Olympic Films and Nazi Era

Chorin, Germany

microphone

the first encountered element or interface

<p>E.C. Wente</p> Signup and view all the answers

<p>dynamic (moving-coil) devices</p> Signup and view all the answers

<p>measured 9cm in diameter, approximately 40cm high and weighed in at nearly 3kg (6.6lbs)</p> Signup and view all the answers

<p>Telefunken</p> Signup and view all the answers

<p>CMV 3 microphones</p> Signup and view all the answers

<p>It was destroyed by Allied bombing attacks</p> Signup and view all the answers

<p>M 7 capsule</p> Signup and view all the answers

<p>U 47 microphone</p> Signup and view all the answers

<p>Sennheiser plant in Hannover, Germany</p> Signup and view all the answers

<p>The development of the nickel-cadmium battery</p> Signup and view all the answers

<p>Heilbronn, Germany</p> Signup and view all the answers

<p>Deutsche Edison Accumularoren DEAC</p> Signup and view all the answers

<p>Neumann developed a variable direct drive using an electric motor as a direct extension of the turntable spindle.</p> Signup and view all the answers

<p>Improvements in materials and procedures were adapted to provide stereo recording and LP (long-play) recordings.</p> Signup and view all the answers

<p>Neumann developed a process for manufacturing nickel-cadmium batteries, which are essential for many modern electronic devices.</p> Signup and view all the answers

<p>Sennheiser Electronic GmbH &amp; Co. assumed control of Georg Neumann GmbH on January 1, 1991.</p> Signup and view all the answers

<p>Polar patterns refer to the directionality of microphones and how they pick up sound.</p> Signup and view all the answers

<p>A cardioid pickup pattern captures sound in front of the microphone and offers rejection in the rear.</p> Signup and view all the answers

<p>An omnidirectional microphone picks up sound equally from all directions: in front, behind, and from the sides.</p> Signup and view all the answers

<p>A modeling microphone is a type of microphone that allows you to use software to emulate the sound and character of a variety of classic microphones.</p> Signup and view all the answers

<p>Some examples of modeling microphones are Slate's ML-1 condenser mic and Townsend Labs Sphere L22.</p> Signup and view all the answers

<p>Practice is important in recording music at home because it helps you become familiar with the tools, techniques, and the craft of recording.</p> Signup and view all the answers

<p>The purpose of a pop filter is to reduce plosives, or popping noises caused by puffs of air when making P and B sounds.</p> Signup and view all the answers

<p>Stereo mic’ing is a technique that involves using two microphones to capture sound, preferably of the same make and model, to add depth and space to a recording and broaden the frequency range.</p> Signup and view all the answers

<p>The spaced pair method is a simple technique for stereo recording where two microphones are set to cardioid or omni and positioned at the same angle, height, and distance from the sound source, roughly three to ten feet apart.</p> Signup and view all the answers

<p>The 3:1 rule is a guideline in stereo mic’ing that states the second microphone should be placed three times the distance from the first microphone as the first microphone is from the sound source.</p> Signup and view all the answers

<p>Dynamic, condenser, ribbon</p> Signup and view all the answers

<p>Cardioid</p> Signup and view all the answers

<p>LDCs have a bigger capsule and capture more low-end, while SDCs tend to be more accurate and produce more neutral and natural-sounding recordings.</p> Signup and view all the answers

<p>The proximity effect refers to the increase in low frequencies when a microphone is placed closer to the sound source.</p> Signup and view all the answers