19 Questions
What is the protocol for placing equipment mounts on a customer's roof?
Place the mount as high on the roof as possible while achieving the best LOS
Where should the Anchor equipment be mounted?
In a location with the best visibility to the site upstream
How many visits are required after the initial installation for aligning and optimizing the area when a second mount is needed?
3 visits
Where should the mounts always be placed?
In the best serviceable location
What is the minimum number of skids required for a box mount installation?
2
What is the purpose of using outdoor rated floor mats under the box mount?
To prevent roof damage to the customer's home
What is the purpose of installing a self tapper on the support arm clamp?
To prevent the support arm from moving
What type of mounts are required for flat membrane, metal and wood shingle type roofs?
Non-penetrating peak mounts
What is the purpose of using cement bricks during a box mount installation?
To avoid penetrating the roof
What should be done to prevent bolts from stripping during the leveling process of the J-arm?
Hand tighten the bolts while leveling the J-arm
When should front struts be installed when adding support arms to the tile mount assembly?
Before inserting the hex bolt into the press fit nut
What type of roofs should Penetrating Mounts be used on?
Asphalt shingle roofs
What should be done to avoid wood splitting when penetrating an asphalt roof?
Pre-drill all holes with the provided 3/16’’ wood drill bit
When should the bolts and nuts on the support arms be wrench tightened?
Once the J-arm is leveled and plum
What should technicians use to achieve optimal LOS when installing J-arms?
The correct size of J-arm
What should technicians do to ensure the mast remains leveled and plum when connecting the J-arm to the nut?
Ensure the hardware is properly tightened
What should technicians avoid when installing J-arms on a tile roof?
Drilling into a roof tile
How should technicians install the carriage bolts when installing the tile mount?
In the direction of the square hole
What should technicians do to avoid bending the metal frame of the mount when installing the tile mount?
Do not over tighten the bolts
"Mastering Tile Mount Assembly: Tips and Tricks for Proper Installation" - Test your knowledge on the do's and don'ts of tile mount assembly installation. Learn how to properly level the J-arm, tighten the hardware, and install support arms and front struts. Avoid common mistakes that can lead to stripped bolts and difficult adjustments. Take the quiz now to become a tile mount assembly installation pro!
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free