PVC Profile Maintenance Guide
48 Questions
0 Views

PVC Profile Maintenance Guide

Created by
@ComprehensiveActinium6371

Podcast Beta

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which profile has the highest value for $Iy$ in cm$^4$?

  • P 2539
  • P 3291
  • P 2533 (correct)
  • P 2565

    • What is the bending rigidity $E.Ix$ for profile P 2565 in GN.mm$^2$?

  • 0.11
  • 0.51 (correct)
  • 0.25
  • 1.0

    • Which of the following profiles has an $Iy$ value of 0.18 cm$^4$?

  • P 2565
  • P 3292
  • P 2533
  • P 2539 (correct)

    • What dimension is associated with the profile P 2565?

    <p>11.2 x 18.2</p> Signup and view all the answers

    Which profile has an $E.Iy$ value of 0.01 GN.mm$^2$?

    <p>P 2539</p> Signup and view all the answers

    What is the $Ix$ value (cm$^4$) for profile P 2533?

    <p>52.46</p> Signup and view all the answers

    Which profile has the lowest $E.Ix$ value?

    <p>P 3292</p> Signup and view all the answers

    Which profile exhibits a cross-sectional area of $3.0$ cm?

    <p>P 2539</p> Signup and view all the answers

    What does the notation 'RSR' refer to in the document?

    <p>Reinforcement Structural Ratio</p> Signup and view all the answers

    Which product is associated with a glazing rebate seal?

    <p>P 3292</p> Signup and view all the answers

    What is the E.Ix value for product P 2845?

    <p>2.93 GN.mm²</p> Signup and view all the answers

    How does the Ix for product P 2869 compare to P 2845?

    <p>It is higher than P 2845.</p> Signup and view all the answers

    What is the importance of the values 'I_x' and 'I_y' in this context?

    <p>They represent bending stiffness of the profiles.</p> Signup and view all the answers

    For which profile is the 's' value indicated as 1.0?

    <p>P 2845</p> Signup and view all the answers

    What does the 's' value generally denote in the document?

    <p>Wall thickness</p> Signup and view all the answers

    Which profile has the lowest Iy value?

    <p>P 2539</p> Signup and view all the answers

    What is the recommended way to clean PVC profiles?

    <p>Use a soft damp sponge with a non-abrasive household cleaner.</p> Signup and view all the answers

    Which of these cleaning agents should NOT be used on PVC profiles?

    <p>Bleach</p> Signup and view all the answers

    What product is recommended for annual polishing of PVC profiles?

    <p>PVC Cleanup P 956.</p> Signup and view all the answers

    What should be done for scratches on PVC profiles according to the maintenance guidelines?

    <p>Treat difficult stains with Cleanup P 956.</p> Signup and view all the answers

    Which of the following substances is considered safe for cleaning coated profiles?

    <p>Household water-based cleaner</p> Signup and view all the answers

    What kind of maintenance kit is suggested for PVC profiles?

    <p>Deceuninck P 964 maintenance kit.</p> Signup and view all the answers

    Which cleaning method is discouraged for PVC profiles?

    <p>Dry cleaning profiles.</p> Signup and view all the answers

    Which product should not be used on PVC colored in the mass?

    <p>Acrylic paint.</p> Signup and view all the answers

    What is the page number for the maximum dimensions in the window preparation section?

    <p>57</p> Signup and view all the answers

    Which section covers the insertion of reinforcement sections during the fabrication process?

    <p>3.2 Inserting reinforcement sections</p> Signup and view all the answers

    Which type of door hardware is covered in section 3.5?

    <p>Door hinges</p> Signup and view all the answers

    Which sub-section provides guidelines for measuring the window?

    <p>2.3 Measuring of the window</p> Signup and view all the answers

    What is discussed in section 3.6 of the fabrication process?

    <p>Use of accessories</p> Signup and view all the answers

    Where would you find information on 'Drainage' within the fabrication process?

    <p>3.3 Machining</p> Signup and view all the answers

    Which page number pertains to the 'Processing dark coloured profile'?

    <p>95</p> Signup and view all the answers

    What information can be found in section 2.5?

    <p>Cutting sizes</p> Signup and view all the answers

    Which of the following is NOT included in the 'Use of accessories' section?

    <p>Casement hardware</p> Signup and view all the answers

    Which section outlines the guidelines for door installation?

    <p>Door installation</p> Signup and view all the answers

    What type of window is specifically mentioned in the hardware section?

    <p>Tilt &amp; turn</p> Signup and view all the answers

    Which of the following is the focus of sub-section 3.4?

    <p>Frame assembly</p> Signup and view all the answers

    Where can one find the guidelines for maximum dimensions in door installation?

