Questions and Answers
Any injury, no matter how minor, must be reported to the ______.
INSTRUCTOR
You will then be required to go to the office to fill out an ______ report.
accident
Welding is never permitted on any type of gas tank due to the danger of an ______.
explosion
After reporting an injury, you must receive ______ for the injury.
Signup and view all the answers
In the case of any injury, reporting it to an ______ is mandatory.
Signup and view all the answers
When using the portable sandblaster, never attempt to make any adjustment unless the ______ supply and cord are disconnected.
Signup and view all the answers
You must check with the ______ before raising a vehicle.
Signup and view all the answers
Before removing parts or getting under the vehicle, ______ must be placed under the vehicle.
Signup and view all the answers
You must ______ other people near the car before lowering the vehicle.
Signup and view all the answers
A vehicle must never be allowed to rest on a ______ while working under or on a vehicle.
Signup and view all the answers
When using an air chisel, never pull the ______ unless the bit is against the surface to be cut.
Signup and view all the answers
When operating an air chisel, avoid pointing it at ______ or anyone else.
Signup and view all the answers
The ______ lead on the battery charger must be connected to the engine block or vehicle frame.
Signup and view all the answers
Study Notes
Injury Reporting
- Report any injury, no matter how minor, to the instructor immediately.
- Fill out an accident report and seek medical treatment as needed.
Welding Precautions
- Never weld on any gas tank to avoid explosion risks.
Portable Sandblaster Safety
- Disconnect supply and cord before making any adjustments, such as changing brushes or emptying the dust pail.
Floor Jack Guidelines
- Always check with the instructor before raising a vehicle, even if trained in floor jack use.
- Ensure jack stands are placed under the vehicle before removing parts or getting underneath.
Vehicle Lowering Protocol
- Warn nearby individuals before lowering the vehicle onto tires or safety stands.
- A vehicle must not rest on a jack while working underneath or overnight.
Air Chisel Usage
- Only pull the air chisel trigger when the bit is against the intended surface.
- Wear ear protection, gloves, and safety glasses while using an air chisel.
- Hold the air chisel with both hands for stability.
- Never point the air chisel at yourself or others.
- Operate the air chisel away from gas tanks to prevent explosions.
Battery Charger Safety
- Unplug the power supply cord before connecting or disconnecting a battery charger.
- Avoid smoking, grinding, welding, or creating sparks near a battery to prevent explosions.
- If sulfuric acid comes into contact with skin or eyes, flush with water immediately and report to the instructor.
Battery Connection Method
- Connect the negative lead of the battery charger to the engine block or vehicle frame last to prevent sparks.
Oxygen Regulator Safety
- Keep oil or grease away from oxygen regulators to avoid explosion hazards.
- Adjust acetylene regulators to a maximum working pressure of 2 PSI, as instability occurs above this threshold, increasing explosion risk.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
This quiz covers essential safety procedures associated with welding, emphasizing the importance of reporting injuries and hazards. Welding safety practices, particularly in relation to gas tanks, are crucial to prevent accidents. Understanding these protocols is vital for a safe working environment.
