide Figure 9.1 Diagrammatic representation of small molecular weight organic compounds in living tissues  9.2 PRIMARY AND SECONDARY METABOLITES The most exciting aspect of chemistry deals with isolating thousands of compounds, small and big, from living organisms, determining their structure and if possible synthesising them. If one were to make a list of biomolecules, such a list would have thousands of organic compounds including amino acids, sugars, etc. For reasons that are given in section 9.10, we can call these biomolecules as ‘metabolites’. In animal tissues, one notices the presence of all such categories of compounds shown in Figure 9.1. These are called primary metabolites. However, when one analyses plant, fungal and microbial cells, one would see thousands of compounds other than these called primary metabolites, e.g. alkaloids, flavonoids, rubber, essential oils, antibiotics, coloured pigments, scents, gums, spices. These TABLE 9.3 Some Secondary Metabolites are called secondary metabolites (Table 9.3). Pigments Carotenoids, Anthocyanins, While primary metabolites have identifiable etc. functions and play known roles in normal Alkaloids Morphine, Codeine, etc. physiologial processes, we do not at the moment, Terpenoides Monoterpenes, Diterpenes etc. understand the role or functions of all the Essential oils Lemon grass oil, etc. ‘secondary metabolites’ in host organisms. Toxins Abrin, Ricin However, many of them are useful to ‘human Lectins Concanavalin A welfare’ (e.g., rubber, drugs, spices, scents and Drugs Vinblastin, curcumin, etc. pigments). Some secondary metabolites have Polymeric Rubber, gums, cellulose ecological importance. In the later chapters and substances years you will learn more about this. 9.3 B IOMACROMOLECULES There is one feature common to all those compounds found in the acid soluble pool. They have molecular weights ranging from 18 to around 800 daltons (Da) approximately. The acid insoluble fraction, has only four types of organic compounds i.e., proteins, nucleic acids, polysaccharides and lipids. These classes of compounds with the exception of lipids, have molecular weights in the range of ten thousand daltons and above. For this very reason, biomolecules, i.e., chemical compounds found in living organisms are of two types. One, those which have molecular weights less than one thousand dalton and are usually referred to as micromolecules or simply biomolecules while those which are found in the acid insoluble fraction are called macromolecules or biomacromolecules. The molecules in the insoluble fraction with the exception of lipids are polymeric substances. Then why do lipids, whose molecular weights do not exceed 800 Da, come under acid insoluble fraction, i.e., macromolecular fraction? Lipids are indeed small molecular weight compounds and are present not only as such but also arranged into structures like cell membrane and other membranes. When we grind a tissue, we are disrupting the cell structure. Cell membrane and other membranes are broken into pieces, and form vesicles which are not water soluble. Therefore, these membrane fragments in the form of vesicles get separated along with the acid insoluble pool and hence in the macromolecular fraction. Lipids are not strictly macromolecules. The acid soluble pool represents roughly the cytoplasmic composition. The macromolecules from TABLE 9.4 Average Composition of Cells cytoplasm and organelles become the acid insoluble fraction. Together they represent the entire chemical Component % of the total composition of living tissues or organisms. cellular mass In summary if we represent the chemical Water 70-90 composition of living tissue from abundance point of Proteins 10-15 view and arrange them class-wise, we observe that Carbohydrates 3 water is the most abundant chemical in living Lipids 2 organisms (Table 9.4). Nucleic acids 5-7 Ions 1 9.4 PROTEINS Proteins are polypeptides. They are linear chains of amino acids linked by peptide bonds as shown in Figure 9.3. Each protein is a polymer of amino acids. As there are 20 types of amino acids (e.g., alanine, cysteine, proline, tryptophan, lysine, etc.), a protein is a heteropolymer and not a homopolymer. A TABLE 9.5 Some Proteins and their Functions homopolymer has only one type of monomer repeating ‘n’ number of times. This information about the amino Protein Functions acid content is important as later in your nutrition Collagen Intercellular ground lessons, you will learn that certain amino acids are substance essential for our health and they have to be supplied Trypsin Enzyme through our diet. Hence, dietary proteins are the Insulin Hormone source of essential amino acids. Therefore, amino acids Antibody Fights infectious agents can be essential or non-essential. The latter are those Receptor Sensory reception which our body can make, while we get essential amino (smell, taste, hormone, acids through our diet/food. Proteins carry out many etc.) functions in living organisms, some transport GLUT-4 Enables glucose nutrients across cell membrane, some fight infectious transport organisms, some are hormones, some are enzymes, into cells  etc. (Table 9.5). Collagen is the most abundant protein in animal world and Ribulose bisphosphate Carboxylase-Oxygenase (RuBisCO) is the most abundant protein in the whole of the biosphere. 