New Holland T 6.145 tractor Operation and Safety Hard Version
65 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the consequence of operating the tractor in too low a gear with a light load and high engine speed?

  • Reducing engine wear
  • Wasting fuel (correct)
  • Increasing fuel efficiency
  • Improving tractor performance

    • What should you do before operating the tractor?

  • Perform daily lubrication and maintenance operations
  • Start the engine and begin driving
  • Read the safety precautions in Section 2 of the manual (correct)
  • Check the instruments and warning lights

    • Why is it important to read Section 2 of the manual?

  • To learn how to drive the tractor
  • To learn how to troubleshoot common issues
  • To know how to perform daily maintenance operations
  • To understand the location and operation of the instruments and controls (correct)

    • What should you do if you are unsure about any aspect of the tractor's operation?

    <p>Consult your authorised dealer</p> Signup and view all the answers

    What is the purpose of performing daily lubrication and maintenance operations?

    <p>To ensure the tractor's longevity</p> Signup and view all the answers

    What should you do after completing the daily maintenance operations?

    <p>Perform a walk-around visual inspection of the tractor and complete a pre-trip</p> Signup and view all the answers

    What is the benefit of selecting the correct transmission ratio for each operation?

    <p>Minimizing engine wear and fuel waste</p> Signup and view all the answers

    Why is it important to check the instruments and warning lights frequently?

    <p>To identify potential issues before they become major problems</p> Signup and view all the answers

    What is a prerequisite for operating a tractor?

    <p>Completed in class traning and metorship in the feild</p> Signup and view all the answers

    What is the purpose of periodical service?

    <p>To maintain the tractor's expected lifetime</p> Signup and view all the answers

    Who should perform converting activities on a tractor?

    <p>Trained personnel familiar with the tractor</p> Signup and view all the answers

    What is the purpose of this manual?

    <p>To provide information for use of the machine</p> Signup and view all the answers

    What is the recommended storage location for this manual?

    <p>In the provided pocket in the back of the seat</p> Signup and view all the answers

    What should be reviewed before operating the tractor?

    <p>This manual and other Company literature</p> Signup and view all the answers

    What is the primary purpose of routine service and maintenance?

    <p>To maintain the tractor's proper function and performance</p> Signup and view all the answers

    What is included in routine service activities?

    <p>Fueling, cleaning, washing, and greasing</p> Signup and view all the answers

    What is the recommended source of information for specific details about a particular tractor?

    <p>The authorized dealer</p> Signup and view all the answers

    Why is it important to maintain the tractor's condition?

    <p>To ensure trouble-free operation and performance</p> Signup and view all the answers

    What is the purpose of the tractor's inspection before delivery?

    <p>To ensure the tractor reaches the customer in optimum condition</p> Signup and view all the answers

    What is the importance of consulting the operator manual and decals on the tractor?

    <p>To ensure routine service and maintenance are done correctly</p> Signup and view all the answers

    What is the consequence of not performing routine service and maintenance?

    <p>The tractor's performance and economy may be affected</p> Signup and view all the answers

    What is the primary concern when operating a machine on inclines and steep hills?

    <p>Maintaining machine stability</p> Signup and view all the answers

    What is the purpose of ballasting a machine?

    <p>To improve machine stability</p> Signup and view all the answers

    What is the primary section for information on stopping the tractor's engine?

    <p>Section 4</p> Signup and view all the answers

    What should you check frequently to ensure safe operation?

    <p>Instruments and warning lights</p> Signup and view all the answers

    What speed management system is discussed in Section 4?

    <p>Low idle speed management</p> Signup and view all the answers

    What is the consequence of not following machine stability requirements?

    <p>Death or serious injury</p> Signup and view all the answers

    In what section can you find information on safe transport speed?

    <p>Section 5</p> Signup and view all the answers

    What factor affects machine stability?

    <p>Inclines and steep hills</p> Signup and view all the answers

    What is the purpose of Section 5.2?

    <p>Carrying the tractor on a transporter</p> Signup and view all the answers

    Where can you find information on maximum permitted operating weights?

