4AE3 U4 C2 Review

Play an AI-generated podcast conversation about this lesson

What is the main purpose of an Occupational Health and Safety (OH&S) program?

To provide general guidelines for safe work

To prevent work-related accidents and occupational diseases (correct)

To respond to emergencies only

To identify hazards but not control them

What are the sources of guidelines and requirements for safe work in Canada?

The CCOHS website, CSA guidelines, and jurisdictional requirements (correct)

The Occupational Health and Safety programs only

Only the Canadian Centre for Occupational Health and Safety (CCOHS) website

Only the Canadian Standards Association (CSA) guidelines

Why are plant safety programs required by law?

To comply with international safety standards

Because federal, provincial, and territorial laws require them (correct)

To provide general guidelines for safe work

To meet the specific needs of industrial plant sites

What is unique about each industrial plant site's Occupational Health and Safety program?

Each site has its own specific health and safety program focuses and requirements Signup and view all the answers

What is the role of the Canadian Standards Association (CSA) in plant safety programs?

To write safety standards used in plant safety programs Signup and view all the answers

What is the common element among the safety and health legislation of different jurisdictions in Canada?

They have similar legislation to the federal regulations Signup and view all the answers

What is the primary objective of a fire safety plan?

To enhance and maintain the safety of a facility or plant with respect to potential fire threats Signup and view all the answers

According to Ontario's Office of the Fire Marshal for Industrial Occupancies (OFM-TG-02-2000), what is the recommended number of steps in a fire safety plan?

10 steps Signup and view all the answers

What is hydrogen sulfide (H2S) commonly referred to as in coal mines?

Stink damp Signup and view all the answers

What is the typical state of hydrogen sulfide (H2S) when it is shipped to Eastern Canada?

Liquid state Signup and view all the answers

What is a required training for employees working in areas with potential H2S exposure?

Both H2S Aware and H2S Alive Signup and view all the answers

What is a hazard that workers in a trench face?

Engulfment Signup and view all the answers

What is required for trenching and digging work, in addition to a Safe Work Permit?

Ground Disturbance Permit Signup and view all the answers

How many employees must be working at the same time for an employer to ensure the presence of a first aid attendant?

Six or more Signup and view all the answers

What is the responsibility of a qualified first aid attendant?

To be in charge of first aid cases Signup and view all the answers

What is the minimum requirement for a first aid attendant in terms of training?

Training to provide resuscitation by mouth to mouth, cardiopulmonary, or an equivalent direct method Signup and view all the answers

What is the primary purpose of a Site Specific Occupational Health and Safety Policy?

To express a company's commitment to its employees' health and safety Signup and view all the answers

What is the minimum number of employees required for a workplace to establish a Joint Occupational Health and Safety Committee under federal jurisdiction?

20 Signup and view all the answers

What is one of the duties of the Workplace Health and Safety Committee?

To consider and quickly resolve health and safety complaints Signup and view all the answers

Why is it necessary to have designated employees serve as Wardens during an emergency?

To direct the evacuation process Signup and view all the answers

How often must emergency evacuation drills be carried out?

Once a year Signup and view all the answers

What is the purpose of bi-annual safety inspections?

To ensure fire escapes, exits, stairways, and fire equipment are in working order Signup and view all the answers

What is the primary purpose of a Joint Occupational Health and Safety Committee?

To promote and implement workplace health and safety Signup and view all the answers

What is the role of management in a health and safety program?

To take responsibility for health and safety Signup and view all the answers

What is the purpose of a process and procedure for accident and incident reports, audits, and investigations?

To identify the root cause of accidents Signup and view all the answers

What is site-specific safety training?

Specialized training required to address site-specific needs Signup and view all the answers

What is the primary objective of the Transportation of Dangerous Goods (TDG) regulations?

To ensure safe transportation of goods Signup and view all the answers

What is the minimum height at which fall protection equipment must be worn?

3 metres Signup and view all the answers

What is the purpose of a written and documented confined space entry program?