9.5 POLYSACCHARIDES The acid insoluble pellet also has polysaccharides (carbohydrates) as another class of macromolecules. Polysaccharides are long chains of sugars. They are threads (literally a cotton thread) containing different monosaccharides as building blocks. For example, cellulose is a polymeric polysaccharide consisting of only one type of monosaccharide i.e., glucose. Cellulose is a homopolymer. Starch is a variant of this but present as a store house of energy in plant tissues. Animals have another variant called glycogen. Inulin is a polymer of fructose. In a polysaccharide chain (say glycogen), the right end is called the reducing end and the left end is called the non-reducing end. It has branches as shown in the form of a cartoon (Figure 9.2). Starch forms helical secondary structures. In fact, starch can hold I2 molecules in the helical portion. The starch-I2 is blue in colour. Cellulose does not contain complex helices and hence cannot hold I2. CH2OH CH2OH O O O O OH OH O O OH O O OH OH CH2 O O O O O Figure 9.2 Diagrammatic representation of a portion of glycogen  Plant cell walls are made of cellulose. Paper made from plant pulp and cotton fibre is cellulosic. There are more complex polysaccharides in nature. They have as building blocks, amino-sugars and chemically modified sugars (e.g., glucosamine, N-acetyl galactosamine, etc.). Exoskeletons of arthropods, for example, have a complex polysaccharide called chitin. These complex polysaccharides are mostly homopolymers. 9.6 N UCLEIC ACIDS The other type of macromolecule that one would find in the acid insoluble fraction of any living tissue is the nucleic acid. These are polynucleotides. Together with polysaccharides and polypeptides these comprise the true macromolecular fraction of any living tissue or cell. For nucleic acids, the building block is a nucleotide. A nucleotide has three chemically distinct components. One is a heterocyclic compound, the second is a monosaccharide and the third a phosphoric acid or phosphate. As you notice in Figure 9.1, the heterocyclic compounds in nucleic acids are the nitrogenous bases named adenine, guanine, uracil, cytosine, and thymine. Adenine and Guanine are substituted purines while the rest are substituted pyrimidines. The skeletal heterocyclic ring is called as purine and pyrimidine respectively. The sugar found in polynucleotides is either ribose (a monosaccharide pentose) or 2’ deoxyribose. A nucleic acid containing deoxyribose is called deoxyribonucleic acid (DNA) while that which contains ribose is called ribonucleic acid (RNA). 9.7 S TRUCTURE OF PROTEINS Proteins, as mentioned earlier, are heteropolymers containing strings of amino acids. Structure of molecules means different things in different contexts. In inorganic chemistry, the structure invariably refers to the molecular formulae (e.g., NaCl, MgCl2, etc.). Organic chemists always write a two dimensional view of the molecules while representing the structure of the molecules (e.g., benzene, naphthalene, etc.). Physicists conjure up the three dimensional views of molecular structures while biologists describe the protein structure at four levels. The sequence of amino acids i.e., the positional information in a protein – which is the first amino acid, which is second, and so on – is called the primary structure (Figure 9.3 a) of a protein. A protein is imagined as a line, the left end represented by the first amino acid and the right end represented by the last amino  acid. The first amino acid is also (a) Primary called as N-terminal amino acid. The Polypeptide last amino acid is called the C- terminal amino acid. A protein thread does not exist throughout as an extended rigid rod. The thread is (b) Secondary folded in the form of a helix (similar to a revolving staircase). Of course, only some portions of the protein thread are arranged in the form of a Alpha – Helix Beta– plated sheet helix. In proteins, only right handed helices are observed. Other regions of the protein thread are folded into (c) Hydrogen