Petro Rabigh: PMMA Vicat Softening Temperature Work Instruction Quiz

The effective date of the document PR/QCD/QCP2/WI-309 is 12/17/2022?

The section head who reviewed the document is Muhammad Hasbi J. Rajab?

The purpose of the document is mentioned in section 1 of the table of content?

The document includes a process flow chart in section 6?

The initiating person's job title is mentioned as RAKESHKUMAR P. THAKKAR?

The manager of the Quality Control Department who approved the document is Adil I. Ghanemi?

The Vicat Softening Temperature test is applicable to various types of plastic materials.

The Vicat Softening Temperature test measures the thermal stability of PMMA.

The Vicat Softening Temperature test involves heating the specimen at a rate of 50°C/hour.

Safety goggles, heat resistance gloves, and safety shoes are not required for conducting the Vicat Softening Temperature test.

The Vicat Softening Temperature test requires the use of a Tinius Olsen 303HDTM Heat Distortion Tester.

The Vicat Softening Temperature test involves the use of silicone oil with a viscosity of 50 CST.

The responsibility of preparing the PMMA test specimen lies with the Shift Supervisor.

The Vicat Softening Temperature test requires the application of a 6N weight first and then a 40N weight on the sample holder.

The Vicat Softening Temperature results are recorded in whole numbers in degrees Celsius.

Proper housekeeping is not required after completing the analysis in the Vicat Softening Temperature test.

The Vicat Softening Temperature test involves cooling the specimen by turning a nob from right to left after analysis is completed.

The Vicat Softening Temperature test requires waste disposal to be performed by the Section Head.