Questions and Answers
If proper clearance can be determined, vehicles can be driven between the wing tips of two aircraft.
False
Fuel or brake system leaks, no matter how minor, will prevent air shipment.
True
Where on a pallet should you ensure its scale weight is clearly marked?
Both 108-inch sides of the pallet
Due to taxiing aircraft and material handling equipment (MHE) movement on the flightline, which of the following should be escorted to and from aircraft?
Signup and view all the answers
Vehicle drivers will not back a vehicle toward or into an aircraft until spotter personnel are in place and directed by a guide.
Signup and view all the answers
When conducting an ERO operation with a C-5 aircraft, vehicles and personnel exiting via the forward or aft ramp will proceed on a direct line with the fuselage at least _____ feet before turning, or at least _______ feet before stopping.
Signup and view all the answers
What issues cargo airlift certifications?
Signup and view all the answers
A _____________ will be pre-positioned to prevent a vehicle from striking an aircraft.
Signup and view all the answers
In which phase of the Departure Airfield Operations is the Joint Inspection conducted and discrepancies corrected?
Signup and view all the answers
What is the fuel limit in vehicles loaded on the KC-10 and KC-135 aircraft?
Signup and view all the answers
When marking the center of balance on a vehicle, what information will be shown on the horizontal portion of the 'T'?
Signup and view all the answers
Which of the following are responsible for activities conducted within the Call Forward Area?
Signup and view all the answers
Any vehicle that requires rolling shoring also requires parking shoring.
Signup and view all the answers
Married pallets do not require center of balance marking.
Signup and view all the answers
Which of the following cargo items require you to mark CB?
Signup and view all the answers
The DD Form 2775 can contain classified information only if approved by the installation commander.
Signup and view all the answers
How many rings may be worn by a load team member?
Signup and view all the answers
Which of the following are specific deploying unit responsibilities within the AHA?
Signup and view all the answers
The Alert Holding Area (AHA) is the vehicle, equipment, supply, and personnel control area, under the control of the A/DACG.
Signup and view all the answers
Mark each equipment item with the proper ______________ and _____________.
Signup and view all the answers
In the call forward area, cargo and equipment loads must be available for joint inspection (JI) _______ hours prior to departure; and personnel must be available for passenger briefings and manifest checks ________ hours prior to departure.
Signup and view all the answers
__________ is responsible for certifying ammunition, explosives and other hazardous materials for movement on DoD owned and controlled aircraft.
Signup and view all the answers
Study Notes
Vehicle and Aircraft Safety
- Determine clearance to allow vehicle movement between aircraft wing tips.
- Minor fuel or brake system leaks prevent air shipment for safety.
- Vehicle drivers must wait for spotter personnel before reversing near aircraft.
Pallet Handling and Marking
- Scale weight should be clearly marked on both 108-inch sides of the pallet.
- Mark center of balance on vehicles with gross weight information displayed on the "T."
Passenger and Cargo Handling
- Passengers must be escorted around taxiing aircraft and material handling equipment.
- Vehicles loaded on KC-10 and KC-135 must not exceed 1/2 tank fuel limit.
- Specific cargo items requiring center of balance marking include all vehicles, any item with a center of balance not at the center, and cargo items 10 feet or longer.
Responsibilities and Procedures
- Joint Inspection in the Call Forward Area corrects discrepancies before departure.
- The deploying unit certifies hazardous materials for movement on DoD aircraft.
- The A/DACG oversees the Alert Holding Area (AHA) for control of personnel, equipment, and supplies.
Logistics Operations
- In ERO operations with C-5 aircraft, vehicles must maintain specific distance from fuselage while maneuvering.
- Load discrepancies must be corrected during pre-inspection, and necessary documentation provided to A/DACG.
Regulations and Certifications
- ATTLA is responsible for issuing cargo airlift certifications.
- DD Form 2775 requires approval for including classified information.
- Load team members are restricted to wearing none rings while on duty.
Inspection and Availability Timings
- Cargo and equipment loads must be ready for Joint Inspection 6 hours prior to departure.
- Personnel must be available for passenger briefings and manifest checks 3 hours prior to departure.
Safety Equipment
- Wheel chocks are used to prevent vehicles from striking aircraft and must be pre-positioned.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge on the Pallet Build-up Phase 2 with these flashcards. Each card presents key concepts, including regulations regarding aircraft clearance and safety measures in air shipment. Perfect for those looking to enhance their understanding of cargo handling.
