Roughing-In for Distribution System Quiz

Fish tape is a tool used to pull wire through conduit.

A wire-pulling compound is a conductive lubricant.

Nylon tapes are more expensive than traditional fish tapes for small jobs.

When using a wire-pulling compound, it should be applied more heavily at the end of the pull.

A fish tape is typically used to pull wire through straight runs of conduit.

A lighting panel board and a power panel board are the same type of distribution system.

Cable pulling is an operation of pushing a galvanized iron wire in the conduit through one outlet until the end reaches the next outlet.

It is easier to push a wire through conduit if it is very short and perfectly straight.

Dry and bare wiring creates less friction when being pulled through PVC conduit.

Pulling wires through conduit is always easier when done solo.

Roughing-in for distribution system involves attaching the ends of the wire conductors to G.I. wire and pushing it out of the conduit.

Friction from the conduit materials can make it difficult to pull wires through, especially in PVC conduits.