PSVR2 Setup and Settings Guide
10 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What action should be taken to adjust the lens distance on the VR headset?

  • Press and hold the button at the top of the headset to push the scope snug around your face
  • Use the dial on the top left of the headset until your eyes are positioned correctly within the centre of each lens (correct)
  • Press and hold the button at the back of the headband to loosen it
  • Pull out the scope by pressing and holding the large button at the front of the headset
  • What is the correct process for setting up eye tracking on the VR headset?

  • Hold the VR headset at face level and press the Function button to start checking brightness
  • Follow on-screen instructions to track a red dot with your eyes without moving your head (correct)
  • Select 'Start Scanning' and look around the room
  • Press and hold the button at the back of the headband to loosen it
  • How can you change most of the main settings of the VR2 headset?

  • By selecting Remote Viewer from the Apps dropdown
  • By pressing and holding the Options button to recentre your view
  • By selecting 'Start Scanning' and looking around the room
  • By pressing the PlayStation button on either controller to bring up the VR2 quick settings card (correct)
  • What should be done to enable TRC Check Notifications for identifying major performance issues?

    <p>Select Debug Settings from the Home screen, then select System &gt; TRC Check Notifications &gt; change dropdown to Enable</p> Signup and view all the answers

    How can you record media showing what each eye sees individually in Target Manager?

    <p>Select Remote Viewer from Apps dropdown, then select Tap Point from top taskbar, and choose Main Only</p> Signup and view all the answers

    Is it necessary to ensure the room is well-lit but with minimal direct sunlight before setting up the VR headset?

    <p>True</p> Signup and view all the answers

    To adjust the lens distance, the dial on the top left of the headset should be turned until the eyes are positioned correctly within the center of each lens.

    <p>True</p> Signup and view all the answers

    To set the play area, the user is required to select 'Start Scanning' and look around the room at all the walls, floor, and ceiling.

    <p>True</p> Signup and view all the answers

    To enable TRC Check Notifications for identifying major performance issues, one needs to select Debug Settings from the Home screen, then select System > TRC Check Notifications > change the dropdown to Enable.

    <p>True</p> Signup and view all the answers

    In most instances, Target Manager works exactly the same with VR as it does with non-VR titles.

    <p>False</p> Signup and view all the answers

    More Like This

    Tales of Zestiria: Virtual Reality Quiz
    7 questions
    Virtual Reality Technology Quiz
    18 questions
    Future of Gaming 2024
    10 questions
    Introduction to Virtual Reality
    32 questions
    Use Quizgecko on...
    Browser
    Browser