Quality Control of Trial Products Quiz

What is the purpose of the IPQC process monitoring in trial production?

To audit the trial production line for any abnormalities

What is the consequence if the first pass rate for printing solder paste board does not meet the standard?

Tracking for 1 hour without any follow-up measures

What is the threshold for the furnace front AOI DVT pass-through rate to trigger an action?

Lower than 50% for 2 consecutive hours

How many PCS of solder paste board error trigger a tracking without cause and improvement measures in visual inspection after furnace?

5 PCS with poor parity numbers Signup and view all the answers

What happens if X-RAY inspection is conducted?

Defects are checked at a deeper level Signup and view all the answers

What is the purpose of the Quantity Summary Evaluation Meeting mentioned in the text?

To finalize the project score and discuss trial production improvement plans. Signup and view all the answers

When does SMT Quality publish the Quantity Summary Report according to the text?

After tracking the implementation of improvement measures. Signup and view all the answers

Who informs the SMT Minister and Supervisor of the final time of the project summary meeting?

NPI Signup and view all the answers

What are the main review points of the new model's mass production summary according to the text?

Improvement of trial production leftover Signup and view all the answers

What must each module do within two days after receiving the quality notice based on the text?

Summarize indicators, scores, problem points, and feedback quality. Signup and view all the answers

What is the purpose of collecting problem points improvement plans from responsible persons before the meeting?

To pre-score the project and inform senior management. Signup and view all the answers

What is the reason for tracking 1H without cause in the context of solder paste board quality control?

BB elongated/defective headrest *2PCS Signup and view all the answers

In AOI quality control, what action is taken if the team leader is found to be abnormal?

A notification is sent after confirmation by the team leader. Signup and view all the answers

What is the requirement for X-RAY inspection in the visual inspection process, according to the text?

For every 100 stacking models produced, X-RAY needs to be sent to X-RAY machines. Signup and view all the answers

What action is taken in scoreboard quality control if shipment and production are suspended without reasons?

Quality team leader and above will lift the ban. Signup and view all the answers

What warrants sending models for X-RAY inspection after production in the visual inspection process?

The first frame of 200 ordinary models produced. Signup and view all the answers

What kind of soldering board quality issue leads to a stop in pulling or single-chip tracking for 1 hour with no reason for improvement measures?

*2PCS stop pulling or single-chip tracking Signup and view all the answers