Tool Maker Universal Vice

Play an AI-generated podcast conversation about this lesson

What is the term for cutting faces on the workpiece perpendicular to its rotating axis?

Boring
Facing (correct)
Turning
Profiling

What type of automation is commonly used in modern turning processes?

Computer numerical control (CNC) (correct)
Automated lathe
Manual operation
Robotics

What is the primary motion of the workpiece in a turning process?

Oscillating motion
Rotational motion (correct)
Linear motion
Reciprocating motion

What is the term for turning on the inside of a cylinder to produce tubular components?

Boring (D) Signup and view all the answers

What is the oldest type of machine tool used in turning processes?

Lathe (D) Signup and view all the answers

What is the term for producing complex geometric figures using a lathe?

Path control (D) Signup and view all the answers

What is the effect of setting the cutting edge too high above the centre of the work?

The work will rub against the tool and the cutting action will be inefficient (A) Signup and view all the answers

What happens when the tool is set too much below the centre of the work?

The tool will treat on the work surface (C) Signup and view all the answers

What should you do before drilling into a work piece?

Face the end of the work piece (A) Signup and view all the answers

What is the result of setting the nose of the tool slightly above the centre of the work?

The chip flow will be improved, reducing the cutting force (C) Signup and view all the answers

What is the effect of increasing the clearance angle α?

Chips separate easily and thicker chips can be removed (A) Signup and view all the answers

What is the purpose of centre drilling?

To prevent a twist drill from walking (C) Signup and view all the answers

What is the material used to make centre drills in a workshop?

HSS (D) Signup and view all the answers

What is the result of excessive overhang of the cutting tool?

Vibrations will occur and may break the tool (C) Signup and view all the answers

What is the type of centre drill that has a perpendicular protective chamfer and straight running surfaces?

Type-C (A) Signup and view all the answers

What happens when the cutting edge is set a maximum of 5° above the centre?

Normal cutting action will occur (C) Signup and view all the answers

What is the purpose of a spotting drill?

To create a conical hole for a millin centre (B) Signup and view all the answers

What is the shape of the hole created by a drill bit?

Circular (C) Signup and view all the answers

What is the primary purpose of a universal vice?

To perform angular cuts and swivel in a horizontal plane (C) Signup and view all the answers

What is the purpose of parallel bars?

To raise and seat the workpiece above the vice jaws and parallel with the vice bottom (C) Signup and view all the answers

What is the function of an angle plate?

To support workpieces at right angles to another surface (B) Signup and view all the answers

What is unique about a tilting type angle plate?

One face can be adjusted relative to the angle (A) Signup and view all the answers

What is the purpose of a V-block?

To hold shafts for milling (D) Signup and view all the answers

What feature prevents a V-block from moving sideways on the machine table?

A torque at its base (A) Signup and view all the answers

What is one of the purposes of chamfering?

To permit for easy assembly of mating components (B) Signup and view all the answers

What is the typical angle of chamfer used in chamfering?

45° (A) Signup and view all the answers

What is used to chamfer the edge of a workpiece in one of the methods?

A smooth file (A) Signup and view all the answers

How is the feeding done in chamfering using a tool?

By hand wheel (D) Signup and view all the answers

What is the purpose of noting the reading of the graduated collar of the slide?

To ensure the tool-cutting edge just touches the work edge (A) Signup and view all the answers

What is the advantage of using a tool with its cutting edge ground at 45° to the axis of the tool?

It provides a smooth, angled surface (B) Signup and view all the answers