    <p>In the vehicle weights section</p> Signup and view all the answers

    What is the purpose of calculating the required front and rear mounted ballast?

    <p>To improve machine stability</p> Signup and view all the answers

    What system is discussed in Section 6 in relation to engine power management?

    <p>Variable engine power management</p> Signup and view all the answers

    What should you do when operating a machine on uneven ground?

    <p>Always consider machine stability</p> Signup and view all the answers

    What is the purpose of the HTS standard in Section 6?

    <p>To provide a general overview of working operations</p> Signup and view all the answers

    What is the purpose of the shuttle lever in Section 6?

    <p>To control the transmission</p> Signup and view all the answers

    What is the purpose of recording and replaying sequences in Section 6?

    <p>To analyze working operations</p> Signup and view all the answers

    What is the maximum speed of the New Holland T 6.145 tractor?

    <p>45 km/h</p> Signup and view all the answers

    What is the potential consequence of not adjusting ballast and driving speed accordingly?

    <p>Death or serious injury</p> Signup and view all the answers

    What is the purpose of evaluating stability data for a laden tractor?

    <p>To comply with safety regulations</p> Signup and view all the answers

    What is the primary consideration when operating a tractor on uneven ground?

    <p>Monitoring the tractor's stability</p> Signup and view all the answers

    Which engine condition is a result of overloading the engine?

    <p>Excessive engine overloading</p> Signup and view all the answers

    What is the purpose of calculating the required front and rear mounted ballast?

    <p>To ensure stable and accurate steering</p> Signup and view all the answers

    What is the consequence of not complying with safety regulations?

    <p>Death or serious injury</p> Signup and view all the answers

    What should you check regularly to ensure safe operation?

    <p>Hoses, lines, and fittings for leaks or damage</p> Signup and view all the answers

    What can cause excessive engine overloading?

    <p>Operating in too high a gear under heavy load</p> Signup and view all the answers

    What is the purpose of Reading the operator manual and decals on the tractor?

    <p>To ensure safe operation</p> Signup and view all the answers

    What should you do before using the tractor?

    <p>Make any necessary repairs</p> Signup and view all the answers

    What is the consequence of not following machine stability requirements?

    <p>Death or serious injury</p> Signup and view all the answers

    Why is it essential to ajust the type of operation during the running-in period?

    <p>To prevent engine damage</p> Signup and view all the answers

    What should you avoid during the 50-hour running-in period?

    <p>Operating without a load on the engine</p> Signup and view all the answers

    What is the primary concern when operating a machine on inclines and steep hills?

    <p>Being aware of the effect on machine stability</p> Signup and view all the answers

    What is the consequence of not following machine stability requirements?

    <p>Death or serious injury may occur</p> Signup and view all the answers

    What is the primary concern when operating a machine on uneven ground?

    <p>Being aware of the machine's stability</p> Signup and view all the answers

    Why is it important to check the instruments and warning lights frequently?

    <p>To detect potential malfunctions or hazards</p> Signup and view all the answers

    What is the purpose of the warning signs and symbols in the manual?

    <p>To warn the operator of potential hazards or malfunctions</p> Signup and view all the answers

    What is the consequence of not being aware of the machine's stability on uneven ground?

    <p>Death or serious injury may occur</p> Signup and view all the answers

    What does the abbreviation 'PPE' stand for in the context of safety?

    <p>Personal Protective Equipment</p> Signup and view all the answers

    What is the term for the process of converting a tractor's operating system?

    <p>Converting activities</p> Signup and view all the answers

    What is the term for the measurement of water hardness in Germany?

    <p>German hardness</p> Signup and view all the answers

    What is the unit of measurement for pressure or stress?

    <p>All of the above</p> Signup and view all the answers

    What is the primary reason for studying the safety precautions in Section 2 of the manual?

    <p>To prevent accidents and ensure safe operation</p> Signup and view all the answers

    What is the primary reason for performing daily lubrication and maintenance operations?

    <p>To prevent wear and tear on the engine and other components</p> Signup and view all the answers

    Why is it important to read Section 2 of the manual carefully?

    <p>To ensure safe operation of the tractor</p> Signup and view all the answers

    What should you do before starting the engine or operating the tractor?

    <p>Ensure you are familiar with all the controls and instruments</p> Signup and view all the answers

    Study Notes

    Pre-Operation Checks

    • Before operating the tractor, ensure familiarity with the location and operation of all controls and instruments.
    • Perform all daily lubrication and maintenance operations according to Section 7.
    • Conduct a walk-around visual inspection of the tractor after completing daily maintenance operations.

    Safe Operation

    • Operate the tractor in the correct gear for the load to avoid wasting fuel and minimize engine wear.
    • Check instruments and warning lights frequently and maintain recommended levels of coolant, oil, and other fluids.
    • Ensure the radiator and oil reservoirs are filled to the recommended levels.

    Tractor Maintenance

    • Routine service and maintenance includes daily activities such as fueling, cleaning, washing, topping up fluid levels, greasing, and replacing consumable articles.
    • Perform routine services at the recommended intervals to maintain the tractor's proper function.

    Regulatory Compliance

    • The tractor fulfills all requirements as specified in the Regulation (EU) No 167/2013 of the European Parliament and of the Council.

    Machine Stability

    • Always consider and follow the machine stability requirements in the manual to prevent machine instability.
    • Calculate the required front-mounted and rear-mounted ballast according to the procedure in the manual.
    • Be aware of the effect of inclines and steep hills on machine stability, as it may affect operating, handling, and braking performance.

    General Information

    • Machine stability is crucial to prevent death or serious injury, and it's essential to consider and follow the machine stability requirements in the manual.
    • Calculation of the required front and rear mounted ballast is based on the machine on even ground, and operating, handling, and braking performance may be affected by inclines and steep hills.

    Necessary Data to Evaluate Stability

    • Mass of the unladen tractor (MT) is the tractor with standard equipment, minimum fuel, no weights or liquid ballast, and no operator.
    • Front axle load unladen tractor (MF) and rear axle load unladen tractor (MR) can be found in the manual.
    • Other necessary data include distance Centre of Gravity front load to front axle centre (a), wheelbase (b), distance rear axle centre to lower hitch point of three-point linkage (c), and more.

    International Symbols

    • The manual uses universal symbols to guide the operation of the machine, and these symbols are shown with their meanings.

    Metric and Imperial Units Abbreviations

    • The manual provides a list of typical applications with metric and imperial units abbreviations, including area, electricity, force, frequency, length, mass, power, pressure or stress, temperature, time, torque, velocity, and volume.

    Glossary

    • The manual provides a glossary of acronyms and definitions, including DEF, ISO, MSDS, NOx, PPE, SCR, ULSD, and more.

    To the Owner

    • Before driving or operating the tractor, study the safety precautions in Section 2 of the manual.
    • Read the manual thoroughly to understand the operational requirements and location and operation of the various instruments, switches, and controls.
    • Perform daily lubrication and maintenance operations in accordance with Section 7.

    Running-in Procedure

    • After completing the daily maintenance operations, perform a walk-around visual inspection of the tractor.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Related Documents

    T6.145 Operators Manual Jan 18 2022 PDF

    Description

    Learn about the safe and efficient operation of a tractor, including selecting the correct gear and transmission ratio to minimize engine wear and fuel waste.

    More Like This

    Fox 4E Towing Tractor: Operation and Controls
    26 questions

    Fox 4E Towing Tractor: Operation and Controls

    ImpeccableAquamarine avatar
    ImpeccableAquamarine
    Manual on Accident Factors and Tractor Safety Quiz
    12 questions

    Manual on Accident Factors and Tractor Safety Quiz

    LuxuriousTuring avatar
    LuxuriousTuring
    Seguridad al Operar un Tractor
    13 questions

    Seguridad al Operar un Tractor

    GoodWerewolf avatar
    GoodWerewolf
    Agricultural Tractors Overview
    48 questions

    Agricultural Tractors Overview

    WellManagedEiffelTower7186 avatar
    WellManagedEiffelTower7186
    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser