Motion in a Straight Line PDF - Chapter 2 - Kinematics

CHAPTER TWO MOTION IN A STRAIGHT LINE 2.1 INTRODUCTION Motion is common to everything in the universe. We walk, run and ride a bicycle. Even when we are sle...

CHAPTER TWO MOTION IN A STRAIGHT LINE 2.1 INTRODUCTION Motion is common to everything in the universe. We walk, run and ride a bicycle. Even when we are sleeping, air moves 2.1 Introduction into and out of our lungs and blood flows in arteries and 2.2 Instantaneous velocity and veins. We see leaves falling from trees and water flowing speed down a dam. Automobiles and planes carry people from one 2.3 Acceleration place to the other. The earth rotates once every twenty-four 2.4 Kinematic equations for hours and revolves round the sun once in a year. The sun uniformly accelerated motion itself is in motion in the Milky Way, which is again moving 2.5 Relative velocity within its local group of galaxies. Summary Motion is change in position of an object with time. How Points to ponder does the position change with time ? In this chapter, we shall Exercises learn how to describe motion. For this, we develop the concepts of velocity and acceleration. We shall confine ourselves to the study of motion of objects along a straight line, also known as rectilinear motion. For the case of rectilinear motion with uniform acceleration, a set of simple equations can be obtained. Finally, to understand the relative nature of motion, we introduce the concept of relative velocity. In our discussions, we shall treat the objects in motion as point objects. This approximation is valid so far as the size of the object is much smaller than the distance it moves in a reasonable duration of time. In a good number of situations in real-life, the size of objects can be neglected and they can be considered as point-like objects without much error. In Kinematics, we study ways to describe motion without going into the causes of motion. What causes motion described in this chapter and the next chapter forms the subject matter of Chapter 4. 2024-25 14 PHYSICS 2.2 INSTANTANEOUS VELOCITY AND SPEED The average velocity tells us how fast an object has been moving over a given time interval but does not tell us how fast it moves at different instants of time during that interval. For this, we define instantaneous velocity or simply velocity v at an instant t. The velocity at an instant is defined as the limit of the average velocity as the time interval ∆t becomes infinitesimally small. In other words, ∆x v = lim (2.1a) ∆t → 0 ∆t Fig. 2.1 Determining velocity from position-time dx (2.1b) graph. Velocity at t = 4 s is the slope of the = dt tangent to the graph at that instant. lim where the symbol ∆t →0 stands for the operation Now, we decrease the value of ∆t from 2 s to 1 of taking limit as ∆tg0 of the quantity on its s. Then line P1P2 becomes Q1Q2 and its slope right. In the language of calculus, the quantity gives the value of the average velocity over on the right hand side of Eq. (2.1a) is the the interval 3.5 s to 4.5 s. In the limit ∆t → 0, differential coefficient of x with respect to t and the line P1P2 becomes tangent to the position- dx time curve at the point P and the velocity at t is denoted by (see Appendix 2.1). It is the dt = 4 s is given by the slope of the tangent at rate of change of position with respect to time, that point. It is difficult to show this at that instant. process graphically. But if we use numerical method to obtain the value of We can use Eq. (2.1a) for obtaining the the velocity, the meaning of the limiting value of velocity at an instant either process becomes clear. For the graph shown graphically or numerically. Suppose that we in Fig. 2.1, x = 0.08 t3. Table 2.1 gives the want to obtain graphically the value of value of ∆x/∆t calculated for ∆t equal to 2.0 s, velocity at time t = 4 s (point P) for the motion 1.0 s, 0.5 s, 0.1 s and 0.01 s centred at t = of the car represented in Fig.2.1 calculation. 