    <p>2.4 Maximum dimensions</p> Signup and view all the answers

    Which section includes information on 'End milling transom mechanical joint'?

    <p>3.3 Machining</p> Signup and view all the answers

    What is the value of $E.Ix$ for profile P 2560?

    <p>1.21 GN.mm²</p> Signup and view all the answers

    Which profile has the highest $Iy$ value?

    <p>P 2537</p> Signup and view all the answers

    Calculate the $Ix$ value for profile P 2577.

    <p>0.58 cm⁴</p> Signup and view all the answers

    Which of the following profiles has a $E.Iy$ value of 0.41 GN.mm²?

    <p>P 2561</p> Signup and view all the answers

    What is the dimension of profile P 2561?

    <p>21.0 x 21.7 x 1.23 m</p> Signup and view all the answers

    Which profile has an $E.Ix$ value closest to 1.00 GN.mm²?

    <p>P 2561</p> Signup and view all the answers

    What is the $Iy$ value for profile P 2537?

    <p>45.46 cm⁴</p> Signup and view all the answers

    Which profile has the lowest $Ix$ moment of inertia?

    <p>P 2561</p> Signup and view all the answers

    What is the value of $E.Iy$ for profile P 2577?

    <p>0.01 GN.mm²</p> Signup and view all the answers

    What is the length of profile P 2537?

    <p>3.0 m</p> Signup and view all the answers

    Study Notes

    Maintenance

    • PVC profiles are generally resistant to environmental influences but require minimal maintenance.
    • Clean PVC profiles with a soft damp sponge and non-abrasive, water-based household cleaner.
    • Avoid using abrasive, corrosive liquids, chemical solvents, and ammonia or chlorine-based products.
    • It is recommended to polish PVC profiles annually with PVC Cleanup P 956.
    • Use the Deceuninck P 964 maintenance kit to service seals, oil hardware, and clean PVC profiles.
    • Never paint PVC profiles and do not dry clean profiles for scratches or scrapes.

    DECOROC STRUCTURE & METALLIC STRUCTURE

    • The guidelines for PVC profiles also apply.
    • Clean with a household water-based cleaner (exclude bleach and ammonia) using a soft sponge.
    • Avoid aggressive products such as methylene chloride, hydrogen peroxide, cellulose thinner, and acetone.

    P 2533 Profile Sheet

    • Ix: 52.46 cm4
    • Iy: 31.35 cm4
    • E.Ix: 1.41 GN.mm²
    • E.Iy: 0.84 GN.mm²

    P 2537 Profile Sheet

    • Ix: 58.45 cm4
    • Iy: 45.46 cm4
    • E.Ix: 1.58 GN.mm²
    • E.Iy: 1.23 GN.mm²

    P 2560 Reinforcement

    • s: 1.5 mm
    • Ix: 0.59 cm4
    • Iy: 0.36 cm4
    • E.Ix:  1.21 GN.mm²
    • E.Iy: 0.74 GN.mm²

    P 2561 Reinforcement

    • s: 1.5 mm
    • Ix: 0.007 cm4
    • Iy: 0.20 cm4
    • E.Ix: 0.01 GN.mm²
    • E.Iy: 0.41 GN.mm²

    P 2577 Reinforcement

    • s: 3.0 mm
    • Ix: 1.00 cm4
    • Iy: 0.58 cm4
    • E.Ix: 0.03 GN.mm²
    • E.Iy: 0.01 GN.mm²

    P 2845 Reinforcement

    • s: 1.0 mm
    • Ix: 1.43 cm4
    • Iy: 0.20 cm4
    • E.Ix: 2.93 GN.mm²
    • E.Iy: 0.41 GN.mm²

    P 2869 Reinforcement

    • s: 2.0 mm
    • Ix: 2.49 cm4
    • Iy: 0.31 cm4
    • E.Ix: 5.10 GN.mm²
    • E.Iy: 0.64 GN.mm²

    P 2539 Reinforcement

    • s: 3.5 mm
    • Ix: 2.76 cm4
    • Iy: 0.23 cm4
    • E.Ix: 0.07 GN.mm²
    • E.Iy: 0.01 GN.mm²

    P 3291 & 3292 Accessories

    • Back of frame
    • Glazing rebate seal
    • Traditional 2500

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Related Documents

    Traditional 2500 Technical Manual 2019 PDF

    Description

    This quiz covers the essential maintenance practices for PVC profiles, including cleaning methods and recommended products. It also highlights the characteristics of different profiles, particularly the P 2533 Profile Sheet. Ideal for those looking to understand the upkeep of PVC structures.

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser