Water Distribution Systems
17 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the value of x in the Hardy-Cross method when using the Hazen-William's formula?

  • 1.65
  • 1.85 (correct)
  • 2
  • 1.5

In loop ABCD, what is the corrected flow in pipe BC after the first correction?

  • -28 l/s
  • -15 l/s
  • +28 l/s
  • +15 l/s (correct)

How is the value of d calculated in the Hardy-Cross method for loop DCFE?

  • +SHL / x
  • -SHL / x (correct)
  • SHL / x
  • HL / Qa

What does a negative value of corrected flow in a pipe indicate?

<p>The flow direction was assumed incorrectly (D)</p> Signup and view all the answers

For loop ABCD, if lHL/Qal = 4.86 l/s, what is the value of d in meters?

<p>+5 m (C)</p> Signup and view all the answers

What adjustments are made in the Hardy-Cross method until desired accuracy is obtained?

<p>Correcting assumed flows (D)</p> Signup and view all the answers

What is the primary purpose of a water distribution system?

<p>To deliver water to consumers with appropriate quality, quantity, and pressure (A)</p> Signup and view all the answers

Why is it important for distribution pipes to be laid away from sewer lines?

<p>To prevent water contamination (A)</p> Signup and view all the answers

Which of the following is NOT a requirement of a good distribution system?

<p>Storing excess water for emergencies (D)</p> Signup and view all the answers

Where are distribution pipes typically laid?

<p>Below road pavements (B)</p> Signup and view all the answers

What is the purpose of having a water-tight distribution system?

<p>To ensure minimal leakage and water losses (B)</p> Signup and view all the answers

How do the layout of distribution pipes generally follow?

<p>The layouts of roads (A)</p> Signup and view all the answers

What is the primary function of distribution reservoirs?

<p>To balance fluctuating water demand (B)</p> Signup and view all the answers

Where should distribution reservoirs ideally be located?

<p>As close as possible to the center of water demand (C)</p> Signup and view all the answers

What type of storage in distribution reservoirs helps equalize fluctuating demand against constant supply?

<p>Balancing storage (C)</p> Signup and view all the answers

How can the total storage capacity of a distribution reservoir be calculated?

<p>By adding balancing, breakdown, and fire storages (A)</p> Signup and view all the answers

What is the purpose of fire storage in distribution reservoirs?

<p>To extinguish fires during emergencies (A)</p> Signup and view all the answers

More Like This

Use Quizgecko on...
Browser
Browser