4.0 s. The second and third columns give the Let us take ∆t = 2 s centred at t = 4 s. Then, by the definition of the average velocity, the  ∆t   ∆t  value of t1=  t −  and t 2 =  t +  and the slope of line P1P2 ( Fig. 2.1) gives the value of  2   2  average velocity over the interval 3 s to 5 s. fourth and the fifth columns give the ∆x Table 2.1 Limiting value of at t = 4 s ∆t 2024-25 MOTION IN A STRAIGHT LINE 15 a + 16b – a – 4b = = 6.0 × b 3 corresponding values of x, i.e. x (t1) = 0.08 t1 2.0 and x (t2) = 0.08 t 23. The sixth column lists the = 6.0 × 2.5 = 15 m s-1 ⊳ difference ∆x = x (t 2) – x (t1 ) and the last column gives the ratio of ∆x and ∆t, i.e. the Note that for uniform motion, velocity is average velocity corresponding to the value the same as the average velocity at all of ∆t listed in the first column. instants. We see from Table 2.1 that as we decrease Instantaneous speed or simply speed is the the value of ∆t from 2.0 s to 0.010 s, the value of magnitude of velocity. For example, a velocity of the average velocity approaches the limiting + 24.0 m s–1 and a velocity of – 24.0 m s–1 — value 3.84 m s–1 which is the value of velocity at both have an associated speed of 24.0 m s-1. It dx should be noted that though average speed over t = 4.0 s, i.e. the value of at t = 4.0 s. In this a finite interval of time is greater or equal to the dt magnitude of the average velocity, manner, we can calculate velocity at each instantaneous speed at an instant is equal to instant for motion of the car. the magnitude of the instantaneous velocity at The graphical method for the determination that instant. Why so ? of the instantaneous velocity is always not a convenient method. For this, we must carefully 2.3 ACCELERATION plot the position–time graph and calculate the The velocity of an object, in general, changes value of average velocity as ∆t becomes smaller during its course of motion. How to describe and smaller. It is easier to calculate the value this change? Should it be described as the rate of velocity at different instants if we have data of change in velocity with distance or with of positions at different instants or exact time ? This was a problem even in Galileo’s expression for the position as a function of time. time. It was first thought that this change could Then, we calculate ∆x/∆t from the data for be described by the rate of change of velocity decreasing the value of ∆t and find the limiting with distance. But, through his studies of value as we have done in Table 2.1 or use motion of freely falling objects and motion of differential calculus for the given expression and objects on an inclined plane, Galileo concluded that the rate of change of velocity with time is dx calculate at different instants as done in a constant of motion for all objects in free fall. dt On the other hand, the change in velocity with the following example. distance is not constant – it decreases with the ⊳ increasing distance of fall. This led to the Example 2.1 The position of an object concept of acceleration as the rate of change moving along x-axis is given by x = a + bt2 of velocity with time. where a = 8.5 m, b = 2.5 m s–2 and t is The average acceleration a over a time interval measured in seconds. What is its velocity at is defined as the change of velocity divided by t = 0 s and t = 2.0 s. What is the average the time interval : velocity between t = 2.0 s and t = 4.0 s ? Answer In notation of differential calculus, the a = v 2 – v1 = ∆v (2.2) velocity is t 2 – t1 ∆t where v2 and v1 are the instantaneous velocities v= dx = dt dt d ( ) a + bt 2 = 2b t = 5.0 t m s -1 or simply velocities at time t2 and t1. It is the average change of velocity per unit time. The SI At t = 0 s, v = 0 m s–1 and at t = 2.0 s, -1 unit of acceleration is m s–2. v = 10 m s. On a plot of velocity versus time, the average acceleration is the slope of the straight line x ( 4.0 ) − x (2.0 ) Average velocity = connecting the points corresponding to (v2, t2) 4.0 − 2.0 and (v1, t1). 2024-25 16 PHYSICS Instantaneous acceleration is defined in the (c) An object is moving in negative direction same way as the instantaneous velocity : with a negative acceleration. ∆v dv (d) An object is moving in positive direction a = lim = (2.3) till time t1, and then turns back with the ∆t →0∆t dt same negative acceleration. The acceleration at an instant is the slope of the tangent to the v–t curve at that An interesting feature of a velocity-time instant. graph for any moving object is that the area Since velocity is a quantity having both under the curve represents the magnitude and direction, a change in displacement over a given time interval. A velocity may involve either or both of these general proof of this statement requires use of factors. Acceleration, therefore, may result calculus. We can, however, see that it is true from a change in speed (magnitude), a for the simple case of an object moving with