Proper Handle Sizing and Gripping Techniques Quiz

Play an AI-generated podcast conversation about this lesson

What system do HEAD and Völkl offer to make it easy to change from any grip size to another?

3D printing

Pallets (correct)

Grip molding

Heat shrink sleeves

What is a method used for grip application by many professional customizers but is expensive for the average player?

Grip molding (correct)

Pallets

3D printing

Heat shrink sleeves

When using a heat shrink sleeve for grip application, what should you ensure regarding its length?

Trim it to the longest possible length

Use it without trimming

Leave excess material at both ends

Trim it to the proper length (correct)

What tool is recommended to apply heat while shrinking the sleeve down for grip application?

Heat pistol or paint stripper gun Signup and view all the answers

Why is it advised to leave some material within 2-3 mm of the butt during grip application?

To cover it when applying a new grip Signup and view all the answers

What can be applied to help prevent grips from slipping on the slick surface of heat-shrink sleeves?

Double-sided tape Signup and view all the answers

What is the recommended balance point of an unstrung tennis racket compared to a strung racket?

9-10 millimeters lower Signup and view all the answers

Which technique should be used to inspect and prepare the frame for the installation of new bumpers/grommets?

Removing the string and grommets without scratching or marring the frame Signup and view all the answers

What is the maximum time allotted for the applicant to complete the bumper/grommet removal and replacement process?

20 minutes Signup and view all the answers

Which of the following is the MOST important step in the stringing process to maintain the integrity of the string and frame?

Mounting the frame on the machine to prevent any marring, distortion or frame damage Signup and view all the answers

What is the maximum time allotted for the applicant to complete the restringing process for the GRSA-CPS certification?

50 minutes Signup and view all the answers

Which of the following is the MOST important step in the stringing process to ensure a top-quality restring?

Installing the string according to the frame manufacturer's specifications in accordance with GRSA guidelines Signup and view all the answers

What is the maximum allowed space between the grip end and the butt edge during the grip replacement process?

2 mm Signup and view all the answers

Which of the following is NOT a required step in the proper application of a replacement grip?

Wraps the grip for a left-hander with the appropriate overlap Signup and view all the answers

What is the maximum allowed time to complete the handle sizing and grip replacement process?

20 minutes Signup and view all the answers

Which of the following is not a key question a GRSA Certified Pro Master Stringer should ask a customer when fitting a racket?

What is your favorite color for the racket frame? Signup and view all the answers

During the grip replacement process, what is the maximum allowed misalignment of the build-up sleeve from the butt end?

3 mm Signup and view all the answers

Which of the following is a required step in the proper application of a replacement grip?

Completely covers the build-up sleeve with the replacement grip Signup and view all the answers