Phlebotomies and Blood Sampling Monitoring
15 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What tubes were obtained at the end of the blood sampling for the 4-hour interval?

  • Three serum tubes and one plasma tube
  • Two citrate tubes and two EDTA tubes
  • Two SE tubes and two HP tubes (correct)
  • One SE tube, one HP tube, one EDTA tube, and one citrate tube

Which type of tube is commonly used for collecting serum samples?

  • EDTA tubes
  • Citrate tubes
  • SE tubes (correct)
  • HP tubes

What is the purpose of using heparin plasma tubes?

  • To measure glucose levels
  • To prevent blood clotting (correct)
  • To test for coagulation factors
  • To separate serum from whole blood

What is the main purpose of venipuncture in the context of this text?

<p>To monitor possible effects related to blood sampling (B)</p> Signup and view all the answers

Which vacuum tube is NOT mentioned in the context of this text?

<p>Plain/red-top tubes (D)</p> Signup and view all the answers

What is the primary method used to collect blood from healthy volunteers in the text?

<p>Venipuncture (B)</p> Signup and view all the answers

Which type of tubes were used for blood collection in the text?

<p>Serum tubes (A)</p> Signup and view all the answers

What was the condition of the tubes used for blood collection in the study?

<p>Either filled or underfilled to approximately 50% (A)</p> Signup and view all the answers

After collection, what was done with the tubes in the study?

<p>Processed directly or stored at room temperature for 4 hours (A)</p> Signup and view all the answers

What type of blood collection tube contains heparin for plasma preparation?

<p>Heparin plasma tubes (D)</p> Signup and view all the answers

What was the gauge of the needle used for blood collection in the experimental setting?

<p>21G (A)</p> Signup and view all the answers

Which company manufactured the Blood Collection Set + Holder used in the experiment?

<p>Greiner Bio-One GmbH (A)</p> Signup and view all the answers

What was the length of the tubing used for blood collection in the experimental setting?

<p>7 1/2 inches (B)</p> Signup and view all the answers

Which type of tube was not mentioned in the experimental setup for blood collection?

<p>EDTA tubes (D)</p> Signup and view all the answers

In what procedure was the equipment mentioned most likely to be used?

<p>Blood draw or venipuncture (D)</p> Signup and view all the answers

More Like This

Blood Collection Safety Quiz
4 questions

Blood Collection Safety Quiz

IrreproachableConnemara avatar
IrreproachableConnemara
Phlebotomist Employment in Hospitals
18 questions
Use Quizgecko on...
Browser
Browser