change in direction or changes in both. Like constant velocity u. Its velocity-time graph is velocity, acceleration can also be positive, as shown in Fig. 2.4. negative or zero. Position-time graphs for motion with positive, negative and zero acceleration are shown in Figs. 2.4 (a), (b) and (c), respectively. Note that the graph curves upward for positive acceleration; downward for negative acceleration and it is a straight line for zero acceleration. Although acceleration can vary with time, our study in this chapter will be restricted to motion with constant acceleration. In this case, the average acceleration equals the constant value of acceleration during the interval. If the velocity of an object is v o at t = 0 and v at time t, we have v − v0 a= or, v = v0 + a t (2.4) t −0 Fig. 2.3 Velocity–time graph for motions with Fig. 2.2 Position-time graph for motion with constant acceleration. (a) Motion in positive (a) positive acceleration; (b) negative direction with positive acceleration, acceleration, and (c) zero acceleration. (b) Motion in positive direction with Let us see how velocity-time graph looks like negative acceleration, (c) Motion in for some simple cases. Fig. 2.3 shows velocity- negative direction with negative time graph for motion with constant acceleration acceleration, (d) Motion of an object with negative acceleration that changes for the following cases : direction at time t1. Between times 0 to (a) An object is moving in a positive direction t1, it moves in positive x - direction with a positive acceleration. and between t1 and t2 it moves in the (b) An object is moving in positive direction opposite direction. with a negative acceleration. 2024-25 MOTION IN A STRAIGHT LINE 17 Fig. 2.4 Area under v–t curve equals displacement of the object over a given time interval. The v-t curve is a straight line parallel to the time axis and the area under it between t = 0 and t = T is the area of the rectangle of height u and base T. Therefore, area = u × T = uT which Fig. 2.5 Area under v-t curve for an object with is the displacement in this time interval. How uniform acceleration. come in this case an area is equal to a distance? Think! Note the dimensions of quantities on the two coordinate axes, and you will arrive at As explained in the previous section, the area the answer. under v-t curve represents the displacement. Therefore, the displacement x of the object is : Note that the x-t, v-t, and a-t graphs shown in several figures in this chapter have sharp 1 kinks at some points implying that the x = 2 (v –v 0 ) t + v 0 t (2.5) functions are not differentiable at these But v − v0 = a t points. In any realistic situation, the functions will be differentiable at all points 1 and the graphs will be smooth. Therefore, x = a t 2 + v 0t 2 What this means physically is that 1 or, x = v0t + at 2 (2.6) acceleration and velocity cannot change 2 values abruptly at an instant. Changes are Equation (2.5) can also be written as always continuous. v + v0 2.4 KINEMATIC EQU ATIONS FOR x= t = vt (2.7a) 2 UNIFORMLY ACCELERATED MOTION where, For uniformly accelerated motion, we can derive some simple equations that relate displacement v + v0 (x), time taken (t), initial velocity (v 0), final v= (constant acceleration only) 2 velocity (v) and acceleration (a). Equation (2.4) (2.7b) already obtained gives a relation between final and initial velocities v and v0 of an object moving Equations (2.7a) and (2.7b) mean that the object with uniform acceleration a : has undergone displacement x with an average velocity equal to the arithmetic average of the v = v0 + at (2.4) initial and final velocities. From Eq. (2.4), t = (v – v0)/a. Substituting this in This relation is graphically represented in Fig. 2.5. Eq. (2.7a), we get The area under this curve is :  v + v0   v − v 0  v − v 0 2 2 Area between instants 0 and t = Area of triangle x =vt = = ABC + Area of rectangle OACD  2   a  2a 1 = 2 (v –v0 ) t + v0t v 2 = v02 + 2ax (2.8) 2024-25 18 PHYSICS This equation can also be obtained by ∫ 0 (v0 + at ) dt t substituting the value of t from Eq. (2.4) into Eq. = (2.6). Thus, we have obtained three important equations : 1 x – x 0 = v0 t + a t2 v = v0 + at 2 1 1 x = x 0 + v0 t + a t2 x = v 0t + at 2 2 2 We can write v 2 = v02 + 2ax (2.9a) a= dv dv dx = =v dv dt dx dt dx connecting five quantities v0, v, a, t and x. These are kinematic equations of rectilinear motion for or, v dv = a dx constant acceleration. Integrating