Podcast
Questions and Answers
What does joint design refer to in welding terminology?
What does joint design refer to in welding terminology?
- The tools used for welding the joint
- The material used for welding the joint
- The temperature at which the joint is welded
- The shape, dimensions, and configuration of the joint specified by Code and designer (correct)
What is the joint root in welding terminology?
What is the joint root in welding terminology?
- The outermost part of the welded joint
- The area where the joint is inspected after welding
- The portion of a joint to be welded where the members approach closest to each other (correct)
- The point where welding begins on the joint
What does joint type classification in welding include?
What does joint type classification in welding include?
- Butt, Corner, Edge, Lap, T (correct)
- Steel, Aluminum, Copper, Titanium
- MIG, TIG, Stick, Flux-cored
- Vertical, Horizontal, Overhead, Flat
What is joint geometry in welding terminology?
What is joint geometry in welding terminology?
What is the term for the junction of the weld face and the base metal?
What is the term for the junction of the weld face and the base metal?
What is the term for weld metal in excess of that required to fill a weld groove?
What is the term for weld metal in excess of that required to fill a weld groove?
What is the term for the distance that fusion extends into the base metal from the surface melted during welding?
What is the term for the distance that fusion extends into the base metal from the surface melted during welding?
What is the term for the interface between weld metal and base metal in a fusion weld or solid-state weld?
What is the term for the interface between weld metal and base metal in a fusion weld or solid-state weld?
What is the term for the exposed surface of a weld on the side from which welding was done?
What is the term for the exposed surface of a weld on the side from which welding was done?
What is the term for the preparation of the edges of the joint members by cutting, cleaning, plating, or other means?
What is the term for the preparation of the edges of the joint members by cutting, cleaning, plating, or other means?
What is the term for an angular edge shape?
What is the term for an angular edge shape?
What is the term for a separation at the joint root between the weld joint members?
What is the term for a separation at the joint root between the weld joint members?
What is the term for the joint penetration of a groove (butt) weld?
What is the term for the joint penetration of a groove (butt) weld?
What is the term for the leg lengths of the largest isosceles right triangle that can be inscribed within the fillet weld cross section?
What is the term for the leg lengths of the largest isosceles right triangle that can be inscribed within the fillet weld cross section?
What is the term for a single progression of welding along a joint, resulting in a weld bead or weld layer?
What is the term for a single progression of welding along a joint, resulting in a weld bead or weld layer?
What is the term for the points, shown in cross section, at which the weld metal intersects the base metal and extends furthest into the weld joint?
What is the term for the points, shown in cross section, at which the weld metal intersects the base metal and extends furthest into the weld joint?
