Steel Structures Planning and Installation Quiz

Play an AI-generated podcast conversation about this lesson

What should be done to the tiles before installation according to the text?

Soak in water (correct)

Apply a layer of paint

Dip in oil

Clean with a brush

Which type of tiles should be firmly laid on a 1:2 cement paste based on the text?

Ceramic tiles

Porcelain tiles

Granito tiles (correct)

Marble tiles

What is the purpose of cleaning the wall thoroughly with water and a brush as mentioned in the text?

To add color to the walls

To remove any dust and dirt (correct)

To make the walls waterproof

To improve tile adhesion

Which local manufacturer is suggested for glazed tiles according to the text?

'MARIWASA' Signup and view all the answers

What is required to comply with the electrical works according to the text?

Adhering to safety standards Signup and view all the answers

How should the tiles for wainscoting be placed based on the text?

Vertically Signup and view all the answers

What is the main focus of the work covered in this section of the specification?

Preparing surfaces properly Signup and view all the answers

What is required for paint materials to meet the specifications?

Standardization committee compliance Signup and view all the answers

What should be done with paint materials before delivery to the job site?

Maintaining original packaging and seal unbroken Signup and view all the answers

What is the purpose of using color pigments in producing finished paint?

To achieve the desired color Signup and view all the answers

How should wood surfaces be treated for painting according to the text?

Completely dried and sanded properly Signup and view all the answers

Which of the following is NOT mentioned as part of the color scheme consideration for painting?

Building height Signup and view all the answers

What is the required distance from the floor for the relief vent for double stacks?

At least 1.2 m Signup and view all the answers

What type of material should be used for the sanitary pipes, fittings, and accessories?

SANIHOLD Signup and view all the answers

What is the minimum size of the floor drain cover required?

4" x 4" Signup and view all the answers

What is the minimum requirement for the connection of the water closet?

Connection shall be made to soil pipe by means of flange without the need for caulking Signup and view all the answers

What type of tile should be used for the floor and partitions?

Glazed ceramic tiles Signup and view all the answers

What is the requirement for the traps of the plumbing fixtures?

The traps shall be separately trapped Signup and view all the answers

What should be done with steel plates, angle bar, and blend C prior to installation?

Galvanized for rust protection Signup and view all the answers

What is the recommended practice for storing roofing materials to prevent moisture damage?

Kept dry and stacked clear of the ground Signup and view all the answers

Which specialist should be responsible for the installation of roofing sheets according to the text?

Person specializing in the same as per manufacturer's specifications Signup and view all the answers

What surface finishes are acceptable for interior walls according to the text?

Finished with wall papers or a similar grade surface finish Signup and view all the answers

How should projecting wires or other design elements on interior walls be handled during finishing?

Enlarged, roughened, and filled with mortar similar to concrete Signup and view all the answers

What is the primary purpose of using cement finish on concrete surfaces according to the text?

To create a smooth and aesthetically pleasing surface Signup and view all the answers

What is the minimum depth required for the sides of the crack before it can be filled with mortar?

5 cm Signup and view all the answers

What type of wood is specified for the panel doors?

Hardwood Signup and view all the answers

What is the required specification for the door hinges?

Both (a) and (c) Signup and view all the answers

What type of lock is specified for the doors?

Yale locks Signup and view all the answers

What is the specified finish for the cabinet handles?

Nickel-plated Signup and view all the answers

What is the purpose of the 'PAINTING WORKS' section in the specification?

To cover the complete painting and finishing of the wood surfaces Signup and view all the answers