Podcast
Questions and Answers
What is the default value of the 'target-scope' for a static route in MikroTik RouterOS?
What is the default value of the 'target-scope' for a static route in MikroTik RouterOS?
- 255
- 1 (correct)
- 10
- 30
Why is the MikroTik RouterOS configuration shown in the provided output invalid?
Why is the MikroTik RouterOS configuration shown in the provided output invalid?
- The configuration is valid, there is no issue.
- The router has duplicate IP addresses assigned to different interfaces. (correct)
- The network type for the IP addresses is incorrect.
- The output is incomplete, additional information is required to determine the validity.
In MikroTik RouterOS, where is recursive routing applied?
In MikroTik RouterOS, where is recursive routing applied?
- It is possible in all routing tables installed in a router.
- It is only possible on the x86 platform.
- It is only possible in the main routing table. (correct)
- It is not possible in MikroTik RouterOS.
If six routers are running OSPF and connected using point-to-point network types, how many Designated Routers (DR) are there?
If six routers are running OSPF and connected using point-to-point network types, how many Designated Routers (DR) are there?
How can comments be added to a dynamic route in MikroTik RouterOS?
How can comments be added to a dynamic route in MikroTik RouterOS?
Flashcards
OSPF and BGP on the same router
OSPF and BGP on the same router
OSPF (Open Shortest Path First) and BGP (Border Gateway Protocol) can coexist on the same router configuration.
Default value of 'target-scope'
Default value of 'target-scope'
The default value of 'target-scope' for a static route is 255.
Duplicate IP addresses
Duplicate IP addresses
Having two identical IP addresses in the same network configuration leads to invalid setups.
Recursive routing in MikroTik
Recursive routing in MikroTik
Signup and view all the flashcards
Designated Routers in OSPF
Designated Routers in OSPF
Signup and view all the flashcards
Study Notes
OSPF and BGP Configuration
- It is possible to configure both OSPF and BGP on the same router.
Static Route Target Scope
- The default value for the target-scope of a static route is 255.
Invalid IP Configuration
- The configuration shown (with duplicate IPs) is invalid. The output of
/ip address printreveals duplicate 10.10.10.1 addresses on interfaces pppoe-1 and pppoe-2.
Recursive Routing in MikroTik
- Recursive routing in MikroTik RouterOS is possible in all routing tables installed in the router.
Designated Routers in OSPF Network
- In a network of 6 OSPF routers connected via point-to-point links, there will be 6 Designated Routers.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
