RMS Map Output and Volumetrics Quiz

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What happens if a specified volumetrics report file already exists?

The program crashes and needs to be restarted.

The existing report file is automatically overwritten without any warning message.

The new report file is saved with a different name to avoid overwriting.

A warning message is displayed asking if you want to overwrite the previous report file. (correct)

How is a report table created?

By entering the data manually into a spreadsheet.

By using a predefined template with placeholders for values.

As a data object with the appropriate number of rows and columns, with values set as undefined (-999). (correct)

By selecting the 'Create Report Table' option from the menu.

What does clicking 'Save' in the Volumetrics dialog box allow you to do?

Save the settings as a job, include the job in a workflow, and then run the workflow. (correct)

Create a backup of the current project realization.

Close the Volumetrics dialog box without saving any changes.

Export the volumetrics data to an external file.

What is the purpose of the General tab in the Volumetrics dialog box?

To set up the volumes to be calculated and specify a job for volume calculations Signup and view all the answers

What does the Region Index in the General tab of the Volumetrics dialog box allow you to select?

A discrete parameter defining a region partition Signup and view all the answers

In the Volumetrics dialog box, what is the purpose of the Variables tab?

To define attributes in the region model and populate settings based on them Signup and view all the answers

How can you access the Volumetrics dialog box from the Workflows pane?

Expand Grid model ➥ Volumetrics in the Jobs tree, and then select Volumetrics Signup and view all the answers

What are the main types for calculations in volumetrics?

Oil/Condensate, Gas, and Totals Signup and view all the answers

What are the subtypes for volume calculations in volumetrics?

Bulk, Net, Pore, HCPV, STOIIP, GIIP, and Recoverable Signup and view all the answers

What variables are involved in the formulas used to calculate volumetrics options?

Porosity, water saturation, and recovery factors Signup and view all the answers

What can be generated per license boundary or per zone in volumetrics?

Area and average thickness Signup and view all the answers

What can be used to speed up later calculations in volumetrics?

Pre-calculated bulk volume Signup and view all the answers

What can be created to describe fluid contact in the grid model in volumetrics?

Discrete fluid parameter Signup and view all the answers

What choice is provided for negative cell volumes in volumetrics?

Set to zero or allowed Signup and view all the answers

How can the map layout be defined in volumetrics?

By dragging a surface into the Map Layout drop site Signup and view all the answers

What can be selected for each calculation in volumetrics?

Parameter, Zone map, and Total map Signup and view all the answers

What must be present to use license boundaries in volumetrics?

A closed, non-collapsed polygon Signup and view all the answers

What can be specified for the output location in volumetrics?

For all the maps selected in the Subtypes section Signup and view all the answers

What can be done with discrete fluid parameter in volumetrics?

Describe fluid contact in the grid model Signup and view all the answers

In volumetrics calculations, what is the dimension of GOR?

Dimensionless Signup and view all the answers

What type of file is the Document list output in the RMS Volumetrics Report?

Text file Signup and view all the answers

Which option allows for the creation of a table within RMS with results for all realizations in the Volumetrics Report?

Report table Signup and view all the answers

What does the P10 value in the Statistics tab of the Volumetric Table Viewer represent?

High side estimate Signup and view all the answers

Which tab in the Volumetric Table Viewer dialog box presents the calculated volumetric data in a table?

Raw data Signup and view all the answers

What is the purpose of the Tabular layout in the Report file?

To present data in a text file Signup and view all the answers

Which category are the volumetric units used in the RMS Volumetrics Report?

Volumetrics Signup and view all the answers

What can be toggled in the Report file output options?

Including realization number in file name Signup and view all the answers

What is the purpose of the Volumetric Table Viewer dialog box?

To present calculated volumetric data Signup and view all the answers

What do the P90 values in the Statistics tab of the Volumetric Table Viewer reflect?

Low side estimate Signup and view all the answers

What is the format of the Tabular output in the RMS Volumetrics Report?

Excel file Signup and view all the answers

What should be ensured before running the job for the RMS Volumetrics Report?

Required Import/Export unit set has been selected Signup and view all the answers

Where can maps be output to in the Data tree?

Model QC, General 2D data, Clipboard, and Zones Signup and view all the answers

What does the map increment option allow users to adjust?

Grid resolution for output maps Signup and view all the answers

Where are input variables for select volumes entered?

Variables tab Signup and view all the answers

What are the three alternative input sources for defining variables for each zone, region, or as a single value for all zones and regions?

Panel, Table, and Region model Signup and view all the answers

What can be used in Volumetrics if defined with a template based on standard contacts?

Fluid contact data from a region attribute table Signup and view all the answers

Where can users specify variables by selecting a variable class, specific variable, and subsets for which different variable values are given?

Variables tab Signup and view all the answers

What are the types of variables used as input to volume calculations?

Oil, gas, and formation variables Signup and view all the answers

How can variables used as input to volume calculations be specified?

Through constant values, surface or parameter selection, or by using a table Signup and view all the answers

Where can users specify the output as a Report file or a Report table data object?

Report file tab Signup and view all the answers

What are the associated gas and liquid units in the Report file and table linked to?

The units set for STOIIP and GIIP respectively Signup and view all the answers

What is required for grid model based output in the Zones folder?

A network structural framework Signup and view all the answers

Where can users adjust the grid resolution for output maps?

Map increment option Signup and view all the answers

Study Notes

Map Output and Volumetrics in RMS

Maps can be output to specific folders in the Data tree including Model QC, General 2D data, Clipboard, and Zones, with the latter requiring a network structural framework for grid model based output.
The map increment option allows users to adjust grid resolution for output maps, with a smaller value providing more accurate maps but slower calculations.
Input variables for select volumes are entered in the Variables tab, depending on the options selected in the Calculations tab.
Variables can be defined for each zone, region, or as a single value for all zones and regions through three alternative input sources: Panel, Table, and Region model.
Fluid contact data from a region attribute table can be used in Volumetrics if defined with a template based on standard contacts.
The Variables tab lists the formulas to be used for selected calculations, with options depending on the input and calculations chosen in previous tabs.
Users can specify variables by selecting a variable class, specific variable, and subsets for which different variable values are given.
Variable types include oil, gas, and formation variables, each with specific variables and unit measures, defined through the Unit Set Selector in the Tools menu.
Variables used as input to volume calculations can be specified through constant values, surface or parameter selection, or by using a table with the same format as specified in the Table Link section of the Volumetrics dialog box.
In the Report file tab, users can specify the output as a Report file or a Report table data object, with calculated values in units taken from the Import/Export unit set, allowing generation of reports in specified units.
Associated gas and liquid units in the Report file and table are linked to the units set for STOIIP and GIIP respectively, which are specified in the Unit Set Selector dialog box accessed from the RMS menu bar under Tools.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Test your knowledge of Map Output and Volumetrics in RMS with this quiz. Explore topics such as grid resolution, input variables, fluid contact data, formulas, variable types, and report file settings.