Interior Design Process Fundamentals PDF

The Design Process ID Fundamentals The Design Process Pre-design Interview Not a match Great match! Stop Proceed to Find new...

The Design Process ID Fundamentals The Design Process Pre-design Interview Not a match Great match! Stop Proceed to Find new Phase 1 designer pre-design – in the beginning Designer interviews the client and asks questions to understand client’s needs. If the designer’s skills match and the client agrees, a contract is either signed and the formal interior design process may begin or the designer and client part ways. The Design Process Interview Phase 1 Great match! Phase 1: Programming: Identify client’s situation & needs step one – programming: client consultation During the programming phase the client's needs and objectives are identified. Questions regarding the specific function(s) of the space, who will be using the space and furniture and equipment requirements will be discussed. Measurements and photos are also taken at this time. The Design Process Phase 2 Phase 1: Programming: Identify client’s situation & needs Phase 2: Schematic Design step two - schematic design In the schematic design phase, space planning and furniture layouts are developed. Circulation patterns and minimum clearances are considered and applied to the floor plan. Rough sketches and elevations are created, preliminary furniture and finish ideas are developed and then presented to the client for review and revision. The Design Process Phase 1: Programming: Phase 3 Phase 2: Schematic Design Phase 3: Design Development step three - design development After final approval of the schematic design, the designer develops floor plans, elevations and other related items in greater detail. Colors and finishes are refined, furniture, fabrics and equipment are selected and cost estimates are prepared. The resulting design is presented to the client for review, revision and final approval. The Design Process Phase 1: Programming: Phase 4 Phase 2: Schematic Design Phase 4: Phase 3: Contract Documents Design Development step four - construction documentation In the first phase, the specific details of the work to be completed are documented. These details include millwork specification, finish selections such as flooring and paint, lighting plans and fixture selection, plumbing location and fixture selection, and electrical layouts in regard to the total scope of work to be completed. In the second phase, bids are obtained, contractors selected, and purchase orders are issued.  Phase 1: Programming: Phase 2: Schematic Design The Design Process Phase 5 Phase 5: Contract Administration Phase 3: Design Development Phase 4: Contract Documents step five - construction administration This is the final stage where things are built and installed. The designer is often onsite during "installation" to ensure items are received in good condition, installed correctly, and that documents have been followed properly.  Phase 1: Programming: Phase 2: Schematic Design Phase 6: Move-in & post The Design Process occupancy Phase 6 Phase 3: Design Development Phase 5: Contract Administration Phase 4: Contract Documents step six - move in and post occupancy Lastly, the client schedules a move in date. Clients are also asked to evaluate the design process. Final Thoughts In the Interior Design and Interior Architecture professions, this process is invaluable as a tool. Rather than the final project reflecting the taste and considerations of the designer, it should reflect the real solutions to client needs, reflecting their sense of style as interpreted by the designer. This process should help the designer as they create solutions because they are based on the needs of an individual or family and not merely on the designer’s vision for a room. The constant feedback and iterations ensure the client is involved in each part of design and construction and the solutions address real needs.