Preventing Water Hammer in Steam Plants
21 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What can cause sudden stoppage in a fluid system?

  • Control valves (such as solenoid valves) opening rapidly
  • Manual valves being opened quickly
  • Swing check valves closing suddenly when pumps stop or control valves close quickly (correct)
  • Pumps starting suddenly, with discharge valves fully open

What leads to sudden fluid acceleration in a fluid system?

  • Manual valves being opened quickly
  • Pumps starting suddenly, with discharge valves fully open (correct)
  • Saturated steam and saturated water (condensate) co-existing in steam or condensate lines
  • Control valves (such as a solenoid valve) opening rapidly

How can water hammer in fluid systems be prevented?

  • Operating equipment carefully
  • Redesigning piping systems
  • Installing piping components that reduce or eliminate water hammer (correct)
  • All of the above

What should be done to prevent excess steam and water loss during warm-up of steam lines?

<p>Use small warm-up lines, rather than main isolation valves (C)</p> Signup and view all the answers

What is a design solution to prevent or reduce the severity of water hammer in steam systems?

<p>Install no-slam design check valves (C)</p> Signup and view all the answers

What should be done if water hammer occurs while placing a boiler on-line?

<p>Close the non-return valve at once (C)</p> Signup and view all the answers

What should be done if water hammer occurs in the boiler house during routine operation?

<p>Check the boiler water level and then lower it with the boiler blowoff valves (D)</p> Signup and view all the answers

What action should be taken if a malfunctioning steam trap is identified in the plant?

<p>Isolate and remove the trap for repair or replacement following plant lockout and tagout procedures (A)</p> Signup and view all the answers

What is one of the recognizable signs of water hammer?

<p>Loud noises and shaking of piping systems (C)</p> Signup and view all the answers

When does water hammer occur in steam systems?

<p>When steam is first admitted into cold steam lines or heat exchangers (A)</p> Signup and view all the answers

What causes water hammer in fluid systems?

<p>Sudden acceleration of fluid (A)</p> Signup and view all the answers

What is the consequence of severe water hammer?

<p>Pipe failures (C)</p> Signup and view all the answers

What is the primary focus of this objective in relation to water hammer?

<p>Identify, prevent, and respond to water hammer (D)</p> Signup and view all the answers

When can the noises associated with water hammer be small pings or loud bangs?

<p>Depending on the severity of the water hammer (C)</p> Signup and view all the answers

Why is it imperative that operators are familiar with methods of water hammer prevention?

<p>To prevent costly pipe failures caused by water hammer (A)</p> Signup and view all the answers

What is the main focus of this objective?

<p>Preventing water hammer (C)</p> Signup and view all the answers

How is water hammer recognizable?

<p>As a series of loud noises and shaking of piping systems (B)</p> Signup and view all the answers

What causes water hammer when it occurs during the admission of steam into cold steam lines?

<p>Sudden acceleration of fluid (B)</p> Signup and view all the answers

What can be the consequences of water hammer?

<p>Mild shockwaves to pipe failures (B)</p> Signup and view all the answers

Why is it imperative that operators are familiar with methods of water hammer prevention?

<p>To prevent costly and dangerous effects (D)</p> Signup and view all the answers

When does water hammer occur due to the sudden stoppage of pumps?

<p>When discharge check valves close suddenly (D)</p> Signup and view all the answers

More Like This

Use Quizgecko on...
Browser
Browser