Podcast
Questions and Answers
ROOF FRAMING COMPRISES THE ______, BOTTOM CHORD, RAFTERS, PURLINS COLLAR PLATE, CENTER POST, STRUT AND BLOCKS
ROOF FRAMING COMPRISES THE ______, BOTTOM CHORD, RAFTERS, PURLINS COLLAR PLATE, CENTER POST, STRUT AND BLOCKS
GIRTS
SHORTER PARTS LIKE COLLAR PLATES, KING POST, STRUT AND WOOD BLOCKS ARE DETERMINED ACCORDING TO THEIR SIZES COMBINED TOGETHER AND ADJUSTED TO THE COMMERCIAL LENGTH OF ______
SHORTER PARTS LIKE COLLAR PLATES, KING POST, STRUT AND WOOD BLOCKS ARE DETERMINED ACCORDING TO THEIR SIZES COMBINED TOGETHER AND ADJUSTED TO THE COMMERCIAL LENGTH OF ______
LUMBER
Lumber intended for studs should be straight and uniform in width of either S2s or S4s for uniformity of wall ______
Lumber intended for studs should be straight and uniform in width of either S2s or S4s for uniformity of wall ______
THICKNESS
STUD Stud is the structural member in building construction wherein the sidings or partition boards are fastened. It is sometimes referred to as the ribs of wooden walls or ______.
STUD Stud is the structural member in building construction wherein the sidings or partition boards are fastened. It is sometimes referred to as the ribs of wooden walls or ______.
Signup and view all the answers
Studs in building construction are used to support the roof framing.
Studs in building construction are used to support the roof framing.
Signup and view all the answers
There are two ______
There are two ______
Signup and view all the answers
S2s and S4s lumber are preferred for studs due to their irregular thickness.
S2s and S4s lumber are preferred for studs due to their irregular thickness.
Signup and view all the answers
The direct counting method is used to compute the shorter parts like collar plates, king post, strut, and wood blocks.
The direct counting method is used to compute the shorter parts like collar plates, king post, strut, and wood blocks.
Signup and view all the answers
A detailed drawing indicating the sizes and lengths of the parts is unnecessary for accurate estimating of roof framing components.
A detailed drawing indicating the sizes and lengths of the parts is unnecessary for accurate estimating of roof framing components.
Signup and view all the answers
The work progress is affected or delayed when using S2s and S4s lumber for studs.
The work progress is affected or delayed when using S2s and S4s lumber for studs.
Signup and view all the answers