To outline entry requirements and procedures Signup and view all the answers

What is the focus of the Workplace Hazardous Materials Information System (WHMIS)?

Hazard communication and education Signup and view all the answers

What is the purpose of the Canadian Occupational Health and Safety Regulations?

To define a confined space Signup and view all the answers

What is required for employees who ship or receive dangerous goods covered by the TDG regulations?

Proper training and certification Signup and view all the answers

What is the purpose of a fire safety plan?

To develop safety procedures for fires in the workplace Signup and view all the answers

What is an example of a confined space that Power Engineers may encounter?

Both A and B Signup and view all the answers

What is the purpose of the Globally Harmonized System (GHS)?

To harmonize hazard classification and communication Signup and view all the answers

What is the primary responsibility of the employer regarding the Transportation of Dangerous Goods (TDG) regulations?

To ensure employees are trained and certified Signup and view all the answers

What is a necessary provision in a workplace where hazardous substances are present?

Eyewash facilities and showers Signup and view all the answers

What is the purpose of posting signs in the workplace?

To direct employees to first aid stations Signup and view all the answers

Why is asbestos considered a health hazard?

Its fibres can attach to the lungs and cause scar tissue Signup and view all the answers

What should be done when asbestos is disturbed during regular work operations?

The damaged area should be addressed immediately by certified insulators Signup and view all the answers

What is the primary reason for asbestos abatement programs?

To prevent health hazards from asbestos exposure Signup and view all the answers

What is true about the use of asbestos in Canada?

It is prohibited for new construction but allowed in existing plants Signup and view all the answers

Who should be trained to not disturb asbestos in the workplace?

All employees who work in the plant Signup and view all the answers

What should be done to asbestos that is not considered a safety hazard?

It should be left untouched Signup and view all the answers

What is the purpose of training employees about asbestos?

To direct them regarding regular operations around asbestos Signup and view all the answers

Why is it necessary to have a transportation plan to a medical treatment facility in place?

To ensure prompt medical attention in case of emergencies Signup and view all the answers

What is the primary objective of an occupational health and safety program in a workplace?

To prevent work-related accidents and occupational diseases Signup and view all the answers

What is the role of the Canadian Centre for Occupational Health and Safety (CCOHS) in plant safety programs?

To provide information regarding guidelines and requirements for safe work Signup and view all the answers

How do the safety and health legislations of different jurisdictions in Canada compare?

They are similar but with some differences Signup and view all the answers

What do the CCOHS, CSA, and jurisdictional requirements provide the basis for?

Occupational health and safety programs Signup and view all the answers

What is unique about each industrial plant site's occupational health and safety program?

It has its own specific focuses and requirements to meet its particular needs Signup and view all the answers

Why are plant safety programs required by law?

Because federal, provincial, and territorial law require them Signup and view all the answers

What is the primary purpose of a Joint Occupational Health and Safety Committee?

To consider and quickly resolve health and safety complaints Signup and view all the answers

What is a required element in the development of emergency response plans?

All of the above Signup and view all the answers

What is the purpose of regular and active promotion of workplace health and safety?

To promote a culture of safety in the workplace Signup and view all the answers

What is the minimum number of employees required for a workplace to establish a Joint Occupational Health and Safety Committee under federal jurisdiction?

20 Signup and view all the answers

What is the role of management in a health and safety program?

To ensure that the workplace is safe and healthy Signup and view all the answers

What is the purpose of bi-annual safety inspections?

To make sure fire escapes, exits, stairways, and fire equipment are all in working order Signup and view all the answers

What is required for employees who are appointed to the workplace health and safety committee?

Training and compensation for participating in meetings and carrying out their duties Signup and view all the answers

What is the purpose of site-specific safety training?

To address site-specific needs Signup and view all the answers

What is the purpose of a site-specific occupational health and safety policy?

To guide the company's actions and express a company's commitment to its employee's health and safety Signup and view all the answers

What is a necessary element in emergency response plans?

All of the above Signup and view all the answers

What is the primary objective of a fire safety plan in a facility?