other forms in what is called the Tertiary Disulphide bond secondary structure (Fig. 9.3 b). In addition, the long protein chain is also folded upon itself like a hollow woolen ball, giving rise to the tertiary structure (Fig. 9.3 c). This (d) Quaternary gives us a 3-dimensional view of a protein. Tertiary structure is absolutely necessary for the many biological activities of proteins. Figure 9.3 Various levels of Protein Structure Some proteins are an assembly of more than one polypeptide or subunits. The manner in which these individual folded polypeptides or subunits are arranged with respect to each other (e.g. linear string of spheres, spheres arranged one upon each other in the form of a cube or plate etc.) is the architecture of a protein otherwise called the quaternary structure of a protein (Fig. 9.3 d). Adult human haemoglobin consists of 4 subunits. Two of these are identical to each other. Hence, two subunits of α type and two subunits of β type together constitute the human haemoglobin (Hb). 9.8 ENZYMES Almost all enzymes are proteins. There are some nucleic acids that behave like enzymes. These are called ribozymes. One can depict an enzyme by a line diagram. An enzyme like any protein has a primary structure, i.e., amino acid sequence of the protein. An enzyme like any protein has the secondary and the tertiary structure. When you look at a tertiary structure (Figure 9.3 d) you will notice that the backbone of the protein chain folds upon itself, the chain criss-crosses itself and hence, many crevices or pockets are made. One such pocket is the ‘active site’. An active site of an enzyme is a crevice or pocket into which the substrate fits. Thus enzymes, through their active site, catalyse reactions at a high rate. Enzyme catalysts differ from inorganic catalysts in many ways, but one major difference needs mention. Inorganic catalysts work efficiently at high temperatures and high pressures, while enzymes get damaged at high temperatures (say above 40°C). However, enzymes isolated from organisms who normally live under extremely high temperatures (e.g., hot vents and sulphur springs), are stable and retain their catalytic power even at high temperatures (upto 80°-90°C). Thermal stability is thus an important quality of such enzymes isolated from thermophilic organisms. 9.8.1 Chemical Reactions How do we understand these enzymes? Let us first understand a chemical reaction. Chemical compounds undergo two types of changes. A physical change simply refers to a change in shape without breaking of bonds. This is a physical process. Another physical process is a change in state of matter: when ice melts into water, or when water becomes a vapour. These are also physical processes. However, when bonds are broken and new bonds are formed during transformation, this will be called a chemical reaction. For example: Ba(OH)2 + H2SO4 → BaSO4 + 2H2O is an inorganic chemical reaction. Similarly, hydrolysis of starch into glucose is an organic chemical reaction. Rate of a physical or chemical process refers to the amount of product formed per unit time. It can be expressed as: δP rate = δt Rate can also be called velocity if the direction is specified. Rates of physical and chemical processes are influenced by temperature among other factors. A general rule of thumb is that rate doubles or decreases by half for every 10°C change in either direction. Catalysed reactions proceed at rates vastly higher than that of uncatalysed ones. When enzyme catalysed reactions are observed, the rate would be vastly higher than the same but uncatalysed reaction. For example Carbonic anhydrase CO2 + H2O  → H CO3  2 ← carbon dioxide water carbonic acid  In the absence of any enzyme this reaction is very slow, with about 200 molecules of H2CO3 being formed in an hour. However, by using the enzyme present within the cytoplasm called carbonic anhydrase, the reaction speeds dramatically with about 600,000 molecules being formed every second. The enzyme has accelerated the reaction rate by about 10 million times. The power of enzymes is incredible indeed! There are thousands of types of enzymes each catalysing a unique chemical or metabolic reaction. A multistep chemical reaction, when each of the steps is catalysed by the same enzyme complex or different enzymes, is called a metabolic pathway. For example, Glucose → 2 Pyruvic acid C6H12O6 + O2 → 2C3H4 O3 + 2H2O is actually a metabolic pathway in which glucose becomes pyruvic acid through ten different enzyme catalysed metabolic reactions. When you study respiration in Chapter 12 you will study these reactions. At this stage you should know that this very metabolic pathway with one or two additional reactions gives rise to a variety of metabolic end products. In our skeletal muscle, under anaerobic conditions, lactic acid is formed. Under normal aerobic conditions, pyruvic acid is formed. In yeast, during fermentation, the same pathway leads to the production of ethanol (alcohol). Hence, in different conditions different products are possible. 9.8.2 How do Enzymes bring about such High Rates of Chemical Conversions? To understand this we should study enzymes a little more. We have already understood the idea of an ‘active site’. The chemical or metabolic conversion refers to a reaction. The chemical which is converted into a product is called a ‘substrate’. Hence enzymes, i.e. proteins with three dimensional structures including an ‘active site’, convert a substrate (S) into a product (P). Symbolically, this can be depicted as: S →P It is now understood that the substrate ‘S’ has to bind the enzyme at its ‘active site’ within a given cleft or pocket. The substrate has to diffuse towards the ‘active site’. There is thus, an obligatory formation of an ‘ES’ complex. E stands for enzyme. This complex formation is a transient phenomenon. During the state where substrate is bound to the enzyme active site, a new structure of the substrate called transition state structure is formed. Very soon, after the expected bond breaking/making is completed, the product is released from the active site. In other words, the structure of substrate gets transformed into the structure of product(s). The pathway of this transformation must go through the so-called transition state structure. There could be many Transition state more ‘altered structural states’ between the stable substrate and the product. Implicit in this Activation energy statement is the fact that all other intermediate without enzyme Potential Energy structural states are unstable. Stability is something related to energy status of the Activation molecule or the structure. Hence, when we look energy with enzyme at this pictorially through a graph it looks like Substrate (s) something as in Figure 9.4. The y-axis represents the potential energy content. The x-axis represents the progression of the structural transformation or states through the ‘transition state’. You would notice two things. The energy level difference between Product (P) S and P. If ‘P’ is at a lower level than ‘S’, the reaction Progress of reaction is an exothermic reaction. One need not supply Figure 9.4 Concept of activation energy energy (by heating) in order to form the product. However, whether it is an exothermic or spontaneous reaction or an endothermic or energy requiring reaction, the ‘S’ has to go through a much higher energy state or transition state. The difference in average energy content of ‘S’ from that of this transition state is called ‘activation energy’. Enzymes eventually bring down this energy barrier making the transition of ‘S’ to ‘P’ more easy. 9.8.3 Nature of Enzyme Action Each enzyme (E) has a substrate (S) binding site in its molecule so that a highly reactive enzyme-substrate complex (ES) is produced. This complex is short-lived and dissociates into its product(s) P and the unchanged enzyme with an intermediate formation of the enzyme-product complex (EP). The formation of the ES complex is essential for catalysis. E+S ES → EP → E + P The catalytic cycle of an enzyme action can be described in the following steps: 1. First, the substrate binds to the active site of the enzyme, fitting into the active site. 2. The binding of the substrate induces the enzyme to alter its shape, fitting more tightly around the substrate. 3. The active site of the enzyme, now in close proximity of the substrate breaks the chemical bonds of the substrate and the new enzyme- product complex is formed.  4. The enzyme releases the products of the reaction and the free enzyme is ready to bind to another molecule of the substrate and run through the catalytic cycle once again. 9.8.4 Factors Affecting Enzyme Activity The activity of an enzyme can be affected by a change in the conditions which can alter the tertiary structure of the protein. These include temperature, pH, change in substrate concentration or binding of specific chemicals that regulate its activity. Temperature and pH Enzymes generally function in a narrow range of temperature and pH (Figure 9.5). Each enzyme shows its highest activity at a particular temperature and pH called the optimum temperature and optimum pH. Activity declines both below and above the optimum value. Low temperature preserves the enzyme in a temporarily inactive state whereas high temperature destroys enzymatic activity because proteins are denatured by heat. Concentration of Substrate With the increase in substrate concentration, the velocity of the enzymatic reaction rises at first. The reaction ultimately reaches a maximum velocity (Vmax) which is not exceeded by any further rise in concentration of the substrate. This is because the enzyme molecules are fewer than the substrate molecules and after saturation of these molecules, there are no free enzyme molecules to bind with the additional substrate molecules (Figure 9.5). The activity of an enzyme is also sensitive to the presence of specific chemicals that bind to the enzyme. When the binding of the chemical Vmax (a) (b) (c) Velocity of reaction (V) Enzyme activity Vmax 2 pH Temperature Km [S] Figure 9.5 Effect of change in : (a) pH (b) Temperature and (c) Concentration of substrate on enzyme activity shuts off enzyme activity, the process is called inhibition and the chemical is called an inhibitor. When the inhibitor closely resembles the substrate in its molecular structure and inhibits the activity of the enzyme, it is known as competitive inhibitor. Due to its close structural similarity with the substrate, the inhibitor competes with the substrate for the substrate- binding site of the enzyme. Consequently, the substrate cannot bind and as a result, the enzyme action declines, e.g., inhibition of succinic dehydrogenase by malonate which closely resembles the substrate succinate in structure. Such competitive inhibitors are often used in the control of bacterial pathogens. 9.8.5 Classification and Nomenclature of Enzymes Thousands of enzymes have been discovered, isolated and studied. Most of these enzymes have been classified into different groups based on the type of reactions they catalyse. Enzymes are divided into 6 classes each with 4-13 subclasses and named accordingly by a four-digit number. Oxidoreductases/dehydrogenases: Enzymes which catalyse oxidoreduction between two substrates S and S’ e.g., S reduced + S’ oxidised → S oxidised + S’ reduced. Transferases: Enzymes catalysing a transfer of a group, G (other than hydrogen) between a pair of substrate S and S’ e.g., S - G + S’ → S + S’ - G Hydrolases: Enzymes catalysing hydrolysis of ester, ether, peptide, glycosidic, C-C, C-halide or P-N bonds. Lyases: Enzymes that catalyse removal of groups from substrates by mechanisms other than hydrolysis leaving double bonds. Isomerases: Includes all enzymes catalysing inter-conversion of optical, geometric or positional isomers. Ligases: Enzymes catalysing the linking together of 2 compounds, e.g., enzymes which catalyse joining of C-O, C-S, C-N, P-O etc. bonds. 9.8.6 Co-factors Enzymes are composed of one or several polypeptide chains. However, there are a number of cases in which non-protein constituents called co- factors are bound to the the enzyme to make the enzyme catalytically  active. In these instances, the protein portion of the enzymes is called the apoenzyme. Three kinds of cofactors may be identified: prosthetic groups, co-enzymes and metal ions. Prosthetic groups are organic compounds and are distinguished from other cofactors in that they are tightly bound to the apoenzyme. For example, in peroxidase and catalase, which catalyze the breakdown of hydrogen peroxide to water and oxygen, haem is the prosthetic group and it is a part of the active site of the enzyme. Co-enzymes are also organic compounds but their association with the apoenzyme is only transient, usually occurring during the course of catalysis. Furthermore, co-enzymes serve as co-factors in a number of different enzyme catalyzed reactions. The essential chemical components of many coenzymes are vitamins, e.g., coenzyme nicotinamide adenine dinucleotide (NAD) and NADP contain the vitamin niacin. A number of enzymes require metal ions for their activity which form coordination bonds with side chains at the active site and at the same time form one or more cordination bonds with the substrate, e.g., zinc is a cofactor for the proteolytic enzyme carboxypeptidase. Catalytic activity is lost when the co-factor is removed from the enzyme which testifies that they play a crucial role in the catalytic activity of the enzyme. S UMMARY Although there is a bewildering diversity of living organisms, their chemical composition and metabolic reactions appear to be remarkably similar. The elemental composition of living tissues and non-living matter appear also to be similar when analysed qualitatively. However, a closer examination reveals that the relative abundance of carbon, hydrogen and oxygen is higher in living systems when compared to inanimate matter. The most abundant chemical in living organisms is water. There are thousands of small molecular weight (