Types of Medical Tapes

Play an AI-generated podcast conversation about this lesson

What is the primary purpose of applying lubricated protective padding during taping?

To clean the skin of oil and perspiration

To remove hair from the skin surface

To reduce friction and pressure in certain areas (correct)

To provide additional support to the muscle

Why should anchor strips be used at the beginning and end of each taping technique?

To prevent gaps and ensure a smooth application (correct)

To apply adherent spray to the skin

To remove hair from the skin surface

To provide extra support to the muscle

What is the primary purpose of non-elastic white tape in athletic taping?

To stick to the skin without removing hair

To absorb excessive sweat during exercise

To conform to the contour of the body

To provide support and protection to injured areas (correct)

What should be done to prevent wrinkles when applying tape?

Smooth each strip of tape with fingers or hands as it is applied Signup and view all the answers

What is the advantage of elastic tape over non-elastic tape?

It can conform to the contour of the body Signup and view all the answers

When applying tape to individuals with broken skin, what should be exercised?

Caution Signup and view all the answers

What should be avoided when applying tape to prevent skin irritations?

All of the above Signup and view all the answers

Why should adhesive tape be stored in a cool place?

To prevent the roll from distorting Signup and view all the answers

What is a suitable substitute for waterproof tape in athletic taping?

Duct tape Signup and view all the answers

What is the purpose of using prewrap when taping?

To protect skin from daily taping Signup and view all the answers

What is the characteristic of cast tape that makes it useful for athletic taping?

It is rigid and conforms to the contour of the body Signup and view all the answers

What is the first step in preparing for athletic taping?

Gather the equipment and supplies needed Signup and view all the answers

What should be applied to the body area before applying tape?

A thin, porous foam material Signup and view all the answers

What should be avoided when applying non-elastic and elastic tape?

Applying excessive traction on the skin Signup and view all the answers

What is the purpose of applying thin foam pads over bony prominences?

To reduce irritation and prevent cuts or blisters Signup and view all the answers

How should you remove non-elastic and elastic tape?

By pulling the tape across the skin while pulling the skin in the opposite direction Signup and view all the answers

What is the purpose of using tape removal solvents?

To remove the tape from the skin Signup and view all the answers

When using taping scissors or cutters, what direction should you cut the tape?

In a proximal-to-distal direction away from the body Signup and view all the answers

What is the purpose of padding bony prominences when applying tape?

To reduce irritation and discomfort Signup and view all the answers

How should the last 8-10 inches of tape be applied to the body?

Without roll tension Signup and view all the answers

What is the recommended time to wait after removing the tape from its pouch before applying it?

10-15 minutes Signup and view all the answers

What is the purpose of applying petroleum jelly or silicone to examination or surgical gloves during cast tape application?

To protect the hands from tape resin and prevent the tape from adhering to the gloves Signup and view all the answers

What is the purpose of anchors in taping?

To minimize traction on the skin and reduce skin drag Signup and view all the answers

Why should tape with zinc oxide adhesive mass be stored in a cool place?

To prevent the adhesive from becoming sticky and difficult to unwind Signup and view all the answers

What is the recommended temperature of water for immersing rigid and semi-rigid tapes?

70-75 degrees Fahrenheit Signup and view all the answers

What is the purpose of support strips and stirrups in taping?

To restrict unwanted sideways movement Signup and view all the answers

How much time is typically allowed to apply, mold shape, or create a circular pattern with the cast tape after immersion in water?

3-5 minutes Signup and view all the answers

What is the purpose of using taping scissors during cast tape application?

To make partial cuts in the material to fit the contours of the body Signup and view all the answers

What should be placed directly on the skin when applying rigid tape?

One layer of stockinet Signup and view all the answers

What should be avoided during cast tape application to lessen irritation?

Gaps, wrinkles, inconsistent roll tension, or direct contact of the tape with the skin Signup and view all the answers