PD 1096 National Building Code of the Philippines: General Provisions Quiz

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the maximum allowable percentage of each side for firewalls in the R3 A category?

90%

85% (correct)

75%

80%

What is the maximum height allowed for firewalls in the R5 category for the rear side?

3.20m

14m (correct)

Two storeys

8 storeys

For allowable firewalls in category R4, what is the total percentage that should not exceed for both sides combined?

50% (correct)

60%

70%

40%

What does TGFA stand for in the context of building floor areas?

Total Gross Floor Area Signup and view all the answers

In the R3 B category, what is the maximum allowable percentage of a rear side if its width is only 4m?

100% Signup and view all the answers

What is the maximum allowable total perimeter percentage for firewalls in category R5, option A?

65% Signup and view all the answers

What is the purpose of the National Building Code as stated in the text?

Provide minimum standards for building design Signup and view all the answers

Which of the following is NOT covered by the National Building Code according to the text?

Construction of traditional dwellings Signup and view all the answers

In the context of the National Building Code, what does an 'addition' to a building involve?

Altering the structure without increasing height or area Signup and view all the answers

What does 'alteration' mean in the context of building construction based on the text?

Changing the location of existing utilities Signup and view all the answers

Which of the following is considered part of 'construction' under the National Building Code?

Assembly of building components and installation of utilities Signup and view all the answers

What does the National Building Code NOT regulate regarding buildings?

Design and location of public structures only Signup and view all the answers

What is the purpose of renovation in relation to a building/structure?

To increase the value and improve the aesthetic quality of the building Signup and view all the answers

What defines a conversion in the context of buildings/structures?

Changing the use or occupancy of a building/structure to meet different requirements Signup and view all the answers

What constitutes repair in the context of buildings/structures?

Undertaking remedial work on damaged or deteriorated portions of a building/structure Signup and view all the answers

When does demolition of a building/structure occur?

For systematic dismantling or destruction of a building/structure, in whole or in part Signup and view all the answers

Which type of building/structure is considered an ancillary building structure?

A secondary structure located within the same premises for incidental use Signup and view all the answers

What does a building permit authorize in relation to construction?

Proceeding with construction after ensuring plans and documents comply with the Code Signup and view all the answers

Study Notes

Firewall Categories and Regulations

Maximum allowable percentage for each side of firewalls in R3 A category is 30%.
For R5 category, the maximum height allowed for rear side firewalls is 4.5 meters.
In R4 category, total percentage for allowable firewalls on both sides combined must not exceed 50%.

Building Codes and Definitions

TGFA stands for Total Gross Floor Area in the context of building floor areas.
For R3 B category, if the width is 4 meters, the maximum allowable percentage of a rear side is 80%.
Maximum allowable total perimeter percentage for firewalls in R5, option A is 40%.

National Building Code

The National Building Code aims to establish standards for the construction and occupancy of buildings to ensure safety, health, and accessibility.
Topics not covered by the National Building Code include planning and zoning regulations.
An 'addition' to a building refers to the expansion or enlargement of an existing structure.
'Alteration' involves modifying any part of a building, such as changes to structure, layout, or systems.

Construction, Renovation, and Other Definitions

Under the National Building Code, components considered part of 'construction' include erecting a new building or undertaking significant renovations.
The code does not regulate aesthetic aspects of buildings, such as color or design style.
Renovation aims to improve or restore a building/structure, making it more functional or modern.
A 'conversion' changes a building's use without altering its footprint or physical structure.
Repair refers to restoring a building/structure to a safe and usable condition after damage or wear.
Demolition occurs when a building/structure is intentionally taken down or dismantled.
Ancillary building structures typically include facilities that support the main function of a building, such as garages or sheds.
A building permit authorizes construction activities, ensuring compliance with legal and safety standards.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Test your knowledge on the purpose and scope of application of the National Building Code of the Philippines as outlined in Rule 1 - General Provisions. Explore minimum standards, requirements, and regulations for building design, construction, and maintenance.