To enhance and maintain the safety of the facility with respect to potential fire threats Signup and view all the answers

What is the recommended number of steps in a fire safety plan according to Ontario's Office of the Fire Marshal for Industrial Occupancies (OFM-TG-02-2000)?

10 steps Signup and view all the answers

What is the typical state of hydrogen sulfide (H2S) when it is shipped to Eastern Canada?

Liquid Signup and view all the answers

What is the minimum requirement for a first aid attendant in terms of training?

Resuscitation by mouth to mouth, cardiopulmonary, or an equivalent direct method Signup and view all the answers

What is a hazard that workers in a trench face?

Engulfment Signup and view all the answers

What is required for trenching and digging work, in addition to a Safe Work Permit?

Ground Disturbance Permit Signup and view all the answers

What is the purpose of a fire safety plan in a facility?

To enhance and maintain the safety of the facility with respect to potential fire threats Signup and view all the answers

What is hydrogen sulfide (H2S) commonly referred to as in coal mines?

Stink damp Signup and view all the answers

What is the purpose of a Ground Disturbance Permit?

To reduce hazards related to ground disturbance Signup and view all the answers

What is the responsibility of a qualified first aid attendant?

To take charge of first aid cases and cannot be overruled by others Signup and view all the answers

What is the primary reason for ensuring transportation to a medical treatment facility is available?

To provide a safe means of transporting injured employees Signup and view all the answers

What is the purpose of painting or covering asbestos insulation in older power plants?

To render the asbestos inert and prevent it from posing a safety hazard Signup and view all the answers

Why is it necessary to train employees on asbestos abatement?

To ensure that employees do not disturb asbestos during regular work operations Signup and view all the answers

What is the primary purpose of providing eyewash facilities and showers in the workplace?

To provide a means of responding to emergencies involving hazardous substances Signup and view all the answers

What is the purpose of posting signs directing employees to first aid stations and rooms?

To provide a means of directing employees to designated areas for medical treatment Signup and view all the answers

What is the primary reason for having Power Engineers trained in first aid?

To ensure that employees can respond to medical emergencies quickly Signup and view all the answers

What is the purpose of asbestos abatement programs in older power plants?

To prevent exposure to asbestos in the workplace Signup and view all the answers

Why is it necessary to have a plan in place for responding to emergencies involving hazardous substances?

To ensure that employees can prevent injuries and illnesses during emergencies Signup and view all the answers

What is the primary purpose of providing information on first aid stations and rooms to employees?

To provide a means of directing employees to designated areas for medical treatment Signup and view all the answers

What is the primary reason for having a system in place for responding to medical emergencies in the workplace?

To ensure that employees can prevent injuries and illnesses during emergencies Signup and view all the answers

What is the primary focus of the Transportation of Dangerous Goods (TDG) regulations?

The safe transportation of goods Signup and view all the answers

What is the main purpose of a written and documented confined space entry program?

To identify and mitigate hazards in confined spaces Signup and view all the answers

What is the primary responsibility of the employer regarding the Workplace Hazardous Materials Information System (WHMIS)?

To provide training on WHMIS to employees Signup and view all the answers

What is the minimum height at which fall protection equipment is required to be worn?

3 metres Signup and view all the answers

What is the primary focus of the Workplace Hazardous Materials Information System (WHMIS)?

To classify hazardous materials Signup and view all the answers

What is the purpose of a fire safety plan?

To reduce the risk of fire hazards Signup and view all the answers

What is required for employees who ship or receive dangerous goods covered by the TDG regulations?

Proper training and certification Signup and view all the answers

What is the primary purpose of the Canadian Occupational Health and Safety Regulations?

To identify and mitigate hazards in the workplace Signup and view all the answers

What is the primary focus of site-specific safety training?

To identify and mitigate site-specific hazards Signup and view all the answers

What is the primary purpose of the Globally Harmonized System (GHS)?

To classify hazardous materials Signup and view all the answers

What is the primary purpose of a safe work permit?

