Welding Variables Quiz

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson
Download our mobile app to listen on the go
Get App

Questions and Answers

What does welding amperage refer to in a welding circuit?

  • The distance from the end of the contact tip to the base material
  • The amount and speed of electricity flowing in a circuit (correct)
  • The arc length in combination with the stick-out
  • The speed and volume of filler metal going into the weld

How does welding amperage affect weld penetration?

  • Higher amperage settings yield greater joint penetration (correct)
  • Higher amperage settings provide less joint penetration
  • Lower amperage settings have no effect on joint penetration
  • Lower amperage settings yield greater joint penetration

How does increasing the welding voltage affect stick-out and amperage?

  • Increasing the welding voltage increases stick-out and decreases amperage.
  • Increasing the welding voltage decreases stick-out and increases amperage. (correct)
  • Increasing the welding voltage has no effect on stick-out and amperage.
  • Increasing the welding voltage increases stick-out and also increases amperage.

What happens to welding amperage when the wire feed speed (WFS) decreases?

<p>Welding amperage decreases (A)</p> Signup and view all the answers

What effect does a higher wire feed speed (WFS) have on welding transfer modes?

<p>Higher WFS shifts the process into a spray transfer mode with small droplets of wire transfer. (D)</p> Signup and view all the answers

Which welding variable has an inverse relationship with contact-tip-to-work distance (CTWD)?

<p>Welding amperage (A)</p> Signup and view all the answers

What does a low wire feed speed (WFS) and voltage keep the welding process in?

<p>Short-circuit mode (A)</p> Signup and view all the answers

What is meant by contact-tip-to-work distance (CTWD) in welding?

<p>The distance from the end of the contact tip to the base material (C)</p> Signup and view all the answers

How does too high of an amperage affect welding with metal-cored wire?

<p>Results in a dull, flaky weld (D)</p> Signup and view all the answers

What is the relationship between welding voltage and arc length?

<p>Higher welding voltage equals a longer arc length (B)</p> Signup and view all the answers

Flashcards are hidden until you start studying

More Like This

Welding 170 OFC and OFW Flashcards
30 questions
AWS Welding Flashcards 2016
98 questions
Welding Safety Chapter 2 Flashcards
26 questions
Use Quizgecko on...
Browser
Browser