both sides, The set of Eq. (2.9a) were obtained by v x assuming that at t = 0, the position of the particle, ∫v 0 v dv = ∫x 0 a dx x is 0. We can obtain a more general equation if v 2 – v 02 we take the position coordinate at t = 0 as non- = a (x – x 0 ) zero, say x0. Then Eqs. (2.9a) are modified 2 (replacing x by x – x0 ) to : v 2 = v02 + 2a ( x – x 0 ) v = v0 + at The advantage of this method is that it can be used 1 for motion with non-uniform acceleration x = x 0 + v 0t + at 2 (2.9b) also. 2 Now, we shall use these equations to some v 2 = v 02 + 2a ( x − x 0 ) (2.9c) important cases. ⊳ ⊳ ⊳ Example 2.3 A ball is thrown vertically Example 2.2 Obtain equations of motion upwards with a velocity of 20 m s–1 from for constant acceleration using method of the top of a multistorey building. The calculus. height of the point from where the ball is thrown is 25.0 m from the ground. (a) How Answer By definition high will the ball rise ? and (b) how long will it be before the ball hits the ground? dv Take g = 10 m s–2. a = dt dv = a dt Answer (a) Let us take the y-axis in the Integrating both sides v t vertically upward direction with zero at the ∫v 0 dv = ∫ 0a dt ground, as shown in Fig. 2.6. Now vo = + 20 m s–1, t = a ∫ dt (a is a = – g = –10 m s–2, 0 v = 0 m s–1 constant) If the ball rises to height y from the point of v – v 0 = at launch, then using the equation v = v 0 + at ( v 2 = v02 + 2 a y – y 0 ) we get dx Further, v= 0 = (20)2 + 2(–10)(y – y0) dt Solving, we get, (y – y0) = 20 m. dx = v dt Integrating both sides (b) We can solve this part of the problem in two x t ways. Note carefully the methods used. ∫x 0 dx = ∫ 0 v dt 2024-25 MOTION IN A STRAIGHT LINE 19 0 = 25 +20 t + (½) (-10) t2 Or, 5t2 – 20t – 25 = 0 Solving this quadratic equation for t, we get t = 5s Note that the second method is better since we do not have to worry about the path of the motion as the motion is under constant acceleration. ⊳ ⊳ Example 2.4 Free-fall : Discuss the motion of an object under free fall. Neglect air resistance. Answer An object released near the surface of the Earth is accelerated downward under the influence of the force of gravity. The magnitude of acceleration due to gravity is represented by g. If air resistance is neglected, the object is Fig. 2.6 said to be in free fall. If the height through which the object falls is small compared to the FIRST METHOD : In the first method, we split earth’s radius, g can be taken to be constant, the path in two parts : the upward motion (A to equal to 9.8 m s–2. Free fall is thus a case of B) and the downward motion (B to C) and motion with uniform acceleration. calculate the corresponding time taken t1 and We assume that the motion is in y-direction, t2. Since the velocity at B is zero, we have : more correctly in –y-direction because we v = vo + at choose upward direction as positive. Since the 0 = 20 – 10t1 acceleration due to gravity is always downward, Or, t1 = 2 s it is in the negative direction and we have This is the time in going from A to B. From B, or a = – g = – 9.8 m s–2 the point of the maximum height, the ball falls The object is released from rest at y = 0. Therefore, freely under the acceleration due to gravity. The v0 = 0 and the equations of motion become: ball is moving in negative y direction. We use equation v= 0–gt = –9.8 t m s–1 2 2 y = 0 – ½ g t = –4.9 t m 1 2 y = y0 + v 0t + at v2 = 0 – 2 g y = –19.6 y m2 s–2 2 These equations give the velocity and the We have, y0 = 45 m, y = 0, v0 = 0, a = – g = –10 m s–2 distance travelled as a function of time and also 0 = 45 + (½) (–10) t22 the variation of velocity with distance. The Solving, we get t2 = 3 s variation of acceleration, velocity, and distance, Therefore, the total time taken by the ball before with time have been plotted in Fig. 2.7(a), (b) it hits the ground = t1 + t2 = 2 s + 3 s = 5 s. and (c). SECOND METHOD : The total time taken can also be calculated by noting the coordinates of initial and final positions of the ball with respect to the origin chosen and using equation 1 2 y = y0 + v 0t + at 2 Now y0 = 25 m y=0m vo = 20 m s-1, a = –10m s–2, t = ? (a) 2024-25 20 PHYSICS traversed during successive intervals of time. Since initial velocity is zero, we have 1 2 y=− gt 2 Using this equation, we can calculate the position of the object after different time intervals, 0, τ, 2τ, 3τ… which are given in second column of Table 2.2. If we take (–1/ 2) gτ2 as y0 — the position