20 Questions
What should you do if V-SMART indicates the Bearing Inspection Procedure B prompt?
Select 'Continue'
What should you do after removing the required components as outlined in the Service Bulletin?
Select Engine Bearing on the selection screen
What is the next step after typing the crankshaft main journal codes into V-SMART?
Take a clear photo of the crankshaft and connecting rod journal codes
Where are the connecting rod bore codes located?
On the side of each connecting rod
What is the next step after selecting the Bore Code for the number 6 connecting rod?
Take a clear picture of the connecting rod bore code
What action should be taken after rotating the crankshaft to make the ID on connecting rod number 3 visible?
Select the Bore Code for the number 3 connecting rod
What should be done after V-SMART displays 'Journal and Bore code collection complete'?
Log out and follow the Service Bulletin for the Bearing Inspection Procedure A
When should the action 'Click 'Send'' be taken according to the given instructions?
After V-SMART displays 'Journal and Bore code collection complete'
What should be done after selecting the Bore Code for the number 5 connecting rod?
Take a clear picture of the connecting rod bore code
What is required when removing the connecting rod bearings according to the given instructions?
Follow the Service Bulletin for Bearing Inspection Procedure A
What should be done after carefully placing the 12 connecting rod bearings on the bearing support holders?
Insert the bearing support holders into the bearing support fixture and ensure the notches align with the openings labeled 'A'
When should the 'Bearing Angle A' prompt be selected, according to the given instructions?
After logging into V-SMART and selecting Engine Bearing on the selection screen
What should you do after positioning the V-SMART device over the opening located on top of the bearing support fixture?
Select 'Continue' after V-SMART identifies the vehicle information submitted
What action should be taken after entering the Repair Order number and selecting 'Continue' in V-SMART?
Scan the vehicle’s VIN label located on the driver’s side door jamb
What should you do after capturing the photo of bearing angle B?
Reposition both bearing support holders to match with the openings labeled 'C'
When should you click 'Submit Photo' as per the given instructions?
After capturing the photo of bearing angle B
What is the next step after placing the V-SMART device over the opening on top of the bearing support fixture?
Select 'Continue' on the V-SMART device
What action should be taken after V-SMART displays the username and the repair order number?
Send the information to the bearing inspection Group
What should be done after carefully closing the bearing support fixture and placing the V-SMART device over the opening on top of the bearing support fixture?
Select 'Continue' on the V-SMART device
When should you log out of the V-SMART device according to the given instructions?
After uploading information to the bearing inspection Group
Study Notes
V-SMART Procedure
- When V-SMART indicates the Bearing Inspection Procedure B prompt, proceed with removing the required components as outlined in the Service Bulletin.
Removing Components
- After removing components, type the crankshaft main journal codes into V-SMART.
Coding and Inspection
- Connecting rod bore codes are located on the connecting rods.
- After typing the crankshaft main journal codes, select the Bore Code for the number 6 connecting rod.
- After selecting the Bore Code, rotate the crankshaft to make the ID on connecting rod number 3 visible.
- Capture the photo of bearing angle B.
Data Collection
- After rotating the crankshaft, enter the crankshaft main journal codes into V-SMART.
- V-SMART will display 'Journal and Bore code collection complete' after data collection is complete.
Sending Data
- Click 'Send' after V-SMART displays 'Journal and Bore code collection complete'.
Bearing Inspection
- When prompted, select 'Bearing Angle A'.
- Position the V-SMART device over the opening located on top of the bearing support fixture.
- Carefully place the 12 connecting rod bearings on the bearing support holders.
- Remove the connecting rod bearings according to the instructions, ensuring proper care is taken.
Logging Out
- Log out of the V-SMART device after completing the procedure and capturing the required photos.
Final Steps
- Carefully close the bearing support fixture and place the V-SMART device over the opening on top of the bearing support fixture.
- After capturing the photo of bearing angle B, click 'Submit Photo'.
- After V-SMART displays the username and the repair order number, log out of the device.
Test your knowledge on the vehicle inspection procedure and the steps involved in determining the inspection type. This quiz covers topics like V-SMART feedback, username and repair order number display, and following service bulletin instructions.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