To identify and mitigate risks associated with a job Signup and view all the answers

Who reviews the safe work permit and agrees to its terms?

The permit issuer and the workers doing the job Signup and view all the answers

What is required if the scope of the job changes or the work lasts longer than the duration stated on the permit?

A new safe work permit must be issued Signup and view all the answers

What is a control measure that may be specified in a safe work permit?

Lockout requirements Signup and view all the answers

What is the authorized permit issuer in a safe work permit process?

The Shift Engineer or Assistant Shift Engineer Signup and view all the answers

What is the purpose of the signed safe work permit?

To serve as a legal agreement on the safety steps Signup and view all the answers

What is the purpose of opening and applying a warning tag to the drain valve?

To relieve pressure in the piping system Signup and view all the answers

Why is a group lockout used in a workplace?

To protect multiple workers who are required to work on locked out equipment Signup and view all the answers

What is the purpose of a master key in a group lockout?

To open all locks in a set Signup and view all the answers

What is the purpose of rendering equipment inoperative in a safety lockout?

To prevent accidental start-up Signup and view all the answers

What is verified before work proceeds in a lockout?

The correct breaker was opened and all isolation points were isolated effectively Signup and view all the answers

What is the minimum requirement for a safety lockout?

A level of protection equal to locking and tagging Signup and view all the answers

Why do workers need to remove their personal locks from the lockbox?

To ensure the safety of all personnel that are working on the equipment Signup and view all the answers

What is the purpose of a 'Do Not Operate' tag in a personal lockout?

To identify the owner of the lock Signup and view all the answers

What is the responsibility of the owner of a personal lock?

To carry the lock at all times Signup and view all the answers

What is the purpose of a lockbox in a group lockout?

To hold the master key and unused locks from the lock sets Signup and view all the answers

What is the purpose of a group lockout?

To secure equipment for multiple people Signup and view all the answers

Why are multiple lockouts sometimes required during maintenance shutdowns?

To separate lockouts for different parts of the equipment Signup and view all the answers

What is the role of a lockbox in a group lockout?

To secure equipment for multiple people Signup and view all the answers

What is the role of the two trained operators in a group lockout?

To perform the actual group lockout Signup and view all the answers

What is the purpose of a car seal in a lockout?

To provide a unique identifier for the lock Signup and view all the answers

What is the purpose of applying a personal lock to the chain or cable securing a valve?

To prevent other workers from accessing the valve Signup and view all the answers

What is the purpose of closing the minimum flow isolation valve?

To prevent the pump from operating during repairs Signup and view all the answers

What is the consequence of forcing a valve to move while it is still locked out?

There can be serious consequences for doing so Signup and view all the answers

What is the requirement for removing a personal lock?

Only the owner of the lock can remove it Signup and view all the answers

What is the purpose of the CSA Z460 standard?

To provide guidelines for lockout procedures Signup and view all the answers

Where can a lockbox be located?

Near the work area, process building, or permit issuing office Signup and view all the answers

What is included on the lockout sheet?

All of the above Signup and view all the answers

Why is a bump test performed at the local on/off hand switch?

To prove the motor will not start accidentally Signup and view all the answers

What is the purpose of a marked up as-built drawing?

To identify the isolation points Signup and view all the answers

What is required when a lockout requires modification?

Remove all personal locks from the lockbox Signup and view all the answers

What is the purpose of the car seal number on the lockout sheet?

To identify the lockbox Signup and view all the answers

Who signs off on the lockout sheet after all work is completed?

The supervisor or designate Signup and view all the answers

What happens to the lockout sheet after all work is completed?

It is signed off by the supervisor or designate Signup and view all the answers

What is the purpose of identifying equipment that is not locked out on the lockout sheet?

To record the changed state of the equipment Signup and view all the answers

What is the purpose of the lockout procedure?

To ensure the safety of the operator working on the locked out equipment Signup and view all the answers

What is the primary purpose of a Cold Work Permit?

For general maintenance work that does not produce an ignition source Signup and view all the answers

What is the responsibility of the permit issuer in the safe work permit process?

To identify potential hazards and detail safety precautions Signup and view all the answers

What is the purpose of lockouts in power plant equipment maintenance?

To provide a safeguard against energization during work Signup and view all the answers

What information is typically included in a general safe work permit?

The scope of work, number of workers involved, and potential hazards Signup and view all the answers

What type of safe work permit is required for work that produces a direct ignition source?

Hot Work Permit Signup and view all the answers

What is the responsibility of the permit receiver in the safe work permit process?

To understand the scope of work and job requirements Signup and view all the answers

What is the purpose of the job site preparation checklist in a safe work permit?

To ensure the work area is prepared and safe for work to begin Signup and view all the answers

What is the primary purpose of atmospheric testing in a Hot Work Permit?

To test the air quality in the work area Signup and view all the answers

What is the responsibility of the Power Engineer in relation to lockouts?

To put equipment in a safe state before it can be worked on Signup and view all the answers

What is the purpose of energy isolating devices in lockouts?

To provide a safeguard against energization during work Signup and view all the answers

What is the primary purpose of a safe work permit?

To identify and mitigate potential hazards associated with a job Signup and view all the answers

Who is responsible for reviewing the safe work permit and agreeing to its terms?

Both the worker performing the task and the company representative authorized to issue the permit Signup and view all the answers

What is required if the scope of the job changes or if the work lasts longer than the duration stated on the permit?

A new safe work permit must be issued Signup and view all the answers

What is the purpose of the control measures specified in the safe work permit?

To reduce the risk associated with a job Signup and view all the answers

Who signs the safe work permit after reviewing and agreeing to its terms?

The permit issuer, the permit holder, and the workers doing the job Signup and view all the answers

What is the purpose of specifying the energy isolation requirements in the safe work permit?

To ensure that all energy sources are dissipated and locked out Signup and view all the answers

What type of safe work permit is required for work that produces a direct ignition source such as welding or metal grinding?

Hot Work Permit Signup and view all the answers

What is the responsibility of the permit issuer in the safe work permit process?

To inspect the work area and identify potential hazards Signup and view all the answers

What is included in the contents of a general safe work permit?

All of the above Signup and view all the answers

What is the purpose of lockouts in power plant equipment maintenance?

To ensure that no one can operate or interfere with the equipment being worked on Signup and view all the answers

What is the responsibility of the permit receiver in the safe work permit process?

To understand the scope of work and job requirements Signup and view all the answers

What is required for employees who ship or receive dangerous goods covered by the TDG regulations?

Training on the Transportation of Dangerous Goods (TDG) regulations Signup and view all the answers

What is the purpose of a signed safe work permit?

To ensure that the worker has read and understood the safety procedures Signup and view all the answers

What is the primary focus of the Workplace Hazardous Materials Information System (WHMIS)?

To ensure that workers are trained on the safe handling of hazardous substances Signup and view all the answers

What is the consequence of forcing a valve to move while it is still locked out?

All of the above Signup and view all the answers

What is the purpose of a job site preparation checklist in a safe work permit?

To ensure that the work area is prepared and safe for the worker Signup and view all the answers

What is the level of protection required by the method used to render equipment inoperative?

Equal to, or greater than, that achieved by locking and tagging Signup and view all the answers

What happens if someone tries to force a valve to move while it is still locked out?

It may be possible to force the valve to move, but it is not recommended Signup and view all the answers

Who can remove a personal lock other than the owner of those locks?

No one Signup and view all the answers

What is the purpose of a 'Do Not Operate' tag attached beside the personal lock?

To identify the owner of the lock Signup and view all the answers

What is the main difference between a personal lockout and a group lockout?

The number of workers involved Signup and view all the answers

What is the purpose of a car seal in a lockout?

To provide a one-time seal that is stamped with a unique number Signup and view all the answers

What is the focus of the federal legislation in Canada regarding lockout?

Covers most generic lockout conditions that may occur in the Power Engineer's workplace Signup and view all the answers

What is the purpose of a personal lockout?

To secure equipment that only one worker will be working on Signup and view all the answers

What is required when a worker cannot do a personal lockout of equipment with their assigned locks?

They must request a group lockout Signup and view all the answers

What is the purpose of isolating all harmful energy sources before applying a personal lock or other approved securing device?

To prevent injury or damage from unexpected energization Signup and view all the answers

What is the purpose of opening the drain valve during the pump lockout procedure?

To relieve pressure in the piping system Signup and view all the answers

What is the primary benefit of using a group lockout in a multi-worker scenario?

It ensures that all workers are satisfied with the lockout procedure and sign off on the lockout sheet Signup and view all the answers

What is the purpose of the lockout isolation sheet in a group lockout?

To document the lockout procedure and any unused locks Signup and view all the answers

What is the significance of the unique identification number on each set of group locks?

It ensures that one master key can open all the locks of the set Signup and view all the answers

What is the purpose of verifying the lockout before work proceeds?

To confirm that the lockout procedure has been completed successfully Signup and view all the answers

What is the purpose of a lockbox in a group lockout?

To store the master key and lockout isolation sheet Signup and view all the answers

What is the significance of the master key in a group lockout?

It opens all the locks of the set with a single key Signup and view all the answers

What is the primary responsibility of the trained operators in a group lockout?

To perform the actual group lockout and apply the group locks Signup and view all the answers

What is the purpose of sealing the master key inside the lockbox with a car seal?

To prevent unauthorized access to the lockout procedure Signup and view all the answers

What is the requirement for removing a personal lock from the lockbox?

The worker must complete their task and sign off on the lockout sheet Signup and view all the answers

What is the primary purpose of identifying the equipment that is not locked out on the lockout sheet?

To identify equipment that may affect the safety of the operator working on the locked out equipment Signup and view all the answers

What is the purpose of the bump test in a motor control centre (MCC) during a lockout?

To prove that the motor will not start accidentally Signup and view all the answers

Why is it necessary to record the date the lockout was implemented on the lockout sheet?

To record the history of the lockout Signup and view all the answers

What is the purpose of the car seal in a lockout?

To provide access to the master key Signup and view all the answers

What is the purpose of the lockout procedure in a group lockout?

To ensure that the lockout is properly implemented and verified Signup and view all the answers

What is the purpose of the initials beside the lockout point entries on the lockout sheet?

To verify that the point has been locked out Signup and view all the answers

What is the purpose of the marked up as-built drawing, such as a P&ID, in a group lockout?

To provide a visual representation of the isolation points Signup and view all the answers

What is the responsibility of the supervisor or designate in a group lockout?

To verify that the lockout is properly implemented Signup and view all the answers

What is the purpose of the lockbox in a group lockout?

To secure the master key Signup and view all the answers

What is the purpose of the group lock set and number of locks used for the lockout?

To provide a unique identifier for the lockout Signup and view all the answers

4AE3 U4 C2 Review

Podcast Beta

Questions and Answers

What is the main purpose of an Occupational Health and Safety (OH&S) program?

What are the sources of guidelines and requirements for safe work in Canada?

Why are plant safety programs required by law?

What is unique about each industrial plant site's Occupational Health and Safety program?

What is the role of the Canadian Standards Association (CSA) in plant safety programs?

What is the common element among the safety and health legislation of different jurisdictions in Canada?

What is the primary objective of a fire safety plan?

According to Ontario's Office of the Fire Marshal for Industrial Occupancies (OFM-TG-02-2000), what is the recommended number of steps in a fire safety plan?

What is hydrogen sulfide (H2S) commonly referred to as in coal mines?

What is the typical state of hydrogen sulfide (H2S) when it is shipped to Eastern Canada?

What is a required training for employees working in areas with potential H2S exposure?

What is a hazard that workers in a trench face?

What is required for trenching and digging work, in addition to a Safe Work Permit?

How many employees must be working at the same time for an employer to ensure the presence of a first aid attendant?

What is the responsibility of a qualified first aid attendant?

What is the minimum requirement for a first aid attendant in terms of training?

What is the primary purpose of a Site Specific Occupational Health and Safety Policy?

What is the minimum number of employees required for a workplace to establish a Joint Occupational Health and Safety Committee under federal jurisdiction?

What is one of the duties of the Workplace Health and Safety Committee?

Why is it necessary to have designated employees serve as Wardens during an emergency?

How often must emergency evacuation drills be carried out?

What is the purpose of bi-annual safety inspections?

What is the primary purpose of a Joint Occupational Health and Safety Committee?

What is the role of management in a health and safety program?

What is the purpose of a process and procedure for accident and incident reports, audits, and investigations?

What is site-specific safety training?

What is the primary objective of the Transportation of Dangerous Goods (TDG) regulations?

What is the minimum height at which fall protection equipment must be worn?

What is the purpose of a written and documented confined space entry program?

What is the focus of the Workplace Hazardous Materials Information System (WHMIS)?

What is the purpose of the Canadian Occupational Health and Safety Regulations?

What is required for employees who ship or receive dangerous goods covered by the TDG regulations?

What is the purpose of a fire safety plan?

What is an example of a confined space that Power Engineers may encounter?

What is the purpose of the Globally Harmonized System (GHS)?

What is the primary responsibility of the employer regarding the Transportation of Dangerous Goods (TDG) regulations?

What is a necessary provision in a workplace where hazardous substances are present?

What is the purpose of posting signs in the workplace?

Why is asbestos considered a health hazard?

What should be done when asbestos is disturbed during regular work operations?

What is the primary reason for asbestos abatement programs?

What is true about the use of asbestos in Canada?

Who should be trained to not disturb asbestos in the workplace?

What should be done to asbestos that is not considered a safety hazard?

What is the purpose of training employees about asbestos?

Why is it necessary to have a transportation plan to a medical treatment facility in place?

What is the primary objective of an occupational health and safety program in a workplace?

What is the role of the Canadian Centre for Occupational Health and Safety (CCOHS) in plant safety programs?

How do the safety and health legislations of different jurisdictions in Canada compare?

What do the CCOHS, CSA, and jurisdictional requirements provide the basis for?

What is unique about each industrial plant site's occupational health and safety program?

Why are plant safety programs required by law?

What is the primary purpose of a Joint Occupational Health and Safety Committee?

What is a required element in the development of emergency response plans?

What is the purpose of regular and active promotion of workplace health and safety?

What is the minimum number of employees required for a workplace to establish a Joint Occupational Health and Safety Committee under federal jurisdiction?

What is the role of management in a health and safety program?

What is the purpose of bi-annual safety inspections?

What is required for employees who are appointed to the workplace health and safety committee?

What is the purpose of site-specific safety training?

What is the purpose of a site-specific occupational health and safety policy?

What is a necessary element in emergency response plans?

What is the primary objective of a fire safety plan in a facility?

What is the recommended number of steps in a fire safety plan according to Ontario's Office of the Fire Marshal for Industrial Occupancies (OFM-TG-02-2000)?

What is the typical state of hydrogen sulfide (H2S) when it is shipped to Eastern Canada?

What is the minimum requirement for a first aid attendant in terms of training?

What is a hazard that workers in a trench face?

What is required for trenching and digging work, in addition to a Safe Work Permit?

What is the purpose of a fire safety plan in a facility?

What is hydrogen sulfide (H2S) commonly referred to as in coal mines?

What is the purpose of a Ground Disturbance Permit?

What is the responsibility of a qualified first aid attendant?

What is the primary reason for ensuring transportation to a medical treatment facility is available?

What is the purpose of painting or covering asbestos insulation in older power plants?

Why is it necessary to train employees on asbestos abatement?

What is the primary purpose of providing eyewash facilities and showers in the workplace?

What is the purpose of posting signs directing employees to first aid stations and rooms?