coordinate after first time interval τ, then third column gives (b) the positions in the unit of yo. The fourth column gives the distances traversed in successive τs. We find that the distances are in the simple ratio 1: 3: 5: 7: 9: 11… as shown in the last column. This law was established by Galileo Galilei (1564-1642) who was the first to make quantitative studies of free fall. ⊳ Example 2.6 Stopping distance of ⊳ vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is (c) an important factor for road safety and depends on the initial velocity (v0) and the Fig. 2.7 Motion of an object under free fall. (a) Variation of acceleration with time. braking capacity, or deceleration, –a that (b) Variation of velocity with time. is caused by the braking. Derive an (c) Variation of distance with time ⊳ expression for stopping distance of a vehicle in terms of vo and a. ⊳ Example 2.5 Galileo’s law of odd Answer Let the distance travelled by the vehicle numbers : “The distances traversed, during before it stops be ds. Then, using equation of equal intervals of time, by a body falling motion v2 = vo2 + 2 ax, and noting that v = 0, we from rest, stand to one another in the same have the stopping distance ratio as the odd numbers beginning with unity [namely, 1: 3: 5: 7…...].” Prove it. – v02 ds = Answer Let us divide the time interval of 2a motion of an object under free fall into many Thus, the stopping distance is proportional to equal intervals τ and find out the distances the square of the initial velocity. Doubling the Table 2.2 2024-25 MOTION IN A STRAIGHT LINE 21 initial velocity increases the stopping distance by a factor of 4 (for the same deceleration). For the car of a particular make, the braking distance was found to be 10 m, 20 m, 34 m and 50 m corresponding to velocities of 11, 15, 20 and 25 m/s which are nearly consistent with the above formula. Stopping distance is an important factor considered in setting speed limits, for example, in school zones. ⊳ ⊳ Example 2.7 Reaction time : When a situation demands our immediate action, it takes some time before we really respond. Reaction time is the time a person takes to observe, think and act. For example, if a person is Fig. 2.8 Measuring the reaction time. driving and suddenly a boy appears on the road, then the time elapsed before Answer The ruler drops under free fall. he slams the brakes of the car is the Therefore, vo = 0, and a = – g = –9.8 m s–2. The reaction time. Reaction time depends distance travelled d and the reaction time tr are on complexity of the situation and on related by an individual. You can measure your reaction time by a simple experiment. Take a ruler and ask your friend to drop it vertically through the gap between Or, your thumb and forefinger (Fig. 2.8). Given d = 21.0 cm and g = 9.8 m s–2 the reaction After you catch it, find the distance d time is travelled by the ruler. In a particular case, d was found to be 21.0 cm. ⊳ Estimate reaction time. SUMMARY 1. An object is said to be in motion if its position changes with time. The position of the object can be specified with reference to a conveniently chosen origin. For motion in a straight line, position to the right of the origin is taken as positive and to the left as negative. The average speed of an object is greater or equal to the magnitude of the average velocity over a given time interval. 2. Instantaneous velocity or simply velocity is defined as the limit of the average velocity as the time interval ∆t becomes infinitesimally small : ∆ x dx v = lim v = lim = ∆t → 0 ∆t → 0 ∆t dt The velocity at a particular instant is equal to the slope of the tangent drawn on position-time graph at that instant. 2024-25 22 PHYSICS 3. Average acceleration is the change in velocity divided by the time interval during which the change occurs : ∆v a= ∆t 4. Instantaneous acceleration is defined as the limit of the average acceleration as the time interval ∆t goes to zero : ∆v dv a = lim a = lim = ∆t → 0 ∆t →0 ∆t dt The acceleration of an object at a particular time is the slope of the velocity-time graph at that instant of time. For uniform motion, acceleration is zero and the x-t graph is a straight line inclined to the time axis and the v-t graph is a straight line parallel to the time axis. For motion with uniform acceleration, x-t graph is a parabola while the v-t graph is a straight line inclined to the time axis. 5. The area under the velocity-time curve between times t1 and t2 is equal to the displacement of the object during that interval of time. 6. For objects in uniformly accelerated rectilinear motion, the five quantities, displacement x, time taken t, initial velocity v0, final velocity v and acceleration a are related by a set of simple equations called kinematic equations of motion : v = v0 + at 1 2 x = v0 t + at 2 2 2 v = v0 + 2ax if the position of the object at time t = 0 is 0. If the particle starts at x = x0 , x in above equations is replaced by (x – x0). 2024-25 MOTION IN A STRAIGHT LINE 23 POINTS TO PONDER 1. The origin and the positive direction of an axis are a matter of choice. You should first specify this choice before you assign signs to quantities like displacement, velocity and acceleration. 2. If a particle is speeding up, acceleration is in the direction of velocity; if its speed is decreasing, acceleration is in the direction opposite to that of the velocity. This statement is independent of the choice of the origin and the axis. 3. The sign of acceleration does not tell us whether the particle’s speed is increasing or decreasing. The sign of acceleration (as mentioned in point 3) depends on the choice of the positive direction of the axis. For example, if the vertically upward direction is chosen to be the positive direction of the axis, the acceleration due to gravity is negative. If a particle is falling under gravity, this acceleration, though negative, results in increase in speed. For a particle thrown upward, the same negative acceleration (of gravity) results in decrease in speed. 4. The zero velocity of a particle at any instant does not necessarily imply zero acceleration at that instant. A particle may be momentarily at rest and yet have non-zero acceleration. For example, a particle thrown up has zero velocity at its uppermost point but the acceleration at that instant continues to be the acceleration due to gravity. 5. In the kinematic equations of motion [Eq. (2.9)], the various quantities are algebraic, i.e. they may be positive or negative. The equations are applicable in all situations (for one dimensional motion with constant acceleration) provided the values of different quantities are substituted in the equations with proper signs. 6. The definitions of instantaneous velocity and acceleration (Eqs. (2.1) and (2.3)) are exact and are always correct while the kinematic equations (Eq. (2.9)) are true only for motion in which the magnitude and the direction of acceleration are constant during the course of motion. 2024-25 24 PHYSICS EXERCISES 2.1 In which of the following examples of motion, can the body be considered approximately a point object: (a) a railway carriage moving without jerks between two stations. (b) a monkey sitting on top of a man cycling smoothly on a circular track. (c) a spinning cricket ball that turns sharply on hitting the ground. (d) a tumbling beaker that has slipped off the edge of a table. 2.2 The position-time (x-t) graphs for two children A and B returning from their school O to their homes P and Q respectively are shown in Fig. 2.9. Choose the correct entries in the brackets below ; (a) (A/B) lives closer to the school than (B/A) (b) (A/B) starts from the school earlier than (B/A) (c) (A/B) walks faster than (B/A) (d) A and B reach home at the (same/different) time (e) (A/B) overtakes (B/A) on the road (once/twice). Fig. 2.9 2.3 A woman starts from her home at 9.00 am, walks with a speed of 5 km h–1 on a straight road up to her office 2.5 km away, stays at the office up to 5.00 pm, and returns home by an auto with a speed of 25 km h–1. Choose suitable scales and plot the x-t graph of her motion. 2.4 A drunkard walking in a narrow lane takes 5 steps forward and 3 steps backward, followed again by 5 steps forward and 3 steps backward, and so on. Each step is 1 m long and requires 1 s. Plot the x-t graph of his motion. Determine graphically and otherwise how long the drunkard takes to fall in a pit 13 m away from the start. 2.5 A car moving along a straight highway with speed of 126 km h–1 is brought to a stop within a distance of 200 m. What is the retardation of the car (assumed uniform), and how long does it take for the car to stop ? 