A-CHNG Changeover Apparatus

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Who is responsible for taking a complete inventory of all equipment during a changeover?

Firefighters responsible for driving (correct)

Communications Centre Officers

Company Officers

Mechanical Division

What happens when an apparatus has a mechanical failure of major fire operations components?

It is subject to changeover (correct)

It is used for emergency operations only

It is sent to the Mechanical Division for repair

It is exempt from changeover

Who advises the Communications Centre about the location of spare apparatus?

Mechanical Division

Company Officers

Communications Centre Officers (correct)

Firefighters responsible for driving

What is the responsibility of the Company Officer regarding equipment removed from their apparatus?

To inventory and account for the equipment every shift Signup and view all the answers

What is the last resort or temporary measure for Aerials with mechanical failure of the aerial devices?

Operation for exclusive use of the equipment Signup and view all the answers

Who determines the road worthiness of an apparatus?

Driver of the apparatus Signup and view all the answers

Who does the Company Officer consult with regarding the prospect of immediate repair to an apparatus?

Mechanical Division Signup and view all the answers

What happens to an apparatus removed from service due to safety or mechanical concerns?

The Company Officer notifies the District Chief immediately Signup and view all the answers

What must be done to an apparatus to ensure it will not be damaged by the elements when stored outside?

Open all valves and drains, remove all inlet and outlet caps, and drain water from the water tank and pump Signup and view all the answers

What is the purpose of the Fire Apparatus Removal from Service Tag?

To confirm the reasons a vehicle was removed from service and ensure all water is drained from the system Signup and view all the answers

When a reserve apparatus is removed from service, what must be done with it?

Return it to its designated fire station Signup and view all the answers

Why is it important to eliminate the chance of an unsafe vehicle being used for service?

To prevent accidents and ensure crew safety Signup and view all the answers

What is required for personnel participating in the changeover procedure?

Approved safety footwear Signup and view all the answers

What happens to a vehicle when it is returned to service and changed over?

The reserve apparatus is returned to its designated fire station or the Mechanical Division Signup and view all the answers

What must be done to a removed reserve apparatus before it is stored?

Leave it in a state of cleanliness Signup and view all the answers

What is ensured by filling out the Fire Apparatus Removal from Service Tag?

The reasons for removal from service are confirmed Signup and view all the answers

Who determines the changeover location in consultation with the Company Officer and the Mechanical Division?

District Chief Signup and view all the answers

What is the purpose of the aluminum brackets on spare apparatus?

To enhance the identification of spare apparatus at an emergency scene Signup and view all the answers

Who is responsible for keeping a written inventory of all items transferred during a changeover?

Driver of the apparatus Signup and view all the answers

What happens to equipment that cannot be carried aboard the changeover apparatus?

It is stored in the respective fire station Signup and view all the answers

Who is responsible for initiating a radio identification change with the Communications Centre during a changeover?

Company Officer Signup and view all the answers

What is the purpose of the identification plates on spare apparatus?

To identify the crew using the spare apparatus Signup and view all the answers

What happens to the vehicle radio identifier when a specialty aerial device is replaced with a spare Aerial?

It is changed to 'A' followed by the apparatus number Signup and view all the answers

Who is responsible for reviewing the Attributes and Equipment and reporting any changes to the District Chief during a changeover?

Officer Signup and view all the answers

What happens to apparatus removed from service?

They are stored inside whenever possible Signup and view all the answers

Who is responsible for notifying the Communications Division regarding the status of the changeover procedure?

Company Officer Signup and view all the answers

Study Notes

Changeovers of Apparatus

Changeovers occur when a fire apparatus is replaced with a reserve unit due to mechanical failure or safety concerns.
The driver and Company Officer are responsible for conducting an inventory of equipment transferred during the changeover.

Responsibility

Firefighters driving the apparatus are responsible for:
- Conducting a complete inventory of all equipment transferred
- Recording each item transferred during the changeover
- Conducting a complete inspection of the apparatus
Company Officers are responsible for:
- Ensuring changeovers are conducted in accordance with the guideline
- Ensuring all equipment removed from the apparatus is inventoried and accounted for
- Notifying the Communications Centre of the location of spare apparatus
Communications Centre Officers are responsible for posting the location of spare apparatus.

Guidelines

Changeovers occur when an apparatus is deemed not roadworthy due to mechanical failure or safety concerns.
The Company Officer shall consult with the Mechanical Division regarding immediate repair options.
Aerials with mechanical failure of aerial devices are exempt from changeovers when the District Chief, Platoon Chief, and Communications are advised of the status and operation is for exclusive use of the equipment.

Procedure

The changeover location is determined by the District Chief in consultation with the Company Officer and Mechanical Division.
The vehicle to be loaded shall be inspected and operationally tested to ensure it meets emergency operation requirements.
All Firefighters shall participate in the changeover procedure.
The apparatus or vehicle being changed over shall be completely emptied of equipment and fire hose.
Equipment that cannot be carried aboard the changeover apparatus shall be completely inventoried and securely stored in the respective fire station.

Identification

Spare apparatus are outfitted with aluminum brackets to hold front-line truck number plates for identification at emergency scenes.
Each spare apparatus has two brackets installed, one at the front and one at the rear.
Identification plates are installed on the spare apparatus during changeovers.

Notification

The Company Officer shall notify the Communications Division of the status of the changeover procedure.
The Company Officer shall initiate a radio identification change with the Communications Centre to correctly identify the vehicle.

Apparatus Removed from Service

Apparatus removed from service shall be stored inside whenever possible or prepared for outdoor storage to prevent damage from the elements.
A Fire Apparatus Removal from Service Tag shall be filled out by the Officer in charge and left in the Driver's window.

Safety

All personnel participating in the changeover procedure shall wear approved safety footwear.
All personnel shall abide by safety rules during the changeover procedure.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Guidelines for Toronto Fire Service personnel on changeovers of apparatus to and from reserve units, including inventory and inspection procedures.