19 Transport Layer Protocols.pdf

Transport Layer Protocols TCP/UDP Overview Process-to-Process Communication Transport-layer protocol provides process-to-process communication. A process is an application-layer entity (running program) that uses the services of the transport layer. Host-to-host communication vs. process-to-process...

Transport Layer Protocols TCP/UDP Overview Process-to-Process Communication Transport-layer protocol provides process-to-process communication. A process is an application-layer entity (running program) that uses the services of the transport layer. Host-to-host communication vs. process-to-process communication Transport Layer Role and Services Major functions of the transport layer and the role it plays in data networks Transport Layer Role and Services Transport Layer Role and Services Summary Sample Question One of the responsibilities of the transport layer protocol is to create a ______ communication. A) host-to-host C) node-to-node B) process-to-process D) none of the above Transport Layer Requirements Addressing: Port Numbers Port address/number - in TCP/IP protocol, an integer identifying a process; Port numbers are integers between 0 and 65,535. TCP/IP has decided to use universal port numbers for servers; called well-known port numbers. Port Numbers Internet Corporation for Assigned Names and Numbers (ICANN) has divided the port numbers into three ranges: well-known, registered, and dynamic (or private). Socket address: combination of an IP address and a port number. Example Encapsulation and Decapsulation To send a message from one process to another, the transport layer protocol encapsulates and decapsulates messages. Multiplexing and Demultiplexing Multiplexing (many to one)an entity accepts items from more than one source. Demultiplexing (one to many) – an entity delivers items to more than one source. Flow Control at Transport Layer In communication at the transport layer, we are dealing with four entities: sender process, sender transport layer, receiver transport layer, and receiver process. Error Control We need to make the transport layer reliable if required by the application. 1. Detect and discard corrupted packets. 2. Keep track of lost and discarded packets and resend them. 3. Recognize duplicate packets and discard them. 4. Buffer out-of-order packets until the missing packets arrive. Connectionless vs. ConnectionOriented Service Connectionless service: Connectionless vs. ConnectionOriented Service Connectionless service: Connectionoriented service Simple Protocol A connectionless protocol that provides neither flow nor error control. FSMs Two transport layer protocols in the Internet Transmission Control Protocol (TCP) – “ a connection-oriented, end-to-end reliable protocol designed to fit into a layered hierarchy of protocols which support multi-network applications.” - RFC793 User Datagram Protocol (UDP) – “ a minimal protocol mechanism w/c is transaction oriented, and delivery and duplicate protection are not guaranteed”. –RFC768 Understand User Datagram Protocol (UDP) A connectionless, unreliable transport protocol. UDP is an example of the connectionless simple protocol with the exception of an optional checksum added to packets for error detection. User Datagram Protocol (UDP) User Datagram Protocol (UDP) UDP packets, called user datagrams, have a fixed-size header of 8 bytes. User Datagram Protocol (UDP) Source port number. This is the port number used by the process running on the source host. It is 16 bits long, which means that the port number can range from 0 to 65,535. Destination port number. This is the port number used by the process running on the destination host. It is also 16 bits long. Length. This is a 16-bit field that defines the total length of the user datagram, header plus data. UDP length = IP length − IP header’s length Checksum. This field is used to detect errors over the entire user datagram. Example The following is a dump of a UDP header in hexadecimal format. CB84000D001C001C a. What is the source port number? b. What is the destination port number? c. What is the total length of the user datagram? d. What is the length of the data? e. Is the packet directed from a client to a server or vice versa? f. What is the client process? Answer a. The source port number is the first four hexadecimal digits (CB84), which means that the source port number is 52100. b. The destination port number is the second four hexadecimal digits (000D), which means that the destination port number is 13. c. The third four hexadecimal digits (001C) define the length of the whole UDP packet as 28 bytes. d. The length of the data is the length of the whole packet minus the length of the header, or 28 – 8 = 20 bytes. e. Since the destination port number is 13 (well-known port), the packet is from the client to the server. f. The client process is the Daytime. Well-known Ports in UDP UDP Encapsulation and Decapsulation When a process has a message to send through UDP, it passes the message to UDP along with a pair of socket addresses and the length of data. UDP Queues If a process wants to communicate, it obtains only one port number and one outgoing and one incoming queue. Multiplexing and Demultiplexing In a host running a TCP/IP protocol suite, there is only one UDP but possibly several processes that may want to use the services of UDP. UDP Data Transfer Typical Applications UDP is suitable for a process that requires simple request-response communication with little concern for flow and error control. It is not usually used for a process such as FTP that needs to send bulk data. UDP is suitable for a process with internal flow and error-control mechanisms. For example, the Trivial File Transfer Protocol (TFTP) process includes flow and error control. UDP is used for management processes such as SNMP. Typical Applications UDP is a suitable transport protocol for multicasting. Multicasting capability is embedded in the UDP software but not in the TCP software. UDP is normally used for real-time applications that cannot tolerate uneven delay between sections of a received message. UDP is used for some route updating protocols such as Routing Information Protocol (RIP). Transmission Control Protocol Connection-oriented, reliable - Provides connection-oriented/stream-oriented communication over a connectionless network layer protocol (IP). End-to-end full duplex link - Exactly two end points - Multicasting or broadcasting is not supported Supports flow control and error control Described in RFCs 793, 1122, 5681 Transmission Control Protocol TCP lies between the application layer and the network layer, and serves as the intermediary between the application programs and the network operations. Process-to-Process Communication As with UDP, TCP provides process-to-process communication using port numbers. Stream Delivery Service TCP, unlike UDP, is a stream-oriented protocol. Recall: UDP does not recognize any relationship between the datagrams (Connectionless) TCP creates an environment in which the two processes seem to be connected by an imaginary “tube” that carries their bytes across the Internet. Sending and Receiving Buffers Sending and the receiving processes may not necessarily write or read data at the same rate, thus, TCP needs buffers for storage. Segmentation The IP layer, as a service provider for TCP, needs to send data in packets, not as a stream of bytes. At the transport layer, TCP groups a number of bytes together into a packet called a segment. Sequence Numbers TCP sequence numbers are used to reconstruct the data stream with segments placed in the correct order. Other TCP Characteristics TCP offers full-duplex service, where data can flow in both directions at the same time. Like UDP, TCP performs multiplexing at the sender and demultiplexing at the receiver. TCP, unlike UDP, is a reliable transport protocol. It uses an acknowledgment mechanism to check the safe and sound arrival of data. TCP provides flow, error, and congestion control. TCP Segment Format The segment consists of a header of 20 to 60 bytes, followed by data from the application. TCP Segment Source port address. This is a 16-bit field that defines the port number of the application program in the host that is sending the segment. Destination port address. This is a 16-bit field that defines the port number of the application program in the host that is receiving the segment. Sequence number. This 32-bit field defines the number assigned to the first byte of data contained in this segment. To ensure connectivity, each byte to be transmitted is numbered. TCP Segment Acknowledgment number. This 32-bit field defines the byte number that the receiver of the segment is expecting to receive from the other party. Header length. This 4-bit field indicates the number of 4-byte words in the TCP header. The length of the header can be between 20 and 60 bytes. Reserved. This is a 6-bit field reserved for future use. TCP Segment Control. enables flow control, connection establishment and termination, connection abortion, and the mode of data transfer in TCP. TCP Segment Window size. This field defines the window size of the sending TCP in bytes. (length = 16 bits, maximum size of window is 65,535 bytes.) Checksum. This 16-bit field contains the checksum. Urgent pointer. It defines a value that must be added to the sequence number to obtain the number of the last urgent byte in the data section of the segment. Options. There can be up to 40 bytes of optional information in the TCP header. Encapsulation A TCP segment encapsulates the data received from the application layer. The TCP segment is encapsulated in an IP datagram, which in turn is encapsulated in a frame at the data-link layer TCP Connection Establishment The connection establishment in TCP is called three-way handshaking. A SYN segment cannot carry data, but it consumes one sequence number. A SYN + ACK segment cannot carry data, but does consume one sequence number. TCP Data Transfer TCP Connection Termination TCP States TCP vs. UDP Comparison TCP vs. UDP Comparison TCP vs. UDP Comparison Next Topics to Cover Congestion Control and Quality of Service