2.6 A player throws a ball upwards with an initial speed of 29.4 m s–1. (a) What is the direction of acceleration during the upward motion of the ball ? (b) What are the velocity and acceleration of the ball at the highest point of its motion ? (c) Choose the x = 0 m and t = 0 s to be the location and time of the ball at its highest point, vertically downward direction to be the positive direction of x-axis, and give the signs of position, velocity and acceleration of the ball during its upward, and downward motion. (d) To what height does the ball rise and after how long does the ball return to the player’s hands ? (Take g = 9.8 m s–2 and neglect air resistance). 2.7 Read each statement below carefully and state with reasons and examples, if it is true or false ; A particle in one-dimensional motion (a) with zero speed at an instant may have non-zero acceleration at that instant (b) with zero speed may have non-zero velocity, (c) with constant speed must have zero acceleration, (d) with positive value of acceleration must be speeding up. 2024-25 MOTION IN A STRAIGHT LINE 25 2.8 A ball is dropped from a height of 90 m on a floor. At each collision with the floor, the ball loses one tenth of its speed. Plot the speed-time graph of its motion between t = 0 to 12 s. 2.9 Explain clearly, with examples, the distinction between : (a) magnitude of displacement (sometimes called distance) over an interval of time, and the total length of path covered by a particle over the same interval; (b) magnitude of average velocity over an interval of time, and the average speed over the same interval. [Average speed of a particle over an interval of time is defined as the total path length divided by the time interval]. Show in both (a) and (b) that the second quantity is either greater than or equal to the first. When is the equality sign true ? [For simplicity, consider one-dimensional motion only]. 2.10 A man walks on a straight road from his home to a market 2.5 km away with a speed of 5 km h–1. Finding the market closed, he instantly turns and walks back home with a speed of 7.5 km h–1. What is the (a) magnitude of average velocity, and (b) average speed of the man over the interval of time (i) 0 to 30 min, (ii) 0 to 50 min, (iii) 0 to 40 min ? [Note: You will appreciate from this exercise why it is better to define average speed as total path length divided by time, and not as magnitude of average velocity. You would not like to tell the tired man on his return home that his average speed was zero !] Fig. 2.10 2.11 In Exercises 2.9 and 2.10, we have carefully distinguished between average speed and magnitude of average velocity. No such distinction is necessary when we consider instantaneous speed and magnitude of velocity. The instantaneous speed is always equal to the magnitude of instantaneous velocity. Why? 2.12 Look at the graphs (a) to (d) (Fig. 2.10) carefully and state, with reasons, which of these cannot possibly represent one-dimensional motion of a particle. 2.13 Figure 2.11shows the x-t plot of one- dimensional motion of a particle. Is it correct to say from the graph that the particle moves Fig. 2.11 in a straight line for t < 0 and on a parabolic path for t >0 ? If not, suggest a suitable physical context for this graph. 2.14 A police van moving on a highway with a speed of 30 km h–1 fires a bullet at a thief’s car speeding away in the same direction with a speed of 192 km h–1. If the muzzle speed of the bullet is 150 m s–1, with what speed does the bullet hit the thief’s car ? (Note: Obtain that speed which is relevant for damaging the thief’s car). 2024-25 26 PHYSICS 2.15 Suggest a suitable physical situation for each of the following graphs (Fig 2.12): Fig. 2.12 2.16 Figure 2.13 gives the x-t plot of a particle executing one-dimensional simple harmonic motion. (You will learn about this motion in more detail in Chapter13). Give the signs of position, velocity and acceleration variables of the particle at t = 0.3 s, 1.2 s, – 1.2 s. Fig. 2.13 2.17 Figure 2.14 gives the x-t plot of a particle in one-dimensional motion. Three different equal intervals of time are shown. In which interval is the average speed greatest, and in which is it the least ? Give the sign of average velocity for each interval. Fig. 2.14 2.18 Figure 2.15 gives a speed-time graph of a particle in motion along a constant direction. Three equal intervals of time are shown. In which interval is the average acceleration greatest in magnitude? In which interval is the average speed greatest ? Choosing the positive direction as the constant direction of motion, give the signs of v and a in the three intervals. What are the accelerations at the points A, B, C and D ? Fig. 2.15 2024-25